Current File : //proc/dynamic_debug/control

# filename:lineno [module]function flags format
net/ipv6/netfilter/nf_reject_ipv6.c:323 [nf_reject_ipv6]nf_send_reset6 =_ "cannot alloc skb\012"
net/ipv6/netfilter/nf_reject_ipv6.c:283 [nf_reject_ipv6]nf_send_reset6 =_ "addr is not unicast.\012"
net/ipv6/netfilter/nf_reject_ipv6.c:189 [nf_reject_ipv6]nf_reject_ip6_tcphdr_get =_ "TCP checksum is invalid\012"
net/ipv6/netfilter/nf_reject_ipv6.c:183 [nf_reject_ipv6]nf_reject_ip6_tcphdr_get =_ "RST is set\012"
net/ipv6/netfilter/nf_reject_ipv6.c:171 [nf_reject_ipv6]nf_reject_ip6_tcphdr_get =_ "proto(%d) != IPPROTO_TCP or too short (len = %d)\012"
net/ipv6/netfilter/nf_reject_ipv6.c:163 [nf_reject_ipv6]nf_reject_ip6_tcphdr_get =_ "Cannot get TCP header.\012"
drivers/char/ipmi/ipmi_ssif.c:1851 [ipmi_ssif]ssif_probe =_ "ipmi_ssif: %s: i2c_probe found device at i2c address %x\012"
drivers/char/ipmi/ipmi_ssif.c:1729 [ipmi_ssif]ssif_probe =_ "ipmi_ssif: SSIF info too short: %d\012"
drivers/char/ipmi/ipmi_ssif.c:1096 [ipmi_ssif]sender =_ "ipmi_ssif: **Enqueue %02x %02x: %lld.%6.6ld\012"
drivers/char/ipmi/ipmi_ssif.c:937 [ipmi_ssif]msg_written_handler =_ "ipmi_ssif: %s: Out of retries\012"
drivers/char/ipmi/ipmi_ssif.c:913 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: DONE 2: state = %d.\012"
drivers/char/ipmi/ipmi_ssif.c:752 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: DONE 1: state = %d, result=%d\012"
drivers/char/ipmi/ipmi_ssif.c:725 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: Received message out of sequence, expected %u, got %u\012"
drivers/char/ipmi/ipmi_ssif.c:705 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: Received message too big\012"
drivers/char/ipmi/ipmi_ssif.c:695 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: Received middle message <31\012"
drivers/char/ipmi/ipmi_ssif.c:681 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: Middle message with no data\012"
drivers/char/ipmi/ipmi_ssif.c:648 [ipmi_ssif]msg_done_handler =_ "ipmi_ssif: %s: Error %d\012"
drivers/powercap/intel_rapl_msr.c:174 [intel_rapl_msr]rapl_msr_probe =_ "failed to register powercap control_type.\012"
drivers/powercap/intel_rapl_msr.c:103 [intel_rapl_msr]rapl_msr_read_raw =_ "failed to read msr 0x%x on cpu %d\012"
drivers/powercap/intel_rapl_common.c:1282 [intel_rapl_common]rapl_remove_package =_ "remove package, undo power limit on %s: %s\012"
drivers/powercap/intel_rapl_common.c:1248 [intel_rapl_common]rapl_detect_domains =_ "found %d domains on %s\012"
drivers/powercap/intel_rapl_common.c:1245 [intel_rapl_common]rapl_detect_domains =_ "no valid rapl domains found in %s\012"
drivers/powercap/intel_rapl_common.c:1162 [intel_rapl_common]rapl_package_register_powercap =_ "unregister %s domain %s\012"
drivers/powercap/intel_rapl_common.c:1148 [intel_rapl_common]rapl_package_register_powercap =_ "failed to register power_zone, %s:%s\012"
drivers/powercap/intel_rapl_common.c:1117 [intel_rapl_common]rapl_package_register_powercap =_ "failed to register power zone %s\012"
drivers/powercap/intel_rapl_common.c:1111 [intel_rapl_common]rapl_package_register_powercap =_ "register package domain %s\012"
drivers/powercap/intel_rapl_common.c:1086 [intel_rapl_common]rapl_update_domain_data =_ "update %s domain %s data\012"
drivers/powercap/intel_rapl_common.c:824 [intel_rapl_common]rapl_check_unit_atom =_ "Atom %s energy=%dpJ, time=%dus, power=%duW\012"
drivers/powercap/intel_rapl_common.c:796 [intel_rapl_common]rapl_check_unit_core =_ "Core CPU %s energy=%dpJ, time=%dus, power=%duW\012"
drivers/powercap/intel_rapl_common.c:722 [intel_rapl_common]rapl_read_data_raw =_ "failed to read reg 0x%llx on cpu %d\012"
drivers/powercap/intel_rapl_common.c:303 [intel_rapl_common]contraint_to_pl =_ "%s: index %d\012"
drivers/thermal/intel/x86_pkg_temp_thermal.c:170 [x86_pkg_temp_thermal]sys_get_trip_temp =_ "sys_get_trip_temp %d\012"
drivers/thermal/intel/x86_pkg_temp_thermal.c:135 [x86_pkg_temp_thermal]sys_get_curr_temp =_ "sys_get_curr_temp %d\012"
drivers/thermal/intel/intel_powerclamp.c:564 [intel_powerclamp]end_power_clamp =_ "clamping worker for cpu %d alive, destroy\012"
drivers/acpi/acpi_ipmi.c:419 [acpi_ipmi]ipmi_msg_handler =_ "Unexpected response (timeout).\012"
drivers/hwmon/coretemp.c:364 [coretemp]get_tjmax =_ "TjMax is %d degrees C\012"
drivers/char/ipmi/ipmi_kcs_sm.c:338 [ipmi_si]kcs_event =p "KCS: State = %d, %x\012"
drivers/char/ipmi/ipmi_kcs_sm.c:279 [ipmi_si]start_kcs_transaction =p "%s -"
drivers/char/ipmi/ipmi_kcs_sm.c:192 [ipmi_si]start_error_recovery =p "ipmi_kcs_sm: kcs hosed: %s\012"
drivers/char/ipmi/ipmi_smic_sm.c:544 [ipmi_si]smic_event =p "smic->state = %d\012"
drivers/char/ipmi/ipmi_smic_sm.c:526 [ipmi_si]smic_event =p "SMIC_READ_END: data = %02x\012"
drivers/char/ipmi/ipmi_smic_sm.c:445 [ipmi_si]smic_event =p "SMIC_WRITE_END: data = %02x\012"
drivers/char/ipmi/ipmi_smic_sm.c:353 [ipmi_si]smic_event =p "%s - state = %d, flags = 0x%02x, status = 0x%02x\012"
drivers/char/ipmi/ipmi_smic_sm.c:332 [ipmi_si]smic_event =p "%s - smic->smic_timeout = %ld, time = %ld\012"
drivers/char/ipmi/ipmi_smic_sm.c:160 [ipmi_si]smic_get_result =p "smic_get result -"
drivers/char/ipmi/ipmi_smic_sm.c:138 [ipmi_si]start_smic_transaction =p "%s -"
drivers/char/ipmi/ipmi_bt_sm.c:459 [ipmi_si]bt_event =p "BT: %s %s TO=%ld - %ld\012"
drivers/char/ipmi/ipmi_bt_sm.c:374 [ipmi_si]read_all_bytes =p "IPMI BT: bad packet: want 0x(%02X, %02X, %02X) got (%02X, %02X, %02X)\012"
drivers/char/ipmi/ipmi_bt_sm.c:358 [ipmi_si]read_all_bytes =p "got %d bytes seq=0x%02X"
drivers/char/ipmi/ipmi_bt_sm.c:346 [ipmi_si]read_all_bytes =p "bad raw rsp len=%d\012"
drivers/char/ipmi/ipmi_bt_sm.c:322 [ipmi_si]write_all_bytes =p "write %d bytes seq=0x%02X"
drivers/char/ipmi/ipmi_bt_sm.c:307 [ipmi_si]drain_BMC2HOST =p "stale response %s; "
drivers/char/ipmi/ipmi_bt_sm.c:281 [ipmi_si]reset_flags =p "flag reset %s\012"
drivers/char/ipmi/ipmi_bt_sm.c:267 [ipmi_si]bt_get_result =p "result %d bytes:"
drivers/char/ipmi/ipmi_bt_sm.c:223 [ipmi_si]bt_start_transaction =p "NetFn/LUN CMD [%d data]:"
drivers/char/ipmi/ipmi_bt_sm.c:222 [ipmi_si]bt_start_transaction =p "+++++++++++++++++ New command\012"
drivers/thermal/intel/intel_pch_thermal.c:332 [intel_pch_thermal]pch_critical =_ "%s: critical temperature reached\012"
drivers/i2c/busses/i2c-i801.c:1800 [i2c_i801]i801_probe =_ "SMBus using interrupt SMI#\012"
drivers/i2c/busses/i2c-i801.c:572 [i2c_i801]i801_isr_byte_done =_ "Discarding extra byte on block read\012"
drivers/i2c/busses/i2c-i801.c:436 [i2c_i801]i801_check_post =_ "Lost arbitration\012"
drivers/i2c/busses/i2c-i801.c:431 [i2c_i801]i801_check_post =_ "No response\012"
drivers/i2c/busses/i2c-i801.c:428 [i2c_i801]i801_check_post =_ "PEC error\012"
drivers/i2c/busses/i2c-i801.c:389 [i2c_i801]i801_check_post =_ "Terminating the current operation\012"
drivers/i2c/busses/i2c-i801.c:355 [i2c_i801]i801_check_pre =_ "Clearing aux status flags (%02x)\012"
drivers/i2c/busses/i2c-i801.c:333 [i2c_i801]i801_check_pre =_ "Clearing status flags (%02x)\012"
drivers/platform/x86/intel/pmc/core.c:2038 [intel_pmc_core]pmc_core_probe =_ "ignoring GBE LTR\012"
drivers/platform/x86/intel/pmc/core.c:629 [intel_pmc_core]pmc_core_get_tgl_lpm_reqs =_ "_DSM function 0 evaluation failed\012"
drivers/platform/x86/intel/pmc/core.c:623 [intel_pmc_core]pmc_core_get_tgl_lpm_reqs =_ "_DSM returned unexpected buffer size, have %u, expect %u\012"
drivers/misc/mei/pci-me.c:479 [mei_me]mei_me_pm_runtime_resume =_ "rpm: me: runtime resume ret = %d\012"
drivers/misc/mei/pci-me.c:467 [mei_me]mei_me_pm_runtime_resume =_ "rpm: me: runtime resume\012"
drivers/misc/mei/pci-me.c:454 [mei_me]mei_me_pm_runtime_suspend =_ "rpm: me: runtime suspend ret=%d\012"
drivers/misc/mei/pci-me.c:439 [mei_me]mei_me_pm_runtime_suspend =_ "rpm: me: runtime suspend\012"
drivers/misc/mei/pci-me.c:423 [mei_me]mei_me_pm_runtime_idle =_ "rpm: me: runtime_idle\012"
drivers/misc/mei/pci-me.c:366 [mei_me]mei_me_pci_suspend =_ "suspend\012"
drivers/misc/mei/pci-me.c:345 [mei_me]mei_me_remove =_ "stop\012"
drivers/misc/mei/pci-me.c:317 [mei_me]mei_me_shutdown =_ "shutdown\012"
drivers/misc/mei/pci-me.c:285 [mei_me]mei_me_probe =_ "initialization successful.\012"
drivers/misc/mei/hw-me.c:1428 [mei_me]mei_me_fw_type_sps_ign =_ "fw type is %d\012"
drivers/misc/mei/hw-me.c:1318 [mei_me]mei_me_irq_thread_handler =_ "interrupt thread end ret = %d\012"
drivers/misc/mei/hw-me.c:1283 [mei_me]mei_me_irq_thread_handler =_ "slots to read = %08x\012"
drivers/misc/mei/hw-me.c:1276 [mei_me]mei_me_irq_thread_handler =_ "Spurious Interrupt\012"
drivers/misc/mei/hw-me.c:1272 [mei_me]mei_me_irq_thread_handler =_ "we need to start the dev.\012"
drivers/misc/mei/hw-me.c:1248 [mei_me]mei_me_irq_thread_handler =_ "function called after ISR to handle the interrupt processing.\012"
drivers/misc/mei/hw-me.c:1223 [mei_me]mei_me_irq_quick_handler =_ "interrupt source 0x%08X\012"
drivers/misc/mei/hw-me.c:1082 [mei_me]mei_me_d0i3_intr =_ "d0i3 want resume\012"
drivers/misc/mei/hw-me.c:1066 [mei_me]mei_me_d0i3_intr =_ "d0i3 set host ready\012"
drivers/misc/mei/hw-me.c:1023 [mei_me]mei_me_d0i3_exit_sync =_ "d0i3 exit ret = %d\012"
drivers/misc/mei/hw-me.c:999 [mei_me]mei_me_d0i3_exit_sync =_ "d0i3 exit wait not needed\012"
drivers/misc/mei/hw-me.c:992 [mei_me]mei_me_d0i3_exit_sync =_ "d0i3 exit not needed\012"
drivers/misc/mei/hw-me.c:969 [mei_me]mei_me_d0i3_enter =_ "d0i3 enter\012"
drivers/misc/mei/hw-me.c:961 [mei_me]mei_me_d0i3_enter =_ "already d0i3 : set not needed\012"
drivers/misc/mei/hw-me.c:939 [mei_me]mei_me_d0i3_enter_sync =_ "d0i3 enter ret = %d\012"
drivers/misc/mei/hw-me.c:916 [mei_me]mei_me_d0i3_enter_sync =_ "d0i3 enter wait not needed\012"
drivers/misc/mei/hw-me.c:888 [mei_me]mei_me_d0i3_enter_sync =_ "d0i3 set not needed\012"
drivers/misc/mei/hw-me.c:817 [mei_me]mei_me_pg_is_enabled =_ "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\012"
drivers/misc/mei/hw-me.c:619 [mei_me]mei_me_count_full_read_slots =_ "filled_slots =%08x\012"
drivers/misc/mei/hw-me.c:564 [mei_me]mei_me_hbuf_write =_ "empty slots = %hu.\012"
drivers/misc/mei/hw-me.c:561 [mei_me]mei_me_hbuf_write =_ "hdr:host=%02d me=%02d len=%d dma=%1d ext=%1d internal=%1d comp=%1d"
drivers/misc/mei/hw-me.c:462 [mei_me]mei_me_hw_start =_ "hw is ready\012"
drivers/i2c/i2c-smbus.c:126 [i2c_smbus]smbus_alert =_ "SMBALERT# from dev 0x%02x, flag %d\012"
drivers/i2c/i2c-smbus.c:60 [i2c_smbus]smbus_do_alert =_ "alert with no driver\012"
drivers/misc/mei/init.c:342 [mei]mei_write_is_idle =_ "write pg: is idle[%d] state=%s ctrl=%01d write=%01d wwait=%01d\012"
drivers/misc/mei/init.c:303 [mei]mei_stop =_ "stopping the device.\012"
drivers/misc/mei/init.c:230 [mei]mei_start =_ "link layer has been established.\012"
drivers/misc/mei/init.c:226 [mei]mei_start =_ "MEI start failed.\012"
drivers/misc/mei/init.c:197 [mei]mei_start =_ "reset in start the mei device.\012"
drivers/misc/mei/init.c:163 [mei]mei_reset =_ "link is established start sending messages.\012"
drivers/misc/mei/init.c:152 [mei]mei_reset =_ "powering down: end of reset\012"
drivers/misc/mei/hbm.c:1594 [mei]mei_hbm_dispatch =_ "hbm: client dma unmap response: message received.\012"
drivers/misc/mei/hbm.c:1588 [mei]mei_hbm_dispatch =_ "hbm: client dma map response: message received.\012"
drivers/misc/mei/hbm.c:1583 [mei]mei_hbm_dispatch =_ "hbm: notification\012"
drivers/misc/mei/hbm.c:1578 [mei]mei_hbm_dispatch =_ "hbm: notify response received\012"
drivers/misc/mei/hbm.c:1574 [mei]mei_hbm_dispatch =_ "hbm: add client request processed\012"
drivers/misc/mei/hbm.c:1556 [mei]mei_hbm_dispatch =_ "hbm: add client request received\012"
drivers/misc/mei/hbm.c:1547 [mei]mei_hbm_dispatch =_ "hbm: stop request: message received\012"
drivers/misc/mei/hbm.c:1540 [mei]mei_hbm_dispatch =_ "hbm: disconnect request: message received\012"
drivers/misc/mei/hbm.c:1524 [mei]mei_hbm_dispatch =_ "hbm: stop response: message received\012"
drivers/misc/mei/hbm.c:1507 [mei]mei_hbm_dispatch =_ "hbm: enumeration response: on shutdown, ignoring\012"
drivers/misc/mei/hbm.c:1493 [mei]mei_hbm_dispatch =_ "hbm: enumeration response: message received\012"
drivers/misc/mei/hbm.c:1475 [mei]mei_hbm_dispatch =_ "hbm: properties response: %d CLIENT_NOT_FOUND\012"
drivers/misc/mei/hbm.c:1464 [mei]mei_hbm_dispatch =_ "hbm: properties response: on shutdown, ignoring\012"
drivers/misc/mei/hbm.c:1456 [mei]mei_hbm_dispatch =_ "hbm: properties response: message received.\012"
drivers/misc/mei/hbm.c:1449 [mei]mei_hbm_dispatch =_ "hbm: power gate isolation exit request received\012"
drivers/misc/mei/hbm.c:1442 [mei]mei_hbm_dispatch =_ "hbm: power gate isolation entry response received\012"
drivers/misc/mei/hbm.c:1435 [mei]mei_hbm_dispatch =_ "hbm: client flow control response: message received.\012"
drivers/misc/mei/hbm.c:1430 [mei]mei_hbm_dispatch =_ "hbm: client disconnect response: message received.\012"
drivers/misc/mei/hbm.c:1425 [mei]mei_hbm_dispatch =_ "hbm: client connect response: message received.\012"
drivers/misc/mei/hbm.c:1410 [mei]mei_hbm_dispatch =_ "hbm: dma setup not allowed\012"
drivers/misc/mei/hbm.c:1396 [mei]mei_hbm_dispatch =_ "hbm: dma setup response: on shutdown, ignoring\012"
drivers/misc/mei/hbm.c:1388 [mei]mei_hbm_dispatch =_ "hbm: dma setup response: message received.\012"
drivers/misc/mei/hbm.c:1356 [mei]mei_hbm_dispatch =_ "hbm: capabilities response: on shutdown, ignoring\012"
drivers/misc/mei/hbm.c:1348 [mei]mei_hbm_dispatch =_ "hbm: capabilities response: message received.\012"
drivers/misc/mei/hbm.c:1311 [mei]mei_hbm_dispatch =_ "hbm: start: on shutdown, ignoring\012"
drivers/misc/mei/hbm.c:1279 [mei]mei_hbm_dispatch =_ "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\012"
drivers/misc/mei/hbm.c:1273 [mei]mei_hbm_dispatch =_ "hbm: start: response message received.\012"
drivers/misc/mei/hbm.c:1267 [mei]mei_hbm_dispatch =_ "hbm: state is idle ignore spurious messages\012"
drivers/misc/mei/hbm.c:972 [mei]mei_hbm_cl_connect_res =_ "cl:host=%02d me=%02d hbm: connect response status=%s\012"
drivers/misc/mei/hbm.c:935 [mei]mei_hbm_cl_disconnect_res =_ "cl:host=%02d me=%02d hbm: disconnect response status=%d\012"
drivers/misc/mei/hbm.c:883 [mei]mei_hbm_cl_tx_flow_ctrl_creds_res =_ "cl:host=%02d me=%02d flow control creds = %d.\012"
drivers/misc/mei/hbm.c:854 [mei]mei_hbm_add_single_tx_flow_ctrl_creds =_ "recv flow ctrl msg ME %d (single) creds = %d.\012"
drivers/misc/mei/hbm.c:823 [mei]mei_hbm_cl_flow_control_req =_ "cl:host=%02d me=%02d sending flow control\012"
drivers/misc/mei/hbm.c:709 [mei]mei_hbm_cl_dma_unmap_res =_ "cl dma unmap succeeded\012"
drivers/misc/mei/hbm.c:679 [mei]mei_hbm_cl_dma_map_res =_ "cl dma map succeeded\012"
drivers/misc/mei/hbm.c:569 [mei]mei_hbm_cl_notify_stop_res =_ "cl:host=%02d me=%02d hbm: notify stop response status=%d\012"
drivers/misc/mei/hbm.c:543 [mei]mei_hbm_cl_notify_start_res =_ "cl:host=%02d me=%02d hbm: notify start response status=%d\012"
drivers/misc/mei/hbm.c:440 [mei]mei_hbm_add_cl_resp =_ "adding client response\012"
drivers/misc/mei/interrupt.c:561 [mei]mei_irq_write_handler =_ "complete write list cb.\012"
drivers/misc/mei/interrupt.c:507 [mei]mei_irq_write_handler =_ "complete control write list cb.\012"
drivers/misc/mei/interrupt.c:501 [mei]mei_irq_write_handler =_ "cl:host=%02d me=%02d MEI WRITE COMPLETE\012"
drivers/misc/mei/interrupt.c:495 [mei]mei_irq_write_handler =_ "complete all waiting for write cb.\012"
drivers/misc/mei/interrupt.c:426 [mei]mei_irq_read_handler =_ "cl:host=%02d me=%02d got a message\012"
drivers/misc/mei/interrupt.c:416 [mei]mei_irq_read_handler =_ "mei_hbm_dispatch failed ret = %d\012"
drivers/misc/mei/interrupt.c:392 [mei]mei_irq_read_handler =_ "extended header %d is %08x\012"
drivers/misc/mei/interrupt.c:372 [mei]mei_irq_read_handler =_ "extended header is %08x\012"
drivers/misc/mei/interrupt.c:354 [mei]mei_irq_read_handler =_ "hdr:host=%02d me=%02d len=%d dma=%1d ext=%1d internal=%1d comp=%1d"
drivers/misc/mei/interrupt.c:343 [mei]mei_irq_read_handler =_ "slots =%08x.\012"
drivers/misc/mei/interrupt.c:196 [mei]mei_cl_irq_read_msg =_ "cl:host=%02d me=%02d completed read length = %zu\012"
drivers/misc/mei/interrupt.c:179 [mei]mei_cl_irq_read_msg =_ "cl:host=%02d me=%02d message overflow. size %zu len %d idx %zu\012"
drivers/misc/mei/interrupt.c:161 [mei]mei_cl_irq_read_msg =_ "cl:host=%02d me=%02d not connected\012"
drivers/misc/mei/interrupt.c:150 [mei]mei_cl_irq_read_msg =_ "cl:host=%02d me=%02d vtag: %d\012"
drivers/misc/mei/interrupt.c:145 [mei]mei_cl_irq_read_msg =_ "cl:host=%02d me=%02d vtag not found in extended header.\012"
drivers/misc/mei/interrupt.c:79 [mei]mei_irq_discard_msg =_ "discarding message hdr:host=%02d me=%02d len=%d dma=%1d ext=%1d internal=%1d comp=%1d\012"
drivers/misc/mei/interrupt.c:38 [mei]mei_irq_compl_handler =_ "completing call back.\012"
drivers/misc/mei/client.c:2421 [mei]mei_cl_dma_unmap =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:2375 [mei]mei_cl_dma_unmap =_ "cl:host=%02d me=%02d client dma is not supported\012"
drivers/misc/mei/client.c:2345 [mei]mei_cl_dma_alloc_and_map =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:2298 [mei]mei_cl_dma_alloc_and_map =_ "cl:host=%02d me=%02d client dma with id %d is already allocated\012"
drivers/misc/mei/client.c:2284 [mei]mei_cl_dma_alloc_and_map =_ "cl:host=%02d me=%02d client dma is not supported\012"
drivers/misc/mei/client.c:2074 [mei]mei_cl_write =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:1995 [mei]mei_cl_write =_ "cl:host=%02d me=%02d Cannot acquire the host buffer: not sending.\012"
drivers/misc/mei/client.c:1989 [mei]mei_cl_write =_ "cl:host=%02d me=%02d No flow control credentials: not sending.\012"
drivers/misc/mei/client.c:1983 [mei]mei_cl_write =_ "cl:host=%02d me=%02d Extended Header %d vtag = %d\012"
drivers/misc/mei/client.c:1956 [mei]mei_cl_write =_ "cl:host=%02d me=%02d buf_len=%zd\012"
drivers/misc/mei/client.c:1858 [mei]mei_cl_irq_write =_ "cl:host=%02d me=%02d Extended Header %d vtag = %d\012"
drivers/misc/mei/client.c:1835 [mei]mei_cl_irq_write =_ "cl:host=%02d me=%02d No flow control credentials: not sending.\012"
drivers/misc/mei/client.c:1719 [mei]mei_cl_read_start =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:1632 [mei]mei_cl_notify_get =_ "cl:host=%02d me=%02d notifications not supported\012"
drivers/misc/mei/client.c:1598 [mei]mei_cl_notify =_ "cl:host=%02d me=%02d notify event"
drivers/misc/mei/client.c:1571 [mei]mei_cl_notify_request =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:1528 [mei]mei_cl_notify_request =_ "cl:host=%02d me=%02d notifications not supported\012"
drivers/misc/mei/client.c:1186 [mei]mei_cl_connect =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:1010 [mei]mei_cl_disconnect =_ "cl:host=%02d me=%02d rpm: autosuspend\012"
drivers/misc/mei/client.c:996 [mei]mei_cl_disconnect =_ "cl:host=%02d me=%02d Device is powering down, don't bother with disconnection\012"
drivers/misc/mei/client.c:984 [mei]mei_cl_disconnect =_ "cl:host=%02d me=%02d disconnecting"
drivers/misc/mei/client.c:959 [mei]__mei_cl_disconnect =_ "cl:host=%02d me=%02d successfully disconnected from FW client.\012"
drivers/misc/mei/client.c:951 [mei]__mei_cl_disconnect =_ "cl:host=%02d me=%02d timeout on disconnect from FW client.\012"
drivers/misc/mei/client.c:785 [mei]mei_cl_wake_all =_ "cl:host=%02d me=%02d Waking up ctrl write clients!\012"
drivers/misc/mei/client.c:780 [mei]mei_cl_wake_all =_ "cl:host=%02d me=%02d Waking up waiting for event clients!\012"
drivers/misc/mei/client.c:775 [mei]mei_cl_wake_all =_ "cl:host=%02d me=%02d Waking up writing client!\012"
drivers/misc/mei/client.c:770 [mei]mei_cl_wake_all =_ "cl:host=%02d me=%02d Waking up reading client!\012"
drivers/misc/mei/client.c:749 [mei]mei_hbuf_acquire =_ "hbuf is not ready\012"
drivers/misc/mei/client.c:744 [mei]mei_hbuf_acquire =_ "device is in pg\012"
drivers/misc/mei/client.c:730 [mei]mei_host_client_init =_ "rpm: autosuspend\012"
drivers/misc/mei/client.c:701 [mei]mei_cl_unlink =_ "cl:host=%02d me=%02d unlink client"
drivers/misc/mei/client.c:677 [mei]mei_cl_link =_ "cl:host=%02d me=%02d link cl\012"
drivers/misc/mei/client.c:579 [mei]mei_cl_flush_queues =_ "cl:host=%02d me=%02d remove list entry belonging to cl\012"
drivers/misc/mei/client.c:287 [mei]mei_me_cl_rm_by_uuid_id =_ "remove %pUl %d\012"
drivers/misc/mei/client.c:265 [mei]mei_me_cl_rm_by_uuid =_ "remove %pUl\012"
drivers/misc/mei/main.c:757 [mei]mei_ioctl =_ "failed to copy data to userland\012"
drivers/misc/mei/main.c:754 [mei]mei_ioctl =_ "copy connect data to user\012"
drivers/misc/mei/main.c:749 [mei]mei_ioctl =_ ": IOCTL_MEI_NOTIFY_GET.\012"
drivers/misc/mei/main.c:741 [mei]mei_ioctl =_ "failed to copy data from userland\012"
drivers/misc/mei/main.c:738 [mei]mei_ioctl =_ ": IOCTL_MEI_NOTIFY_SET.\012"
drivers/misc/mei/main.c:730 [mei]mei_ioctl =_ "failed to copy data to userland\012"
drivers/misc/mei/main.c:718 [mei]mei_ioctl =_ "vtag can't be zero\012"
drivers/misc/mei/main.c:712 [mei]mei_ioctl =_ "FW Client %pUl does not support vtags\012"
drivers/misc/mei/main.c:701 [mei]mei_ioctl =_ "failed to copy data from userland\012"
drivers/misc/mei/main.c:698 [mei]mei_ioctl =_ "IOCTL_MEI_CONNECT_CLIENT_VTAG\012"
drivers/misc/mei/main.c:690 [mei]mei_ioctl =_ "failed to copy data to userland\012"
drivers/misc/mei/main.c:669 [mei]mei_ioctl =_ "failed to copy data from userland\012"
drivers/misc/mei/main.c:667 [mei]mei_ioctl =_ ": IOCTL_MEI_CONNECT_CLIENT.\012"
drivers/misc/mei/main.c:657 [mei]mei_ioctl =_ "IOCTL cmd = 0x%x"
drivers/misc/mei/main.c:547 [mei]mei_ioctl_connect_vtag =_ "replacing with existing cl\012"
drivers/misc/mei/main.c:516 [mei]mei_ioctl_connect_vtag =_ "FW Client %pUl vtag %d\012"
drivers/misc/mei/main.c:481 [mei]mei_vt_support_check =_ "Cannot connect to FW Client UUID = %pUl\012"
drivers/misc/mei/main.c:449 [mei]mei_ioctl_connect_client =_ "Can connect?\012"
drivers/misc/mei/main.c:443 [mei]mei_ioctl_connect_client =_ "FW Client - Max Msg Len = %d\012"
drivers/misc/mei/main.c:441 [mei]mei_ioctl_connect_client =_ "FW Client - Protocol Version = %d\012"
drivers/misc/mei/main.c:439 [mei]mei_ioctl_connect_client =_ "Connect to FW Client ID = %d\012"
drivers/misc/mei/main.c:432 [mei]mei_ioctl_connect_client =_ "Connection forbidden to FW Client UUID = %pUl\012"
drivers/misc/mei/main.c:422 [mei]mei_ioctl_connect_client =_ "Cannot connect to FW Client UUID = %pUl\012"
drivers/misc/mei/main.c:380 [mei]mei_write =_ "failed to copy data from userland\012"
drivers/misc/mei/main.c:330 [mei]mei_write =_ "cl:host=%02d me=%02d is not connected"
drivers/misc/mei/main.c:273 [mei]mei_read =_ "cl:host=%02d me=%02d end mei read rets = %zd\012"
drivers/misc/mei/main.c:257 [mei]mei_read =_ "failed to copy data to userland\012"
drivers/misc/mei/main.c:245 [mei]mei_read =_ "cl:host=%02d me=%02d buf.size = %zu buf.idx = %zu offset = %lld\012"
drivers/misc/mei/main.c:241 [mei]mei_read =_ "cl:host=%02d me=%02d read operation failed %zd\012"
drivers/misc/mei/main.c:207 [mei]mei_read =_ "cl:host=%02d me=%02d mei start read failure status = %zd\012"
drivers/misc/mei/main.c:144 [mei]mei_release =_ "cl:host=%02d me=%02d removing\012"
drivers/misc/mei/main.c:138 [mei]mei_release =_ "cl:host=%02d me=%02d not the last vtag after disconnect\012"
drivers/misc/mei/main.c:126 [mei]mei_release =_ "cl:host=%02d me=%02d not the last vtag\012"
drivers/misc/mei/main.c:57 [mei]mei_open =_ "dev_state != MEI_ENABLED  dev_state = %s\012"
drivers/misc/mei/dma-ring.c:253 [mei]mei_dma_ring_write =_ "writing to dma %u bytes\012"
drivers/misc/mei/dma-ring.c:176 [mei]mei_dma_ring_read =_ "reading from dma %u bytes\012"
drivers/misc/mei/bus.c:1323 [mei]mei_cldev_driver_unregister =_ "mei: driver [%s] unregistered\012"
drivers/misc/mei/bus.c:1313 [mei]__mei_cldev_driver_register =_ "mei: driver [%s] registered\012"
drivers/misc/mei/bus.c:1289 [mei]mei_cl_bus_rescan =_ "rescan end"
drivers/misc/mei/bus.c:1238 [mei]mei_cl_bus_dev_init =_ "initializing %pUl"
drivers/misc/mei/bus.c:1151 [mei]mei_cl_bus_dev_add =_ "adding %pUL:%02X\012"
drivers/misc/mei/bus.c:746 [mei]mei_cldev_disable =_ "Already disconnected\012"
drivers/misc/mei/bus-fixup.c:469 [mei]mei_nfc =_ "end of fixup match = %d\012"
drivers/misc/mei/bus-fixup.c:450 [mei]mei_nfc =_ "nfc radio %s\012"
drivers/misc/mei/bus-fixup.c:200 [mei]mei_fwver =_ "FW version%d %d:%d.%d.%d.%d\012"
drivers/char/ipmi/ipmi_msghandler.c:4592 [ipmi_msghandler]smi_from_recv_msg =_ "Resend: %*ph\012"
drivers/char/ipmi/ipmi_msghandler.c:4233 [ipmi_msghandler]handle_one_recv_msg =_ "Recv: %*ph\012"
drivers/char/ipmi/ipmi_msghandler.c:3746 [ipmi_msghandler]handle_ipmb_get_msg_cmd =_ "Invalid command: %*ph\012"
drivers/char/ipmi/ipmi_msghandler.c:2261 [ipmi_msghandler]i_ipmi_request =_ "Send: %*ph\012"
drivers/input/joydev.c:801 [joydev]joydev_dev_is_blacklisted =_ "joydev: blacklisting '%s'\012"
drivers/md/dm.c:2420 [dm_mod]__dm_suspend =_ "device-mapper: core: %s: suspending with flush\012"
drivers/md/dm.c:460 [dm_mod]dm_blk_ioctl =_ "device-mapper: core: %s: sending ioctl %x to DM device without required privilege.\012"
drivers/md/dm-ioctl.c:1543 [dm_mod]table_clear =_ "device-mapper: ioctl: device doesn't appear to be in the dev hash table.\012"
drivers/md/dm-ioctl.c:1132 [dm_mod]do_resume =_ "device-mapper: ioctl: device doesn't appear to be in the dev hash table.\012"
drivers/md/dm-ioctl.c:974 [dm_mod]dev_remove =_ "device-mapper: ioctl: unable to remove open device %s\012"
drivers/md/dm-ioctl.c:957 [dm_mod]dev_remove =_ "device-mapper: ioctl: device doesn't appear to be in the dev hash table.\012"
fs/fuse/inode.c:2026 [fuse]fuse_exit =_ "exit\012"
fs/fuse/dax.c:1256 [fuse]fuse_dax_mem_range_init =_ "%s: dax mapped %ld pages. nr_ranges=%ld\012"
fs/fuse/dax.c:1251 [fuse]fuse_dax_mem_range_init =_ "dax_direct_access() returned %ld\012"
fs/fuse/dax.c:1203 [fuse]fuse_dax_free_mem_worker =_ "fuse: try_to_free_dmap_chunks() failed with err=%d\012"
fs/fuse/dax.c:1125 [fuse]lookup_and_reclaim_dmap =_ "virtio_fs: fuse_dax_break_layouts() failed. err=%d\012"
fs/fuse/dax.c:1015 [fuse]inode_inline_reclaim_one_dmap =_ "fuse: %s: inline reclaimed memory range. inode=%p, window_offset=0x%llx, length=0x%llx\012"
fs/fuse/dax.c:980 [fuse]inode_inline_reclaim_one_dmap =_ "fuse: fuse_dax_break_layouts() failed. err=%d\012"
fs/fuse/dax.c:887 [fuse]dmap_writeback_invalidate =_ "fuse: invalidate_inode_pages2_range() failed err=%d\012"
fs/fuse/dax.c:878 [fuse]dmap_writeback_invalidate =_ "fuse: filemap_fdatawrite_range() failed. err=%d start_pos=0x%llx, end_pos=0x%llx\012"
fs/fuse/dax.c:630 [fuse]fuse_iomap_begin =_ "%s returning hole mapping. pos=0x%llx length_asked=0x%llx length_returned=0x%llx\012"
fs/fuse/dax.c:615 [fuse]fuse_iomap_begin =_ "%s: no mapping at offset 0x%llx length 0x%llx\012"
fs/fuse/dax.c:604 [fuse]fuse_iomap_begin =_ "%s: Upgrading mapping at offset 0x%llx length 0x%llx\012"
fs/fuse/dax.c:294 [fuse]dmap_reinit_add_to_free_pool =_ "fuse: freeing memory range start_idx=0x%lx end_idx=0x%lx window_offset=0x%llx length=0x%llx\012"
drivers/ata/ahci.c:731 [ahci]ahci_pci_init_controller =_ "PORT_IRQ_STAT 0x%x\012"
drivers/ata/libahci.c:1267 [libahci]ahci_init_controller =_ "HOST_CTL 0x%x\012"
drivers/ata/libahci.c:1264 [libahci]ahci_init_controller =_ "HOST_CTL 0x%x\012"
drivers/ata/libahci.c:1216 [libahci]ahci_port_clear_pending_irq =_ "PORT_IRQ_STAT 0x%x\012"
drivers/ata/libahci.c:1211 [libahci]ahci_port_clear_pending_irq =_ "PORT_SCR_ERR 0x%x\012"
drivers/net/ethernet/intel/igb/igb_main.c:9547 [igb]igb_io_resume =_ "Resuming from non-fatal error, do nothing.\012"
drivers/net/ethernet/intel/igb/igb_main.c:8539 [igb]igb_rx_checksum =_ "cksum success: bits %08X\012"
drivers/net/ethernet/intel/igb/igb_main.c:6563 [igb]igb_change_mtu =_ "changing MTU from %d to %d\012"
drivers/net/ethernet/intel/igb/igb_main.c:1989 [igb]igb_setup_tx_mode =_ "FQTSS %s\012"
drivers/net/ethernet/intel/igb/igb_main.c:1863 [igb]igb_config_tx_modes =_ "Qav Tx mode: cbs %s, launchtime %s, queue %d idleslope %d sendslope %d hiCredit %d locredit %d\012"
drivers/net/ethernet/intel/igb/igb_ethtool.c:3206 [igb]igb_get_module_info =_ "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2627 [igb]igb_set_eee_i350 =_ "LPI Clock Stop Bit should not be set!\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2487 [igb]igb_update_nvm_checksum_82580 =_ "NVM Write Error while updating checksum compatibility bit.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2477 [igb]igb_update_nvm_checksum_82580 =_ "NVM Read Error while updating checksum compatibility bit.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2438 [igb]igb_validate_nvm_checksum_82580 =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2415 [igb]igb_update_nvm_checksum_with_offset =_ "NVM Write Error while updating checksum.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2406 [igb]igb_update_nvm_checksum_with_offset =_ "NVM Read Error while updating checksum.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2378 [igb]igb_validate_nvm_checksum_with_offset =_ "NVM Checksum Invalid\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2371 [igb]igb_validate_nvm_checksum_with_offset =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2320 [igb]igb_reset_hw_82580 =_ "Could not reset MDICNFG based on EEPROM\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2308 [igb]igb_reset_hw_82580 =_ "Auto Read Done did not complete\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2276 [igb]igb_reset_hw_82580 =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2274 [igb]igb_reset_hw_82580 =_ "PCI-E Master disable polling has failed.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:2229 [igb]igb_reset_mdicnfg_82580 =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1976 [igb]igb_rx_fifo_flush_82575 =_ "Queue disable timed out after 10ms\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1811 [igb]igb_reset_init_script_82575 =_ "Running reset init script for 82575\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1776 [igb]igb_setup_serdes_link_82575 =_ "Configuring Forced Link:PCS_LCTL=0x%08X\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1768 [igb]igb_setup_serdes_link_82575 =_ "Configuring Autoneg:PCS_LCTL=0x%08X\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1713 [igb]igb_setup_serdes_link_82575 =_ "
7NVM Read Error\012\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1603 [igb]igb_setup_copper_link_82575 =_ "Error resetting the PHY.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1544 [igb]igb_init_hw_82575 =_ "Zeroing the UTA\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1539 [igb]igb_init_hw_82575 =_ "Zeroing the MTA\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1532 [igb]igb_init_hw_82575 =_ "Initializing the IEEE VLAN\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1527 [igb]igb_init_hw_82575 =_ "Error initializing identification LED\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1488 [igb]igb_reset_hw_82575 =_ "Auto Read Done did not complete\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1479 [igb]igb_reset_hw_82575 =_ "Issuing a global reset to MAC\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1468 [igb]igb_reset_hw_82575 =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1466 [igb]igb_reset_hw_82575 =_ "PCI-E Set completion timeout has failed.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1461 [igb]igb_reset_hw_82575 =_ "PCI-E Master disable polling has failed.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1403 [igb]igb_get_pcs_speed_and_duplex_82575 =_ "Full Duplex\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1402 [igb]igb_get_pcs_speed_and_duplex_82575 =_ "2500 Mbs, "
drivers/net/ethernet/intel/igb/e1000_82575.c:1312 [igb]igb_check_for_link_82575 =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1249 [igb]igb_get_cfg_done_82575 =_ "MNG configuration cycle has not completed.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:1184 [igb]igb_acquire_swfw_sync_82575 =_ "Driver can't access resource, SW_FW_SYNC timeout.\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:927 [igb]igb_phy_hw_reset_sgmii_82575 =_ "Soft resetting SGMII attached PHY...\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:892 [igb]igb_get_phy_id_82575 =_ "PHY address %u was unreadable\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:884 [igb]igb_get_phy_id_82575 =_ "Vendor ID 0x%08X read at address %u\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:800 [igb]igb_write_phy_reg_sgmii_82575 =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:768 [igb]igb_read_phy_reg_sgmii_82575 =_ "PHY Address %u is out of range\012"
drivers/net/ethernet/intel/igb/e1000_82575.c:541 [igb]igb_set_sfp_media_type_82575 =_ "PHY module has not been recognized\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1635 [igb]igb_write_8bit_ctrl_reg =_ "Reg %08x did not indicate ready\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1596 [igb]igb_validate_mdi_setting =_ "Invalid MDI setting detected\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1571 [igb]igb_disable_pcie_master =_ "Master requests are pending.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1371 [igb]igb_valid_led_default =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1348 [igb]igb_get_auto_rd_done =_ "Auto read by HW from NVM has not completed.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1302 [igb]igb_get_hw_semaphore =_ "Driver can't access the NVM\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1282 [igb]igb_get_hw_semaphore =_ "Driver can't access device - SMBI bit is set.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1252 [igb]igb_get_speed_and_duplex_copper =_ "Half Duplex\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1249 [igb]igb_get_speed_and_duplex_copper =_ "Full Duplex\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1244 [igb]igb_get_speed_and_duplex_copper =_ "10 Mbs, "
drivers/net/ethernet/intel/igb/e1000_mac.c:1241 [igb]igb_get_speed_and_duplex_copper =_ "100 Mbs, "
drivers/net/ethernet/intel/igb/e1000_mac.c:1238 [igb]igb_get_speed_and_duplex_copper =_ "1000 Mbs, "
drivers/net/ethernet/intel/igb/e1000_mac.c:1212 [igb]igb_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1200 [igb]igb_config_fc_after_link_up =_ "Flow Control = NONE.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1194 [igb]igb_config_fc_after_link_up =_ "Flow Control = Rx PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1180 [igb]igb_config_fc_after_link_up =_ "Flow Control = Tx PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1165 [igb]igb_config_fc_after_link_up =_ "Flow Control = Rx PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1162 [igb]igb_config_fc_after_link_up =_ "Flow Control = FULL.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1106 [igb]igb_config_fc_after_link_up =_ "PCS Auto Neg has not completed.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1089 [igb]igb_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1077 [igb]igb_config_fc_after_link_up =_ "Error getting link speed and duplex\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1068 [igb]igb_config_fc_after_link_up =_ "Flow Control = RX PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1065 [igb]igb_config_fc_after_link_up =_ "Flow Control = NONE.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1039 [igb]igb_config_fc_after_link_up =_ "Flow Control = RX PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1025 [igb]igb_config_fc_after_link_up =_ "Flow Control = TX PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1010 [igb]igb_config_fc_after_link_up =_ "Flow Control = RX PAUSE frames only.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:1007 [igb]igb_config_fc_after_link_up =_ "Flow Control = FULL.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:945 [igb]igb_config_fc_after_link_up =_ "Copper PHY and Auto Neg has not completed.\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:921 [igb]igb_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:879 [igb]igb_force_mac_fc =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:861 [igb]igb_force_mac_fc =_ "hw->fc.current_mode = %u\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:812 [igb]igb_set_default_fc =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:715 [igb]igb_setup_link =_ "Initializing the Flow Control address, type and timer regs\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:703 [igb]igb_setup_link =_ "After fix-ups FlowControl is now = %x\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:662 [igb]igb_check_for_copper_link =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:509 [igb]igb_i21x_hw_doublecheck =_ "Failed to update MTA_REGISTER, too many retries"
drivers/net/ethernet/intel/igb/e1000_mac.c:333 [igb]igb_check_alt_mac_addr =_ "Ignoring Alternate Mac Address with MC bit set\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:323 [igb]igb_check_alt_mac_addr =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:303 [igb]igb_check_alt_mac_addr =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:118 [igb]igb_init_rx_addrs =_ "Clearing RAR[1-%u]\012"
drivers/net/ethernet/intel/igb/e1000_mac.c:113 [igb]igb_init_rx_addrs =_ "Programming MAC Address into RAR[0]\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:674 [igb]igb_update_nvm_checksum =_ "NVM Write Error while updating checksum.\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:666 [igb]igb_update_nvm_checksum =_ "NVM Read Error while updating checksum.\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:640 [igb]igb_validate_nvm_checksum =_ "NVM Checksum Invalid\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:633 [igb]igb_validate_nvm_checksum =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:576 [igb]igb_read_part_string =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:564 [igb]igb_read_part_string =_ "PBA string buffer too small\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:558 [igb]igb_read_part_string =_ "NVM PBA number section invalid length\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:553 [igb]igb_read_part_string =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:521 [igb]igb_read_part_string =_ "PBA string buffer too small\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:517 [igb]igb_read_part_string =_ "NVM PBA number is not stored as string\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:508 [igb]igb_read_part_string =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:502 [igb]igb_read_part_string =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:495 [igb]igb_read_part_string =_ "PBA string buffer was null\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:421 [igb]igb_write_nvm_spi =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:376 [igb]igb_read_nvm_eerd =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:318 [igb]igb_read_nvm_spi =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:286 [igb]igb_ready_nvm_eeprom =_ "SPI NVM Status error\012"
drivers/net/ethernet/intel/igb/e1000_nvm.c:179 [igb]igb_acquire_nvm =_ "Could not acquire NVM grant\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2520 [igb]igb_get_phy_info_82580 =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2487 [igb]igb_phy_force_speed_duplex_82580 =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2480 [igb]igb_phy_force_speed_duplex_82580 =_ "Waiting for forced speed/duplex link on 82580 phy\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2475 [igb]igb_phy_force_speed_duplex_82580 =_ "I82580_PHY_CTRL_2: %X\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2367 [igb]igb_initialize_M88E1543_phy =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2273 [igb]igb_initialize_M88E1512_phy =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:2124 [igb]igb_phy_init_script_igp3 =_ "Running IGP 3 PHY init script\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1998 [igb]igb_get_phy_info_igp =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1928 [igb]igb_get_phy_info_m88 =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1918 [igb]igb_get_phy_info_m88 =_ "Phy info is only valid for copper media\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1373 [igb]igb_phy_force_speed_duplex_setup =_ "Forcing 10mb\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1368 [igb]igb_phy_force_speed_duplex_setup =_ "Forcing 100mb\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1360 [igb]igb_phy_force_speed_duplex_setup =_ "Full Duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1356 [igb]igb_phy_force_speed_duplex_setup =_ "Half Duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1262 [igb]igb_phy_force_speed_duplex_m88 =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1239 [igb]igb_phy_force_speed_duplex_m88 =_ "Waiting for forced speed/duplex link on M88 phy.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1220 [igb]igb_phy_force_speed_duplex_m88 =_ "M88E1000 PSCR: %X\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1175 [igb]igb_phy_force_speed_duplex_igp =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1168 [igb]igb_phy_force_speed_duplex_igp =_ "Waiting for forced speed/duplex link on IGP phy.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1163 [igb]igb_phy_force_speed_duplex_igp =_ "IGP PSCR: %X\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1117 [igb]igb_setup_copper_link =_ "Unable to establish link!!!\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1113 [igb]igb_setup_copper_link =_ "Valid link established!!!\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1100 [igb]igb_setup_copper_link =_ "Error Forcing Speed and Duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1097 [igb]igb_setup_copper_link =_ "Forcing Speed and Duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1058 [igb]igb_phy_setup_autoneg =_ "Auto-Neg Advertising %x\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:1049 [igb]igb_phy_setup_autoneg =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:995 [igb]igb_phy_setup_autoneg =_ "Advertise 1000mb Full duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:991 [igb]igb_phy_setup_autoneg =_ "Advertise 1000mb Half duplex request denied!\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:985 [igb]igb_phy_setup_autoneg =_ "Advertise 100mb Full duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:979 [igb]igb_phy_setup_autoneg =_ "Advertise 100mb Half duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:973 [igb]igb_phy_setup_autoneg =_ "Advertise 10mb Full duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:967 [igb]igb_phy_setup_autoneg =_ "Advertise 10mb Half duplex\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:963 [igb]igb_phy_setup_autoneg =_ "autoneg_advertised %x\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:904 [igb]igb_copper_link_autoneg =_ "Error while waiting for autoneg to complete\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:884 [igb]igb_copper_link_autoneg =_ "Restarting Auto-Neg\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:881 [igb]igb_copper_link_autoneg =_ "Error Setting up Auto-Negotiation\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:878 [igb]igb_copper_link_autoneg =_ "Reconfiguring auto-neg advertisement params\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:760 [igb]igb_copper_link_setup_igp =_ "Error Disabling LPLU D0\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:752 [igb]igb_copper_link_setup_igp =_ "Error Disabling LPLU D3\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:735 [igb]igb_copper_link_setup_igp =_ "Error resetting the PHY.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:705 [igb]igb_copper_link_setup_m88_gen2 =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:689 [igb]igb_copper_link_setup_m88_gen2 =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:611 [igb]igb_copper_link_setup_m88 =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:469 [igb]igb_copper_link_setup_82580 =_ "Error resetting the PHY.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:362 [igb]igb_read_sfp_data_byte =_ "I2CCMD Error bit set\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:358 [igb]igb_read_sfp_data_byte =_ "I2CCMD Read did not complete\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:337 [igb]igb_read_sfp_data_byte =_ "I2CCMD command address exceeds upper limit\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:310 [igb]igb_write_phy_reg_i2c =_ "I2CCMD Error bit set\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:306 [igb]igb_write_phy_reg_i2c =_ "I2CCMD Write did not complete\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:279 [igb]igb_write_phy_reg_i2c =_ "PHY I2C Address %d is out of range.\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:253 [igb]igb_read_phy_reg_i2c =_ "I2CCMD Error bit set\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:249 [igb]igb_read_phy_reg_i2c =_ "I2CCMD Read did not complete\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:208 [igb]igb_write_phy_reg_mdic =_ "MDI Error\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:203 [igb]igb_write_phy_reg_mdic =_ "MDI Write did not complete\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:176 [igb]igb_write_phy_reg_mdic =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:151 [igb]igb_read_phy_reg_mdic =_ "MDI Error\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:146 [igb]igb_read_phy_reg_mdic =_ "MDI Read did not complete\012"
drivers/net/ethernet/intel/igb/e1000_phy.c:120 [igb]igb_read_phy_reg_mdic =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:909 [igb]igb_get_cfg_done_i210 =_ "MNG configuration cycle has not completed.\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:705 [igb]igb_valid_led_default_i210 =_ "NVM Read Error\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:685 [igb]igb_update_flash_i210 =_ "Flash update complete\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:683 [igb]igb_update_flash_i210 =_ "Flash update time out\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:674 [igb]igb_update_flash_i210 =_ "Flash update time out\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:609 [igb]igb_update_nvm_checksum_i210 =_ "NVM Write Error while updating checksum.\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:599 [igb]igb_update_nvm_checksum_i210 =_ "NVM Read Error while updating checksum.\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:585 [igb]igb_update_nvm_checksum_i210 =_ "EEPROM read failed\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:430 [igb]igb_read_invm_i210 =_ "NVM word 0x%02x is not mapped.\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:380 [igb]igb_read_invm_i210 =_ "MAC Addr not found in iNVM\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:353 [igb]igb_read_invm_word_i210 =_ "Requested word 0x%02x not found in OTP\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:345 [igb]igb_read_invm_word_i210 =_ "Read INVM Word 0x%02x = %x\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:240 [igb]igb_write_nvm_srwr =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:142 [igb]igb_acquire_swfw_sync_i210 =_ "Driver can't access resource, SW_FW_SYNC timeout.\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:76 [igb]igb_get_hw_semaphore_i210 =_ "Driver can't access the NVM\012"
drivers/net/ethernet/intel/igb/e1000_i210.c:56 [igb]igb_get_hw_semaphore_i210 =_ "Driver can't access device - SMBI bit is set.\012"
drivers/net/ethernet/intel/igb/igb_ptp.c:726 [igb]igb_ptp_overflow_check =_ "igb overflow check at %lld.%09lu\012"
drivers/ata/libata-core.c:2769 [libata]ata_dev_configure =_ "ata%u.%02u: %s: EXIT, err\012"
drivers/ata/libata-core.c:2562 [libata]ata_dev_configure =_ "ata%u.%02u: %s: cfg 49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\012"
drivers/ata/libata-core.c:2512 [libata]ata_dev_configure =_ "ata%u.%02u: %s: ENTER\012"
drivers/ata/libata-core.c:2371 [libata]ata_dev_config_trusted =_ "ata%u.%02u: Trusted Computing capability qword not valid!\012"
drivers/ata/libata-core.c:2289 [libata]ata_dev_config_sense_reporting =_ "ata%u.%02u: failed to enable Sense Data Reporting, Emask 0x%x\012"
drivers/ata/libata-core.c:2139 [libata]ata_dev_config_ncq_send_recv =_ "ata%u.%02u: disabling queued TRIM support\012"
drivers/ata/libata-core.c:1905 [libata]ata_dev_read_id =_ "ata%u.%02u: host indicates ignore ATA devices, ignored\012"
drivers/ata/libata-core.c:1882 [libata]ata_dev_read_id =_ "ata%u.%02u: dumping IDENTIFY data, class=%d may_fallback=%d tried_spinup=%d\012"
drivers/ata/libata-core.c:1871 [libata]ata_dev_read_id =_ "ata%u.%02u: both IDENTIFYs aborted, assuming NODEV\012"
drivers/ata/libata-core.c:1839 [libata]ata_dev_read_id =_ "ata%u.%02u: NODEV after polling detection\012"
drivers/ata/libata-core.c:1798 [libata]ata_dev_read_id =_ "ata%u.%02u: %s: ENTER\012"
drivers/ata/libata-eh.c:2746 [libata]ata_eh_reset =_ "ata%u.%02u: link status unknown, clearing UNKNOWN to NONE\012"
drivers/ata/libata-eh.c:2741 [libata]ata_eh_reset =_ "ata%u.%02u: link offline, clearing class %d to NONE\012"
drivers/ata/libata-eh.c:2735 [libata]ata_eh_reset =_ "ata%u.%02u: link online but device misclassified\012"
drivers/ata/libata-eh.c:2563 [libata]ata_eh_reset =_ "ata%u: port disabled--ignoring\012"
drivers/ata/libata-eh.c:2563 [libata]ata_eh_reset =_ "ata%u.%02u: port disabled--ignoring\012"
drivers/ata/libata-sff.c:2128 [libata]ata_sff_drain_fifo =_ "ata%u: drained %d bytes to clear DRQ\012"
drivers/ata/libata-sff.c:1284 [libata]ata_sff_flush_pio_task =_ "ata%u: %s: EXIT\012"
include/linux/libata.h:2073 [libata]ata_wait_idle =_ "ata%u: abnormal Status 0x%X\012"
drivers/ata/libata-acpi.c:784 [libata]ata_acpi_push_id =_ "ata%u.%02u: %s: ix = %d, port#: %d\012"
drivers/ata/libata-acpi.c:678 [libata]ata_acpi_run_tf =_ "ata%u.%02u: ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x(%s) succeeded\012"
drivers/ata/libata-acpi.c:468 [libata]ata_dev_get_GTF =_ "ata%u.%02u: %s: returning gtf=%p, gtf_count=%d\012"
drivers/ata/libata-acpi.c:441 [libata]ata_dev_get_GTF =_ "ata%u.%02u: %s: Run _GTF: length or ptr is NULL (0x%llx, 0x%p)\012"
drivers/ata/libata-acpi.c:422 [libata]ata_dev_get_GTF =_ "ata%u.%02u: %s: ENTER: port#: %d\012"
drivers/hid/intel-ish-hid/ipc/pci-ish.c:386 [intel_ish_ipc]ish_resume =_ "set power state to D0 for ehl\012"
drivers/hid/intel-ish-hid/ipc/pci-ish.c:158 [intel_ish_ipc]enable_pme_wake =_ "ish ipc driver pme wake enabled\012"
drivers/hid/intel-ish-hid/ishtp/hbm.c:641 [intel_ishtp]ishtp_hbm_dispatch =_ "Requesting to use DMA\012"
drivers/hid/intel-ish-hid/ishtp/hbm.c:105 [intel_ishtp]ishtp_hbm_start_wait =_ "Woke up from waiting for ishtp start. hbm_state=%08X\012"
drivers/hid/intel-ish-hid/ishtp/hbm.c:99 [intel_ishtp]ishtp_hbm_start_wait =_ "Going to wait for ishtp start. hbm_state=%08X\012"
drivers/acpi/acpi_video.c:1882 [video]acpi_video_should_register_backlight =_ "not in _DOD list, ignore\012"
drivers/acpi/acpi_video.c:1717 [video]acpi_video_device_notify =_ "Unsupported event [0x%x]\012"
drivers/acpi/acpi_video.c:1645 [video]acpi_video_bus_notify =_ "Unsupported event [0x%x]\012"
drivers/acpi/acpi_video.c:1400 [video]acpi_video_device_enumerate =_ "_DOD element[%d] = %d\012"
drivers/acpi/acpi_video.c:1376 [video]acpi_video_device_enumerate =_ "Found %d video heads in _DOD\012"
drivers/acpi/acpi_video.c:1309 [video]acpi_video_device_bind =_ "%s: %d\012"
drivers/acpi/acpi_video.c:1023 [video]acpi_video_init_brightness =_ "found %d brightness levels\012"
drivers/acpi/acpi_video.c:863 [video]acpi_video_get_levels =_ "Could not query available LCD brightness level\012"
arch/x86/pci/irq.c:1325 [irq]pcibios_fixup_irqs =_ "ignoring bogus IRQ %d\012"
arch/x86/pci/irq.c:1272 [irq]pcibios_lookup_irq =_ "can't route interrupt\012"
arch/x86/pci/irq.c:1242 [irq]pcibios_lookup_irq =_ "PCI INT %c -> newirq %d"
arch/x86/pci/irq.c:1199 [irq]pcibios_lookup_irq =_ "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x"
arch/x86/pci/irq.c:1196 [irq]pcibios_lookup_irq =_ "PCI INT %c not routed\012"
arch/x86/pci/irq.c:1189 [irq]pcibios_lookup_irq =_ "PCI INT %c not found in routing table\012"
arch/x86/pci/irq.c:1175 [irq]pcibios_lookup_irq =_ "no interrupt pin\012"
arch/x86/pci/fixup.c:73 [fixup]pci_fixup_latency =_ "Setting max latency to 32\012"
arch/x86/pci/fixup.c:28 [fixup]pci_fixup_i450nx =_ "i450NX PXB %d: %02x/%02x/%02x\012"
arch/x86/pci/i386.c:298 [i386]pcibios_allocate_dev_resources =_ "disabling ROM %pR\012"
arch/x86/pci/i386.c:275 [i386]pcibios_allocate_dev_resources =_ "BAR %d: reserving %pr (d=%d, p=%d)\012"
net/sysctl_net.c:139 [sysctl_net]ensure_safe_net_sysctl =_ "    Not writable by anyone\012"
net/sysctl_net.c:134 [sysctl_net]ensure_safe_net_sysctl =_ "  procname=%s mode=%o proc_handler=%ps data=%p\012"
net/sysctl_net.c:129 [sysctl_net]ensure_safe_net_sysctl =_ "Registering net sysctl (net %p): %s\012"
include/net/udplite.h:50 [ip6_checksum]udplite_checksum_init =_ "UDPLite: bad csum coverage %d/%d\012"
include/net/udplite.h:38 [ip6_checksum]udplite_checksum_init =_ "UDPLite: zeroed checksum field\012"
net/ipv6/ip6_output.c:1332 [ipv6]ip6_dst_lookup_tunnel =_ "circular route to %pI6\012"
net/ipv6/ip6_output.c:1328 [ipv6]ip6_dst_lookup_tunnel =_ "no route to %pI6\012"
net/ipv6/addrconf.c:4652 [ipv6]addrconf_verify_rtnl =_ "now = %lu, schedule = %lu, rounded schedule = %lu => %lu\012"
net/ipv6/addrconf.c:3980 [ipv6]addrconf_rs_timer =_ "%s: no IPv6 routers present\012"
net/ipv6/addrconf.c:3626 [ipv6]addrconf_notify =_ "ADDRCONF(NETDEV_UP): %s: link is not ready\012"
net/ipv6/addrconf.c:3458 [ipv6]addrconf_gre_config =_ "%s: add_dev failed\012"
net/ipv6/addrconf.c:3433 [ipv6]addrconf_sit_config =_ "%s: add_dev failed\012"
net/ipv6/addrconf.c:3212 [ipv6]init_loopback =_ "%s: add_dev failed\012"
net/ipv6/addrconf.c:2842 [ipv6]addrconf_prefix_rcv =_ "IPv6 addrconf: prefix with wrong length %d\012"
net/ipv6/addrconf.c:2751 [ipv6]addrconf_prefix_rcv =_ "addrconf: device %s not configured\012"
net/ipv6/addrconf.c:2727 [ipv6]addrconf_prefix_rcv =_ "addrconf: prefix option too short\012"
net/ipv6/addrconf.c:1700 [ipv6]__ipv6_dev_get_saddr =_ "ADDRCONF: unspecified / multicast address assigned as unicast address on %s"
net/ipv6/addrconf.c:1059 [ipv6]ipv6_add_addr_hash =_ "ipv6_add_addr: already assigned\012"
net/ipv6/addrconf.c:419 [ipv6]ipv6_add_dev =_ "%s: cannot create /proc/net/dev_snmp6/%s\012"
net/ipv6/addrconf.c:410 [ipv6]ipv6_add_dev =_ "%s: cannot allocate memory for statistics\012"
net/ipv6/route.c:4192 [ipv6]rt6_do_redirect =_ "rt6_redirect: source isn't a valid nexthop for redirect target\012"
net/ipv6/route.c:4185 [ipv6]rt6_do_redirect =_ "rt6_redirect: invalid link-layer address length\012"
net/ipv6/route.c:4176 [ipv6]rt6_do_redirect =_ "rt6_redirect: invalid ND options\012"
net/ipv6/route.c:4160 [ipv6]rt6_do_redirect =_ "rt6_do_redirect: target address is not link-local unicast\012"
net/ipv6/route.c:4151 [ipv6]rt6_do_redirect =_ "rt6_do_redirect: destination address is multicast\012"
net/ipv6/route.c:4144 [ipv6]rt6_do_redirect =_ "rt6_do_redirect: packet too short\012"
net/ipv6/ip6_fib.c:2196 [ipv6]fib6_clean_node =_ "%s: del failed: rt=%p@%p err=%d\012"
net/ipv6/ndisc.c:738 [ipv6]ndisc_solicit =_ "%s: trying to ucast probe in NUD_INVALID: %pI6\012"
net/ipv6/udp.c:1596 [ipv6]udpv6_sendmsg =_ "udp cork app bug 2\012"
net/ipv6/udp.c:1039 [ipv6]__udp6_lib_rcv =_ "UDP%sv6: short packet: From [%pI6c]:%u %d/%d to [%pI6c]:%u\012"
net/ipv6/udp.c:833 [ipv6]udp6_csum_zero_error =_ "IPv6: udp checksum is 0 for [%pI6c]:%u->[%pI6c]:%u\012"
net/ipv6/udp.c:753 [ipv6]udpv6_queue_rcv_one_skb =_ "UDPLITE6: coverage %d too small, need min %d\012"
net/ipv6/udp.c:748 [ipv6]udpv6_queue_rcv_one_skb =_ "UDPLITE6: partial coverage %d while full coverage %d requested\012"
net/ipv6/icmp.c:994 [ipv6]icmpv6_rcv =_ "icmpv6: msg of unknown type [%pI6c > %pI6c]\012"
net/ipv6/icmp.c:912 [ipv6]icmpv6_rcv =_ "ICMPv6 checksum failed [%pI6c > %pI6c]\012"
net/ipv6/icmp.c:537 [ipv6]icmp6_send =_ "icmp6_send: no reply to icmp error [%pI6c > %pI6c]\012"
net/ipv6/icmp.c:528 [ipv6]icmp6_send =_ "icmp6_send: addr_any/mcast source [%pI6c > %pI6c]\012"
net/ipv6/icmp.c:375 [ipv6]icmpv6_route_lookup =_ "icmp6_send: acast source\012"
net/ipv6/reassembly.c:312 [ipv6]ip6_frag_reasm =_ "ip6_frag_reasm: no memory for reassembly\012"
net/ipv6/reassembly.c:309 [ipv6]ip6_frag_reasm =_ "ip6_frag_reasm: payload len = %d\012"
net/ipv6/ping.c:62 [ipv6]ping_v6_sendmsg =_ "ping_v6_sendmsg(sk=%p,sk->num=%u)\012"
net/ipv6/exthdrs.c:999 [ipv6]ipv6_hop_jumbo =_ "ipv6_hop_jumbo: wrong jumbo opt length/alignment %d\012"
net/ipv6/exthdrs.c:929 [ipv6]ipv6_hop_ra =_ "ipv6_hop_ra: wrong RA length %d\012"
net/ipv6/exthdrs.c:253 [ipv6]ipv6_dest_hao =_ "hao is not an unicast addr: %pI6\012"
net/ipv6/exthdrs.c:247 [ipv6]ipv6_dest_hao =_ "hao invalid option length = %d\012"
net/ipv6/exthdrs.c:238 [ipv6]ipv6_dest_hao =_ "hao duplicated\012"
net/ipv6/datagram.c:1030 [ipv6]ip6_datagram_send_ctl =_ "invalid cmsg type: %d\012"
net/ipv6/netfilter.c:53 [ipv6]ip6_route_me_harder =_ "ip6_route_me_harder: No more route\012"
net/ipv6/seg6_local.c:518 [ipv6]__seg6_end_dt_vrf_build =_ "seg6local: SRv6 End.DT* creation error=%d\012"
net/ipv6/seg6_hmac.c:150 [ipv6]__do_hmac =_ "sr-ipv6: crypto_shash_digest failed: err %d\012"
net/ipv6/seg6_hmac.c:141 [ipv6]__do_hmac =_ "sr-ipv6: crypto_shash_setkey failed: err %d\012"
net/ipv6/seg6_hmac.c:134 [ipv6]__do_hmac =_ "sr-ipv6: __do_hmac: digest size too big (%d / %d)\012"
net/xfrm/xfrm_output.c:113 [xfrm_output]mip6_rthdr_offset =_ "mip6: hao exists already, override\012"
net/ipv4/tcp_cubic.c:416 [tcp_cubic]hystart_update =_ "hystart_ack_train (%u > %u) delay_min %u (+ ack_delay %u) cwnd %u\012"
net/ipv4/sysctl_net_ipv4.c:290 [sysctl_net_ipv4]sscanf_key =_ "proc TFO key set 0x%x-%x-%x-%x <- 0x%s: %u\012"
net/ipv4/ping.c:996 [ping]ping_rcv =_ "no socket, dropping\012"
net/ipv4/ping.c:989 [ping]ping_rcv =_ "rcv on socket %p\012"
net/ipv4/ping.c:979 [ping]ping_rcv =_ "ping_rcv(skb=%p,id=%04x,seq=%04x)\012"
net/ipv4/ping.c:958 [ping]ping_queue_rcv_skb =_ "ping_queue_rcv_skb -> failed\012"
net/ipv4/ping.c:954 [ping]ping_queue_rcv_skb =_ "ping_queue_rcv_skb(sk=%p,sk->num=%d,skb=%p)\012"
net/ipv4/ping.c:947 [ping]ping_recvmsg =_ "ping_recvmsg -> %d\012"
net/ipv4/ping.c:870 [ping]ping_recvmsg =_ "ping_recvmsg(sk=%p,sk->num=%u)\012"
net/ipv4/ping.c:718 [ping]ping_v4_sendmsg =_ "ping_v4_sendmsg(sk=%p,sk->num=%u)\012"
net/ipv4/ping.c:524 [ping]ping_err =_ "err on socket %p\012"
net/ipv4/ping.c:521 [ping]ping_err =_ "no socket, dropping\012"
net/ipv4/ping.c:515 [ping]ping_err =_ "ping_err(proto=0x%x,type=%d,code=%d,id=%04x,seq=%04x)\012"
net/ipv4/ping.c:462 [ping]ping_bind =_ "ping_v4_bind -> %d\012"
net/ipv4/ping.c:436 [ping]ping_bind =_ "after bind(): num = %hu, dif = %d\012"
net/ipv4/ping.c:347 [ping]ping_check_bind_addr =_ "ping_check_bind_addr(sk=%p,addr=%pI6c,port=%d)\012"
net/ipv4/ping.c:319 [ping]ping_check_bind_addr =_ "ping_check_bind_addr(sk=%p,addr=%pI4,port=%d)\012"
net/ipv4/ping.c:295 [ping]ping_close =_ "isk->refcnt = %d\012"
net/ipv4/ping.c:293 [ping]ping_close =_ "ping_close(sk=%p,sk->num=%u)\012"
net/ipv4/ping.c:215 [ping]ping_lookup =_ "found: %p: num=%d, daddr=%pI6c, dif=%d\012"
net/ipv4/ping.c:204 [ping]ping_lookup =_ "found: %p: num=%d, daddr=%pI4, dif=%d\012"
net/ipv4/ping.c:198 [ping]ping_lookup =_ "iterate\012"
net/ipv4/ping.c:186 [ping]ping_lookup =_ "try to find: num = %d, daddr = %pI6c, dif = %d\012"
net/ipv4/ping.c:180 [ping]ping_lookup =_ "try to find: num = %d, daddr = %pI4, dif = %d\012"
net/ipv4/ping.c:155 [ping]ping_unhash =_ "ping_unhash(isk=%p,isk->num=%u)\012"
net/ipv4/ping.c:145 [ping]ping_hash =_ "ping_hash(sk->port=%u)\012"
net/ipv4/ping.c:129 [ping]ping_get_port =_ "was not hashed\012"
net/ipv4/ping.c:126 [ping]ping_get_port =_ "found port/ident = %d\012"
net/ipv4/ping.c:66 [ping]ping_hashfn =_ "hash(%u) = %u\012"
net/ipv4/fib_trie.c:2429 [fib_trie]fib_trie_get_next =_ "get_next iter={node=%p index=%d depth=%d}\012"
net/ipv4/fib_trie.c:2080 [fib_trie]fib_table_flush =_ "trie_flush found=%d\012"
net/ipv4/fib_trie.c:1707 [fib_trie]fib_table_delete =_ "Deleting %08x/%d tos=%d t=%p\012"
net/ipv4/fib_trie.c:1210 [fib_trie]fib_table_insert =_ "Insert table=%u %08x/%d\012"
net/ipv4/fib_trie.c:855 [fib_trie]resize =_ "In tnode_resize %p inflate_threshold=%d threshold=%d\012"
net/ipv4/fib_trie.c:637 [fib_trie]halve =_ "In halve\012"
net/ipv4/fib_trie.c:542 [fib_trie]inflate =_ "In inflate\012"
net/ipv4/fib_trie.c:388 [fib_trie]tnode_new =_ "AT %p s=%zu %zu\012"
net/ipv4/devinet.c:1561 [devinet]inetdev_event =_ "%s: bug\012"
net/ipv4/icmp.c:912 [icmp]icmp_unreach =_ "%pI4: Source Route Failed\012"
net/ipv4/icmp.c:898 [icmp]icmp_unreach =_ "%pI4: fragmentation needed and DF set\012"
net/ipv4/arp.c:378 [arp]arp_solicit =_ "trying to ucast probe in NUD_INVALID\012"
net/ipv4/udp.c:2526 [udp]__udp4_lib_rcv =_ "UDP%s: bad checksum. From %pI4:%u to %pI4:%u ulen %d\012"
net/ipv4/udp.c:2513 [udp]__udp4_lib_rcv =_ "UDP%s: short packet: From %pI4:%u %d/%d to %pI4:%u\012"
net/ipv4/udp.c:2224 [udp]udp_queue_rcv_one_skb =_ "UDPLite: coverage %d too small, need min %d\012"
net/ipv4/udp.c:2213 [udp]udp_queue_rcv_one_skb =_ "UDPLite: partial coverage %d while full coverage %d requested\012"
net/ipv4/udp.c:1373 [udp]udp_sendpage =_ "cork failed\012"
net/ipv4/udp.c:1289 [udp]udp_sendmsg =_ "socket already corked\012"
include/net/udplite.h:50 [udp]udplite_checksum_init =_ "UDPLite: bad csum coverage %d/%d\012"
include/net/udplite.h:38 [udp]udplite_checksum_init =_ "UDPLite: zeroed checksum field\012"
include/net/inet_connection_sock.h:222 [tcp_recovery]inet_csk_reset_xmit_timer =_ "reset_xmit_timer: sk=%p %d when=0x%lx, caller=%p\012"
net/ipv4/tcp_rate.c:169 [tcp_rate]tcp_rate_gen =_ "tcp rate: %ld %d %u %u %u\012"
net/ipv4/tcp_cong.c:90 [tcp_cong]tcp_register_congestion_control =_ "%s registered\012"
include/net/inet_connection_sock.h:222 [tcp_ipv4]inet_csk_reset_xmit_timer =_ "reset_xmit_timer: sk=%p %d when=0x%lx, caller=%p\012"
net/ipv4/tcp_timer.c:525 [tcp_timer]tcp_retransmit_timer =_ "Peer %pI6:%u/%u unexpectedly shrunk window %u:%u (repaired)\012"
net/ipv4/tcp_timer.c:517 [tcp_timer]tcp_retransmit_timer =_ "Peer %pI4:%u/%u unexpectedly shrunk window %u:%u (repaired)\012"
include/net/inet_connection_sock.h:222 [tcp_timer]inet_csk_reset_xmit_timer =_ "reset_xmit_timer: sk=%p %d when=0x%lx, caller=%p\012"
net/ipv4/tcp_output.c:3295 [tcp_output]tcp_retransmit_skb =_ "retrans_out leaked\012"
include/net/inet_connection_sock.h:222 [tcp_output]inet_csk_reset_xmit_timer =_ "reset_xmit_timer: sk=%p %d when=0x%lx, caller=%p\012"
net/ipv4/tcp_input.c:6751 [tcp_input]pr_drop_req =_ "drop open request from %pI6/%u\012"
net/ipv4/tcp_input.c:6747 [tcp_input]pr_drop_req =_ "drop open request from %pI4/%u\012"
net/ipv4/tcp_input.c:3500 [tcp_input]tcp_clean_rtx_queue =_ "Leak r=%u %d\012"
net/ipv4/tcp_input.c:3495 [tcp_input]tcp_clean_rtx_queue =_ "Leak s=%u %d\012"
net/ipv4/tcp_input.c:3490 [tcp_input]tcp_clean_rtx_queue =_ "Leak l=%u %d\012"
include/net/inet_connection_sock.h:222 [tcp_input]inet_csk_reset_xmit_timer =_ "reset_xmit_timer: sk=%p %d when=0x%lx, caller=%p\012"
net/ipv4/tcp.c:2453 [tcp]tcp_recvmsg_locked =_ "TCP(%s:%d): Application bug, race in MSG_PEEK\012"
net/ipv4/ip_output.c:234 [ip_output]ip_finish_output2 =_ "%s: No header cache and no neighbour!\012"
net/ipv4/ip_fragment.c:465 [ip_fragment]ip_frag_reasm =_ "queue_glue: no memory for gluing queue %p\012"
net/ipv4/route.c:2952 [route]ip_route_output_tunnel =_ "circular route to %pI4\012"
net/ipv4/route.c:2948 [route]ip_route_output_tunnel =_ "no route to %pI4\012"
net/ipv4/route.c:1277 [route]ip_rt_bug =_ "%s: %pI4 -> %pI4, %s\012"
net/netfilter/xt_tcpudp.c:143 [xt_tcpudp]udp_mt =_ "Dropping evil UDP tinygram.\012"
net/netfilter/xt_tcpudp.c:91 [xt_tcpudp]tcp_mt =_ "Dropping evil TCP offset=0 tinygram.\012"
net/netfilter/xt_tcpudp.c:80 [xt_tcpudp]tcp_mt =_ "Dropping evil TCP offset=1 frag.\012"
net/netfilter/xt_tcpudp.c:44 [xt_tcpudp]tcp_find_option =_ "finding option\012"
net/netfilter/x_tables.c:1483 [x_tables]xt_register_table =_ "table->private->number = %u\012"
net/netfilter/x_tables.c:1405 [x_tables]xt_replace_table =_ "num_counters != table->private->number (%u/%u)\012"
net/netfilter/nf_sockopt.c:37 [netfilter]nf_register_sockopt =_ "nf_sock overlap: %u-%u/%u-%u v %u-%u/%u-%u\012"
net/sched/sch_api.c:400 [sch_api]__detect_linklayer =_ "TC linklayer: Detected ATM, low(%d)=high(%d)=%u\012"
net/sched/sch_api.c:394 [sch_api]__detect_linklayer =_ "TC linklayer: Giving up ATM detection\012"
net/core/dev.c:11096 [dev]unregister_netdevice_many =_ "unregister_netdevice: device %s/%p never was registered\012"
net/core/dev.c:10047 [dev]__netdev_update_features =_ "Features changed: %pNF -> %pNF\012"
net/core/dev.c:10016 [dev]netdev_fix_features =_ "Dropping TLS RX HW offload feature since no RXCSUM feature.\012"
net/core/dev.c:10010 [dev]netdev_fix_features =_ "Dropping TLS TX HW offload feature since no CSUM feature.\012"
net/core/dev.c:9999 [dev]netdev_fix_features =_ "Dropping HW-GRO feature since RX-FCS is requested.\012"
net/core/dev.c:9994 [dev]netdev_fix_features =_ "Dropping LRO feature since RX-FCS is requested.\012"
net/core/dev.c:9986 [dev]netdev_fix_features =_ "Dropping NETIF_F_GRO_HW since no RXCSUM feature.\012"
net/core/dev.c:9974 [dev]netdev_fix_features =_ "Dropping partially supported GSO features since no GSO partial.\012"
net/core/dev.c:9967 [dev]netdev_fix_features =_ "Dropping NETIF_F_GSO since no SG feature.\012"
net/core/dev.c:9953 [dev]netdev_fix_features =_ "Dropping TSO6 features since no CSUM feature.\012"
net/core/dev.c:9946 [dev]netdev_fix_features =_ "Dropping TSO features since no CSUM feature.\012"
net/core/dev.c:9940 [dev]netdev_fix_features =_ "Dropping TSO features since no SG feature.\012"
net/core/dev.c:9914 [dev]netdev_sync_lower_features =_ "Disabling feature %pNF on lower dev %s.\012"
net/core/dev.c:9895 [dev]netdev_sync_upper_features =_ "Dropping feature %pNF, upper dev %s has it off.\012"
net/core/dev.c:8091 [dev]__netdev_adjacent_dev_remove =_ "adjacency: dev_put for %s, because link removed from %s to %s\012"
net/core/dev.c:8077 [dev]__netdev_adjacent_dev_remove =_ "adjacency: %s to %s ref_nr - %d = %d\012"
net/core/dev.c:8064 [dev]__netdev_adjacent_dev_remove =_ "Remove adjacency: dev %s adj_dev %s ref_nr %d\012"
net/core/dev.c:8024 [dev]__netdev_adjacent_dev_insert =_ "Insert adjacency: dev %s adj_dev %s adj->ref_nr %d; dev_hold on %s\012"
net/core/dev.c:8007 [dev]__netdev_adjacent_dev_insert =_ "Insert adjacency: dev %s adj_dev %s adj->ref_nr %d\012"
net/core/sock.c:1972 [sock]__sk_destruct =_ "%s: optmem leakage (%d bytes) detected\012"
drivers/nvmem/core.c:856 [nvmem_core]nvmem_register =_ "Registering nvmem device %s\012"
drivers/thunderbolt/nhi.c:1324 [thunderbolt]nhi_probe =_ "NHI initialized, starting thunderbolt\012"
drivers/thunderbolt/nhi.c:1282 [thunderbolt]nhi_probe =_ "total paths: %d\012"
drivers/thunderbolt/nhi.c:1126 [thunderbolt]nhi_shutdown =_ "shutdown\012"
drivers/thunderbolt/nhi.c:829 [thunderbolt]tb_ring_free =_ "freeing %s %d\012"
drivers/thunderbolt/nhi.c:760 [thunderbolt]tb_ring_stop =_ "stopping %s %d\012"
drivers/thunderbolt/nhi.c:726 [thunderbolt]tb_ring_start =_ "enabling E2E for %s %d\012"
drivers/thunderbolt/nhi.c:722 [thunderbolt]tb_ring_start =_ "enabling E2E for %s %d with TX HopID %d\012"
drivers/thunderbolt/nhi.c:685 [thunderbolt]tb_ring_start =_ "starting %s %d\012"
drivers/thunderbolt/nhi.c:576 [thunderbolt]tb_ring_alloc =_ "allocating %s ring %d of size %d\012"
drivers/thunderbolt/nhi.c:505 [thunderbolt]nhi_alloc_hop =_ "quirking E2E TX HopID %u -> %u\012"
drivers/thunderbolt/nhi.c:134 [thunderbolt]ring_interrupt_active =_ "%s interrupt at register %#x bit %d (%#x -> %#x)\012"
drivers/thunderbolt/ctl.c:758 [thunderbolt]tb_cfg_ack_plug =_ "acking hot %splug event on %llx:%x\012"
drivers/thunderbolt/ctl.c:734 [thunderbolt]tb_ctl_stop =_ "control channel stopped\012"
drivers/thunderbolt/ctl.c:704 [thunderbolt]tb_ctl_start =_ "control channel starting...\012"
drivers/thunderbolt/ctl.c:661 [thunderbolt]tb_ctl_alloc =_ "control channel created\012"
drivers/thunderbolt/ctl.c:286 [thunderbolt]tb_cfg_print_error =_ "%llx:%x: invalid config space or offset\012"
drivers/thunderbolt/tb.c:1738 [thunderbolt]tb_probe =_ "using software connection manager\012"
drivers/thunderbolt/tb.c:1708 [thunderbolt]tb_apple_add_links =_ "created link from %s\012"
drivers/thunderbolt/tb.c:1533 [thunderbolt]tb_resume_noirq =_ "resume finished\012"
drivers/thunderbolt/tb.c:1528 [thunderbolt]tb_resume_noirq =_ "tunnels restarted, sleeping for 100ms\012"
drivers/thunderbolt/tb.c:1489 [thunderbolt]tb_resume_noirq =_ "resuming...\012"
drivers/thunderbolt/tb.c:1451 [thunderbolt]tb_suspend_noirq =_ "suspend finished\012"
drivers/thunderbolt/tb.c:1447 [thunderbolt]tb_suspend_noirq =_ "suspending...\012"
drivers/thunderbolt/tb.c:1299 [thunderbolt]tb_handle_hotplug =_ "%llx:%x: hotplug: no switch found\012"
drivers/thunderbolt/tb.c:1296 [thunderbolt]tb_handle_hotplug =_ "%llx:%x: hotplug: scanning\012"
drivers/thunderbolt/tb.c:1293 [thunderbolt]tb_handle_hotplug =_ "%llx:%x: got plug event for connected port, ignoring\012"
drivers/thunderbolt/tb.c:1289 [thunderbolt]tb_handle_hotplug =_ "%llx:%x: got unplug event for disconnected port, ignoring\012"
drivers/thunderbolt/tb.c:1272 [thunderbolt]tb_handle_hotplug =_ "%llx:%x: xdomain unplugged\012"
drivers/thunderbolt/tb.c:1256 [thunderbolt]tb_handle_hotplug =_ "%llx:%x: switch unplugged\012"
drivers/thunderbolt/tb.c:1245 [thunderbolt]tb_handle_hotplug =_ "hotplug event for upstream port %llx:%x (unplug: %d)\012"
drivers/thunderbolt/tb.c:1049 [thunderbolt]tb_dp_resource_available =_ "%llx:%x: DP %s resource available\012"
drivers/thunderbolt/tb.c:1020 [thunderbolt]tb_dp_resource_unavailable =_ "%llx:%x: DP OUT resource unavailable\012"
drivers/thunderbolt/tb.c:1016 [thunderbolt]tb_dp_resource_unavailable =_ "%llx:%x: DP IN resource unavailable\012"
drivers/thunderbolt/tb.c:984 [thunderbolt]tb_tunnel_dp =_ "%llx:%x: could not allocate DP tunnel\012"
drivers/thunderbolt/tb.c:978 [thunderbolt]tb_tunnel_dp =_ "available bandwidth for new DP tunnel %u/%u Mb/s\012"
drivers/thunderbolt/tb.c:962 [thunderbolt]tb_tunnel_dp =_ "%llx:%x: no resource available for DP IN, not tunneling\012"
drivers/thunderbolt/tb.c:928 [thunderbolt]tb_tunnel_dp =_ "no suitable DP IN adapter available, not tunneling\012"
drivers/thunderbolt/tb.c:918 [thunderbolt]tb_tunnel_dp =_ "%llx:%x: DP IN available\012"
drivers/thunderbolt/tb.c:914 [thunderbolt]tb_tunnel_dp =_ "%llx:%x: in use\012"
drivers/thunderbolt/tb.c:905 [thunderbolt]tb_tunnel_dp =_ "looking for DP IN <-> DP OUT pairs:\012"
drivers/thunderbolt/tb.c:897 [thunderbolt]tb_tunnel_dp =_ "DP tunneling disabled, not creating tunnel\012"
drivers/thunderbolt/tb.c:869 [thunderbolt]tb_find_dp_out =_ "%llx:%x: DP OUT available\012"
drivers/thunderbolt/tb.c:865 [thunderbolt]tb_find_dp_out =_ "%llx:%x: in use\012"
drivers/thunderbolt/tb.c:632 [thunderbolt]tb_scan_port =_ "%llx:%x: port already has a remote\012"
drivers/thunderbolt/tb.c:616 [thunderbolt]tb_scan_port =_ "%llx:%x: DP adapter HPD set, queuing hotplug\012"
drivers/thunderbolt/tb.c:527 [thunderbolt]tb_tunnel_usb3 =_ "%llx:%x: available bandwidth for new USB3 tunnel %d/%d Mb/s\012"
drivers/thunderbolt/tb.c:485 [thunderbolt]tb_tunnel_usb3 =_ "USB3 tunneling disabled, not creating tunnel\012"
drivers/thunderbolt/tb.c:470 [thunderbolt]tb_reclaim_usb3_bandwidth =_ "available bandwidth for USB3 %d/%d Mb/s\012"
drivers/thunderbolt/tb.c:457 [thunderbolt]tb_reclaim_usb3_bandwidth =_ "reclaiming unused bandwidth for USB3\012"
drivers/thunderbolt/tb.c:389 [thunderbolt]tb_available_bandwidth =_ "%llx:%x: link total bandwidth %d Mb/s\012"
drivers/thunderbolt/tb.c:352 [thunderbolt]tb_available_bandwidth =_ "%llx:%x: calculating available bandwidth\012"
drivers/thunderbolt/tb.c:118 [thunderbolt]tb_discover_dp_resource =_ "%llx:%x: DP %s resource available discovered\012"
drivers/thunderbolt/tb.c:102 [thunderbolt]tb_remove_dp_resources =_ "%llx:%x: DP OUT resource unavailable\012"
drivers/thunderbolt/tb.c:85 [thunderbolt]tb_add_dp_resources =_ "%llx:%x: DP IN resource available\012"
drivers/thunderbolt/switch.c:3060 [thunderbolt]tb_switch_suspend =_ "%llx: suspending switch\012"
drivers/thunderbolt/switch.c:2961 [thunderbolt]tb_switch_resume =_ "%llx: resuming switch\012"
drivers/thunderbolt/switch.c:2930 [thunderbolt]tb_switch_set_wake =_ "%llx: disabling wakeup\012"
drivers/thunderbolt/switch.c:2928 [thunderbolt]tb_switch_set_wake =_ "%llx: enabling wakeup: %#x\012"
drivers/thunderbolt/switch.c:2775 [thunderbolt]tb_switch_add =_ "%llx:%x: disabled by eeprom\012"
drivers/thunderbolt/switch.c:2765 [thunderbolt]tb_switch_add =_ "%llx: uid: %#llx\012"
drivers/thunderbolt/switch.c:2624 [thunderbolt]tb_switch_lane_bonding_disable =_ "%llx: lane bonding disabled\012"
drivers/thunderbolt/switch.c:2585 [thunderbolt]tb_switch_lane_bonding_enable =_ "%llx: lane bonding enabled\012"
drivers/thunderbolt/switch.c:2477 [thunderbolt]tb_switch_default_link_ports =_ "%llx: linked ports %d <-> %d\012"
drivers/thunderbolt/switch.c:2271 [thunderbolt]tb_switch_configure =_ "%s Switch at %#llx (depth: %d, up port: %d)\012"
drivers/thunderbolt/switch.c:2149 [thunderbolt]tb_switch_alloc =_ "current switch config:\012"
drivers/thunderbolt/switch.c:1440 [thunderbolt]tb_switch_reset =_ "%llx: resetting switch\012"
drivers/thunderbolt/switch.c:1423 [thunderbolt]tb_dump_switch =_ "   unknown1: %#x unknown4: %#x\012"
drivers/thunderbolt/switch.c:1418 [thunderbolt]tb_dump_switch =_ "   Upstream Port Number: %d Depth: %d Route String: %#llx Enabled: %d, PlugEventsDelay: %dms\012"
drivers/thunderbolt/switch.c:1417 [thunderbolt]tb_dump_switch =_ "  Config:\012"
drivers/thunderbolt/switch.c:1416 [thunderbolt]tb_dump_switch =_ "  Max Port Number: %d\012"
drivers/thunderbolt/switch.c:1413 [thunderbolt]tb_dump_switch =_ " %s Switch: %x:%x (Revision: %d, TB Version: %d)\012"
drivers/thunderbolt/switch.c:1125 [thunderbolt]tb_port_do_update_credits =_ "%llx:%x: total credits changed %u -> %u\012"
drivers/thunderbolt/switch.c:736 [thunderbolt]tb_init_port =_ " Port %d: not implemented\012"
drivers/thunderbolt/switch.c:648 [thunderbolt]tb_port_clear_counter =_ "%llx:%x: clearing counter %d\012"
drivers/thunderbolt/switch.c:628 [thunderbolt]tb_port_add_nfc_credits =_ "%llx:%x: adding %d NFC credits to %lu"
drivers/thunderbolt/switch.c:591 [thunderbolt]tb_wait_for_port =_ "%llx:%x: is connected, link is not up (state: %d), retrying...\012"
drivers/thunderbolt/switch.c:583 [thunderbolt]tb_wait_for_port =_ "%llx:%x: is connected, link is up (state: 2)\012"
drivers/thunderbolt/switch.c:579 [thunderbolt]tb_wait_for_port =_ "%llx:%x: is unplugged (state: 7)\012"
drivers/thunderbolt/switch.c:574 [thunderbolt]tb_wait_for_port =_ "%llx:%x: is unplugged (state: 7), retrying...\012"
drivers/thunderbolt/switch.c:568 [thunderbolt]tb_wait_for_port =_ "%llx:%x: is disabled (state: 0)\012"
drivers/thunderbolt/switch.c:509 [thunderbolt]tb_dump_port =_ "  Credits (total/control): %u/%u\012"
drivers/thunderbolt/switch.c:508 [thunderbolt]tb_dump_port =_ "  NFC Credits: %#x\012"
drivers/thunderbolt/switch.c:507 [thunderbolt]tb_dump_port =_ "  Max counters: %d\012"
drivers/thunderbolt/switch.c:505 [thunderbolt]tb_dump_port =_ "  Max hop id (in/out): %d/%d\012"
drivers/thunderbolt/switch.c:500 [thunderbolt]tb_dump_port =_ " Port %d: %x:%x (Revision: %d, TB Version: %d, Type: %s (%#x))\012"
drivers/thunderbolt/cap.c:170 [thunderbolt]tb_switch_next_cap =_ "%llx: unknown capability %#x at %#x\012"
drivers/thunderbolt/path.c:564 [thunderbolt]tb_path_activate =_ "path activation complete\012"
drivers/thunderbolt/path.c:553 [thunderbolt]tb_path_activate =_ "%llx:%x: Writing hop %d\012"
drivers/thunderbolt/path.c:493 [thunderbolt]tb_path_activate =_ "activating %s path from %llx:%u to %llx:%u\012"
drivers/thunderbolt/path.c:464 [thunderbolt]tb_path_deactivate =_ "deactivating %s path from %llx:%u to %llx:%u\012"
drivers/thunderbolt/path.c:30 [thunderbolt]tb_dump_hop =_ "%llx:%x:   Unknown1: %#x Unknown2: %#x Unknown3: %#x\012"
drivers/thunderbolt/path.c:27 [thunderbolt]tb_dump_hop =_ "%llx:%x:   Flow Control (In/Eg): %d/%d Shared Buffer (In/Eg): %d/%d\012"
drivers/thunderbolt/path.c:25 [thunderbolt]tb_dump_hop =_ "%llx:%x:    Counter enabled: %d Counter index: %d\012"
drivers/thunderbolt/path.c:22 [thunderbolt]tb_dump_hop =_ "%llx:%x:   Weight: %d Priority: %d Credits: %d Drop: %d\012"
drivers/thunderbolt/path.c:20 [thunderbolt]tb_dump_hop =_ "%llx:%x:  In HopID: %d => Out port: %d Out HopID: %d\012"
drivers/thunderbolt/tunnel.c:1730 [thunderbolt]tb_tunnel_consumed_bandwidth =_ "%llx:%x <-> %llx:%x (%s): consumed bandwidth %d/%d Mb/s\012"
drivers/thunderbolt/tunnel.c:1654 [thunderbolt]tb_tunnel_deactivate =_ "%llx:%x <-> %llx:%x (%s): deactivating\012"
drivers/thunderbolt/tunnel.c:1586 [thunderbolt]tb_tunnel_restart =_ "%llx:%x <-> %llx:%x (%s): activating\012"
drivers/thunderbolt/tunnel.c:1482 [thunderbolt]tb_tunnel_alloc_usb3 =_ "%llx:%x: required bandwidth for USB3 tunnel %d Mb/s\012"
drivers/thunderbolt/tunnel.c:1437 [thunderbolt]tb_tunnel_discover_usb3 =_ "%llx:%x <-> %llx:%x (%s): discovered\012"
drivers/thunderbolt/tunnel.c:1426 [thunderbolt]tb_tunnel_discover_usb3 =_ "%llx:%x <-> %llx:%x (%s): currently allocated bandwidth %d/%d Mb/s\012"
drivers/thunderbolt/tunnel.c:1310 [thunderbolt]tb_usb3_reclaim_available_bandwidth =_ "%llx:%x <-> %llx:%x (%s): increased bandwidth allocation to %d/%d Mb/s\012"
drivers/thunderbolt/tunnel.c:1248 [thunderbolt]tb_usb3_release_unused_bandwidth =_ "%llx:%x <-> %llx:%x (%s): decreased bandwidth allocation to %d/%d Mb/s\012"
drivers/thunderbolt/tunnel.c:1202 [thunderbolt]tb_usb3_init =_ "%llx:%x <-> %llx:%x (%s): allocating initial bandwidth %d/%d Mb/s\012"
drivers/thunderbolt/tunnel.c:1111 [thunderbolt]tb_tunnel_alloc_dma =_ "%llx:%x <-> %llx:%x (%s): not enough buffers for TX path\012"
drivers/thunderbolt/tunnel.c:1099 [thunderbolt]tb_tunnel_alloc_dma =_ "%llx:%x <-> %llx:%x (%s): not enough buffers for RX path\012"
drivers/thunderbolt/tunnel.c:1026 [thunderbolt]tb_dma_release_credits =_ "%llx:%x: released %u DMA path credits\012"
drivers/thunderbolt/tunnel.c:945 [thunderbolt]tb_dma_reserve_credits =_ "%llx:%x: reserving %u credits for DMA path\012"
drivers/thunderbolt/tunnel.c:835 [thunderbolt]tb_tunnel_discover_dp =_ "%llx:%x <-> %llx:%x (%s): discovered\012"
drivers/thunderbolt/tunnel.c:572 [thunderbolt]tb_dp_xchg_caps =_ "%llx:%x: bandwidth reduced to %u Mb/s x%u = %u Mb/s\012"
drivers/thunderbolt/tunnel.c:552 [thunderbolt]tb_dp_xchg_caps =_ "%llx:%x: maximum supported bandwidth %u Mb/s x%u = %u Mb/s\012"
drivers/thunderbolt/tunnel.c:542 [thunderbolt]tb_dp_xchg_caps =_ "%llx:%x: maximum supported bandwidth %u Mb/s x%u = %u Mb/s\012"
drivers/thunderbolt/tunnel.c:274 [thunderbolt]tb_tunnel_discover_pci =_ "%llx:%x <-> %llx:%x (%s): discovered\012"
drivers/thunderbolt/eeprom.c:669 [thunderbolt]tb_drom_read =_ "%llx: DROM version: %d\012"
drivers/thunderbolt/eeprom.c:648 [thunderbolt]tb_drom_read =_ "%llx: reading drom (length: %#x)\012"
drivers/thunderbolt/domain.c:462 [thunderbolt]tb_domain_add =_ "security level set to %s\012"
drivers/thunderbolt/icm.c:2549 [thunderbolt]icm_probe =_ "using firmware connection manager\012"
drivers/thunderbolt/icm.c:2544 [thunderbolt]icm_probe =_ "ICM not supported on this controller\012"
drivers/thunderbolt/icm.c:2333 [thunderbolt]icm_usb4_switch_nvm_authenticate_status =_ "NVM_AUTH found for %llx flags %#x status %#x\012"
drivers/thunderbolt/icm.c:2238 [thunderbolt]icm_usb4_switch_nvm_authenticate =_ "NVM_AUTH request for %llx\012"
drivers/thunderbolt/icm.c:2194 [thunderbolt]icm_usb4_switch_nvm_auth_complete =_ "NVM_AUTH response for %llx flags %#x status %#x\012"
drivers/thunderbolt/icm.c:2128 [thunderbolt]icm_runtime_resume_switch =_ "runtime resuming timed out\012"
drivers/thunderbolt/icm.c:1983 [thunderbolt]icm_driver_ready =_ "USB4 proxy operations supported\012"
drivers/thunderbolt/icm.c:1819 [thunderbolt]icm_firmware_start =_ "starting ICM firmware\012"
drivers/thunderbolt/icm.c:1670 [thunderbolt]icm_icl_rtd3_veto =_ "ICM rtd3 veto=0x%08x\012"
drivers/thunderbolt/xdomain.c:1564 [thunderbolt]tb_xdomain_lane_bonding_disable =_ "lane bonding disabled\012"
drivers/thunderbolt/xdomain.c:1539 [thunderbolt]tb_xdomain_lane_bonding_enable =_ "lane bonding enabled\012"
drivers/thunderbolt/xdomain.c:1423 [thunderbolt]tb_xdomain_alloc =_ "remote UUID %pUb\012"
drivers/thunderbolt/xdomain.c:1421 [thunderbolt]tb_xdomain_alloc =_ "local UUID %pUb\012"
drivers/thunderbolt/xdomain.c:1166 [thunderbolt]tb_xdomain_properties_changed =_ "failed to send properties changed notification, retrying\012"
drivers/thunderbolt/xdomain.c:1160 [thunderbolt]tb_xdomain_properties_changed =_ "sending properties changed notification\012"
drivers/thunderbolt/xdomain.c:1077 [thunderbolt]tb_xdomain_get_properties =_ "failed to request remote properties, retrying\012"
drivers/thunderbolt/xdomain.c:1070 [thunderbolt]tb_xdomain_get_properties =_ "requesting remote properties\012"
drivers/thunderbolt/xdomain.c:1040 [thunderbolt]tb_xdomain_get_uuid =_ "remote UUID is different, unplugging\012"
drivers/thunderbolt/xdomain.c:1032 [thunderbolt]tb_xdomain_get_uuid =_ "intra-domain loop detected\012"
drivers/thunderbolt/xdomain.c:1029 [thunderbolt]tb_xdomain_get_uuid =_ "got remote UUID %pUb\012"
drivers/thunderbolt/xdomain.c:1024 [thunderbolt]tb_xdomain_get_uuid =_ "failed to read remote UUID\012"
drivers/thunderbolt/xdomain.c:1020 [thunderbolt]tb_xdomain_get_uuid =_ "failed to request UUID, retrying\012"
drivers/thunderbolt/xdomain.c:1015 [thunderbolt]tb_xdomain_get_uuid =_ "requesting remote UUID\012"
drivers/thunderbolt/xdomain.c:607 [thunderbolt]tb_xdp_handle_request =_ "%llx: received XDomain request %#x\012"
drivers/thunderbolt/lc.c:494 [thunderbolt]tb_lc_dp_sink_dealloc =_ "%llx:%x: sink %d de-allocated\012"
drivers/thunderbolt/lc.c:451 [thunderbolt]tb_lc_dp_sink_alloc =_ "%llx:%x: sink %d allocated\012"
drivers/thunderbolt/tmu.c:380 [thunderbolt]tb_switch_tmu_enable =_ "%llx: TMU: mode set to: %s\012"
drivers/thunderbolt/tmu.c:328 [thunderbolt]tb_switch_tmu_disable =_ "%llx: TMU: disabled\012"
drivers/thunderbolt/tmu.c:285 [thunderbolt]tb_switch_tmu_post_time =_ "%llx: TMU: updated local time to %#llx\012"
drivers/thunderbolt/tmu.c:233 [thunderbolt]tb_switch_tmu_post_time =_ "%llx: local_time[%d]=0x%08x\012"
drivers/thunderbolt/tmu.c:198 [thunderbolt]tb_switch_tmu_init =_ "%llx: TMU: current mode: %s\012"
drivers/thunderbolt/tmu.c:186 [thunderbolt]tb_switch_tmu_init =_ "%llx: TMU: supports uni-directional mode\012"
drivers/thunderbolt/usb4.c:1970 [thunderbolt]usb4_usb3_port_write_allocated_bandwidth =_ "%llx:%x: scaled bandwidth %u/%u, scale %u\012"
drivers/thunderbolt/usb4.c:763 [thunderbolt]usb4_switch_credits_init =_ "%llx:  unknown credit allocation index %#x, skipping\012"
drivers/thunderbolt/usb4.c:759 [thunderbolt]usb4_switch_credits_init =_ "%llx:  DMA: %u\012"
drivers/thunderbolt/usb4.c:755 [thunderbolt]usb4_switch_credits_init =_ "%llx:  PCIe: %u\012"
drivers/thunderbolt/usb4.c:751 [thunderbolt]usb4_switch_credits_init =_ "%llx:  DP main: %u\012"
drivers/thunderbolt/usb4.c:747 [thunderbolt]usb4_switch_credits_init =_ "%llx:  DP AUX: %u\012"
drivers/thunderbolt/usb4.c:743 [thunderbolt]usb4_switch_credits_init =_ "%llx:  USB3: %u\012"
drivers/thunderbolt/usb4.c:733 [thunderbolt]usb4_switch_credits_init =_ "%llx: credit allocation parameters:\012"
drivers/thunderbolt/usb4.c:269 [thunderbolt]usb4_switch_setup =_ "%llx: TBT3 support: %s, xHCI: %s\012"
drivers/thunderbolt/usb4.c:264 [thunderbolt]usb4_switch_setup =_ "%llx: link: %s\012"
drivers/thunderbolt/usb4.c:210 [thunderbolt]usb4_switch_check_wakes =_ "%llx:%x: USB4 wake: %s\012"
drivers/thunderbolt/usb4.c:194 [thunderbolt]usb4_switch_check_wakes =_ "%llx: PCIe wake: %s, USB3 wake: %s\012"
drivers/thunderbolt/usb4_port.c:125 [thunderbolt]offline_store =_ "%llx:%x: %s offline mode\012"
drivers/thunderbolt/retimer.c:215 [thunderbolt]tb_retimer_nvm_authenticate_status =_ "%llx:%x: reading NVM authentication status of retimers\012"
drivers/thunderbolt/quirks.c:19 [thunderbolt]quirk_dp_credit_allocation =_ "%llx: quirked DP main: %u\012"
drivers/thunderbolt/acpi.c:235 [thunderbolt]tb_acpi_retimer_set_power =_ "%llx:%x: ACPI: calling _DSM to power %s retimers\012"
drivers/thunderbolt/acpi.c:92 [thunderbolt]tb_acpi_add_link =_ "created link from %s\012"
drivers/powercap/idle_inject.c:233 [idle_inject]idle_inject_stop =_ "Stopping idle injection on CPUs '%*pbl'\012"
drivers/powercap/idle_inject.c:204 [idle_inject]idle_inject_start =_ "Starting injecting idle cycles on CPUs '%*pbl'\012"
drivers/mailbox/pcc.c:603 [pcc]pcc_init =_ "Err creating PCC platform bundle\012"
drivers/mailbox/pcc.c:595 [pcc]pcc_init =_ "ACPI PCC probe failed.\012"
drivers/mailbox/pcc.c:335 [pcc]pcc_send_data =_ "pcc_send_data: Invalid mbox_chan passed\012"
drivers/mailbox/pcc.c:295 [pcc]pcc_mbox_free_channel =_ "pcc_mbox_free_channel: Invalid mbox_chan passed\012"
drivers/mailbox/pcc.c:143 [pcc]write_register =_ "Error: Cannot write register of %u bit width"
drivers/mailbox/pcc.c:117 [pcc]read_register =_ "Error: Cannot read register of %u bit width"
drivers/mailbox/mailbox.c:356 [mailbox]mbox_request_channel =_ "%s: can't parse \042mboxes\042 property\012"
drivers/mailbox/mailbox.c:347 [mailbox]mbox_request_channel =_ "%s: No owner device node\012"
drivers/platform/x86/intel/turbo_max_3.c:70 [intel_turbo_max_3]get_oc_core_priority =_ "cpu %d max_ratio %d\012"
drivers/platform/x86/intel/turbo_max_3.c:64 [intel_turbo_max_3]get_oc_core_priority =_ "cpu %d OC mailbox cmd failed\012"
drivers/platform/x86/intel/turbo_max_3.c:58 [intel_turbo_max_3]get_oc_core_priority =_ "cpu %d OC mailbox still processing\012"
drivers/platform/x86/intel/turbo_max_3.c:53 [intel_turbo_max_3]get_oc_core_priority =_ "cpu %d OC mailbox read failed\012"
drivers/platform/x86/intel/turbo_max_3.c:46 [intel_turbo_max_3]get_oc_core_priority =_ "cpu %d OC mailbox write failed\012"
drivers/hid/usbhid/hid-core.c:1637 [usbhid]hid_resume =_ "resume status %d\012"
drivers/hid/usbhid/hid-core.c:1623 [usbhid]hid_suspend =_ "suspend\012"
drivers/hid/usbhid/hid-core.c:240 [usbhid]usbhid_restart_ctrl_queue =_ "Kicking head %d tail %d"
drivers/hid/usbhid/hid-core.c:201 [usbhid]usbhid_restart_out_queue =_ "Kicking head %d tail %d"
drivers/hid/usbhid/hid-core.c:137 [usbhid]hid_reset =_ "resetting device\012"
drivers/hid/usbhid/hid-core.c:130 [usbhid]hid_reset =_ "clear-halt failed: %d\012"
drivers/hid/usbhid/hid-core.c:124 [usbhid]hid_reset =_ "clear halt\012"
drivers/hid/usbhid/hid-core.c:110 [usbhid]hid_retry_timeout =_ "retrying intr urb\012"
drivers/hid/usbhid/hid-pidff.c:1312 [usbhid]hid_pidff_init =_ "device memory size is %d bytes\012"
drivers/hid/usbhid/hid-pidff.c:1308 [usbhid]hid_pidff_init =_ "max simultaneous effects is %d\012"
drivers/hid/usbhid/hid-pidff.c:1302 [usbhid]hid_pidff_init =_ "max effects is %d\012"
drivers/hid/usbhid/hid-pidff.c:1277 [usbhid]hid_pidff_init =_ "reports not ok, aborting\012"
drivers/hid/usbhid/hid-pidff.c:1261 [usbhid]hid_pidff_init =_ "not a PID device, no output report\012"
drivers/hid/usbhid/hid-pidff.c:1258 [usbhid]hid_pidff_init =_ "starting pid init\012"
drivers/hid/usbhid/hid-pidff.c:1199 [usbhid]pidff_reset =_ "pid_pool requested again\012"
drivers/hid/usbhid/hid-pidff.c:965 [usbhid]pidff_find_special_fields =_ "search done\012"
drivers/hid/usbhid/hid-pidff.c:944 [usbhid]pidff_find_special_fields =_ "finding special fields\012"
drivers/hid/usbhid/hid-pidff.c:894 [usbhid]pidff_find_special_field =_ "pidff_find_special_field, null report\012"
drivers/hid/usbhid/hid-pidff.c:877 [usbhid]pidff_reports_ok =_ "%d missing\012"
drivers/hid/usbhid/hid-pidff.c:860 [usbhid]pidff_find_reports =_ "found usage 0x%02x from collection array\012"
drivers/hid/usbhid/hid-pidff.c:841 [usbhid]pidff_find_reports =_ "found usage 0x%02x from field->logical\012"
drivers/hid/usbhid/hid-pidff.c:804 [usbhid]pidff_find_fields =_ "failed to locate %d\012"
drivers/hid/usbhid/hid-pidff.c:791 [usbhid]pidff_find_fields =_ "found %d at %d->%d\012"
drivers/hid/usbhid/hid-pidff.c:785 [usbhid]pidff_find_fields =_ "maxusage and report_count do not match, skipping\012"
drivers/hid/usbhid/hid-pidff.c:776 [usbhid]pidff_find_fields =_ "pidff_find_fields, null report\012"
drivers/hid/usbhid/hid-pidff.c:714 [usbhid]pidff_upload_effect =_ "uploaded\012"
drivers/hid/usbhid/hid-pidff.c:556 [usbhid]pidff_erase_effect =_ "starting to erase %d/%d\012"
drivers/hid/usbhid/hid-pidff.c:496 [usbhid]pidff_request_effect_upload =_ "not enough memory free: %d bytes\012"
drivers/hid/usbhid/hid-pidff.c:489 [usbhid]pidff_request_effect_upload =_ "device reported free memory: %d bytes\012"
drivers/hid/usbhid/hid-pidff.c:483 [usbhid]pidff_request_effect_upload =_ "pid_block_load requested\012"
drivers/hid/usbhid/hid-pidff.c:476 [usbhid]pidff_request_effect_upload =_ "create_new_effect sent, type: %d\012"
drivers/hid/usbhid/hid-pidff.c:251 [usbhid]pidff_set_envelope_report =_ "attack %u => %d\012"
drivers/hid/usbhid/hid-pidff.c:227 [usbhid]pidff_set_signed =_ "calculated from %d to %d\012"
drivers/hid/usbhid/hid-pidff.c:212 [usbhid]pidff_set =_ "calculated from %d to %d\012"
drivers/hid/hid-sensor-hub.c:746 [hid_sensor_hub]sensor_hub_remove =_ " hardware removed\012"
drivers/hid/hid-sensor-hub.c:702 [hid_sensor_hub]sensor_hub_probe =_ "Adding %s:%d\012"
drivers/hid/hid-sensor-hub.c:520 [hid_sensor_hub]sensor_hub_raw_event =_ "data was pending ...\012"
drivers/hid/hid-sensor-hub.c:505 [hid_sensor_hub]sensor_hub_raw_event =_ "collection->usage %x\012"
drivers/hid/hid-sensor-hub.c:496 [hid_sensor_hub]sensor_hub_raw_event =_ "%d collection_index:%x hid:%x sz:%x\012"
drivers/hid/hid-sensor-hub.c:485 [hid_sensor_hub]sensor_hub_raw_event =_ "maxfield:%d\012"
drivers/hid/hid-sensor-hub.c:483 [hid_sensor_hub]sensor_hub_raw_event =_ "sensor_hub_raw_event report id:0x%x size:%d type:%d\012"
drivers/hid/hid-sensor-hub.c:449 [hid_sensor_hub]sensor_hub_resume =_ " sensor_hub_resume\012"
drivers/hid/hid-sensor-hub.c:431 [hid_sensor_hub]sensor_hub_suspend =_ " sensor_hub_suspend\012"
drivers/hid/hid-input.c:2041 [hid]hidinput_connect =_ "Some usages could not be mapped, please use HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE if this is legitimate.\012"
drivers/hid/hid-input.c:461 [hid]hidinput_setup_battery =_ "device %x:%x:%x %d quirks %d\012"
drivers/firmware/efi/rci2-table.c:147 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table - sysfs initialization failed\012"
drivers/firmware/efi/rci2-table.c:136 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table - rci2 sysfs bin file creation failed\012"
drivers/firmware/efi/rci2-table.c:128 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table - tables_kobj creation failed\012"
drivers/firmware/efi/rci2-table.c:121 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table - incorrect checksum\012"
drivers/firmware/efi/rci2-table.c:116 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table - could not map RCI2 table\012"
drivers/firmware/efi/rci2-table.c:110 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table init failed - incorrect table length\012"
drivers/firmware/efi/rci2-table.c:98 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table init failed - incorrect signature\012"
drivers/firmware/efi/rci2-table.c:91 [rci2_table]efi_rci2_sysfs_init =_ "RCI2 table init failed - could not map RCI2 table\012"
drivers/firmware/efi/esrt.c:417 [esrt]esrt_sysfs_init =_ "esrt-sysfs: loaded.\012"
drivers/firmware/efi/esrt.c:381 [esrt]esrt_sysfs_init =_ "esrt-sysfs: loading.\012"
drivers/firmware/efi/esrt.c:337 [esrt]efi_esrt_init =_ "esrt-init: loaded.\012"
drivers/firmware/efi/esrt.c:251 [esrt]efi_esrt_init =_ "esrt-init: loading.\012"
drivers/firmware/qemu_fw_cfg.c:734 [qemu_fw_cfg]fw_cfg_sysfs_remove =_ "fw_cfg: unloading.\012"
drivers/firmware/qemu_fw_cfg.c:716 [qemu_fw_cfg]fw_cfg_sysfs_probe =_ "fw_cfg: loaded.\012"
drivers/firmware/dmi-sysfs.c:688 [dmi_sysfs]dmi_sysfs_exit =_ "dmi-sysfs: unloading.\012"
drivers/firmware/dmi-sysfs.c:676 [dmi_sysfs]dmi_sysfs_init =_ "dmi-sysfs: loaded.\012"
drivers/firmware/dmi-sysfs.c:656 [dmi_sysfs]dmi_sysfs_init =_ "dmi-sysfs: dmi entry is absent.\012"
drivers/firmware/dmi_scan.c:596 [dmi_scan]dmi_present =_ "SMBIOS version fixup (2.%d->2.%d)\012"
drivers/firmware/dmi_scan.c:591 [dmi_scan]dmi_present =_ "SMBIOS version fixup (2.%d->2.%d)\012"
drivers/leds/led-class.c:433 [led_class]led_classdev_register_ext =_ "Registered led device: %s\012"
drivers/cpuidle/sysfs.c:386 [sysfs]cpuidle_add_s2idle_attr_group =_ "%s: sysfs attribute group not created\012"
drivers/cpufreq/intel_pstate.c:3150 [intel_pstate]intel_pstate_platform_pwr_mgmt_exists =_ "P states are controlled in Out of Band mode by the firmware/hardware\012"
drivers/cpufreq/intel_pstate.c:3149 [intel_pstate]intel_pstate_platform_pwr_mgmt_exists =_ "Bit 8 or 18 in the MISC_PWR_MGMT MSR set\012"
drivers/cpufreq/intel_pstate.c:3108 [intel_pstate]intel_pstate_has_acpi_ppc =_ "ACPI _PPC not found\012"
drivers/cpufreq/intel_pstate.c:3092 [intel_pstate]intel_pstate_no_acpi_pcch =_ "ACPI PCCH not found\012"
drivers/cpufreq/intel_pstate.c:3075 [intel_pstate]intel_pstate_no_acpi_pss =_ "ACPI _PSS not found\012"
drivers/cpufreq/intel_pstate.c:2538 [intel_pstate]intel_pstate_cpu_exit =_ "CPU %d exiting\012"
drivers/cpufreq/intel_pstate.c:2513 [intel_pstate]intel_pstate_cpu_online =_ "CPU %d going online\012"
drivers/cpufreq/intel_pstate.c:2488 [intel_pstate]intel_cpufreq_cpu_offline =_ "CPU %d going offline\012"
drivers/cpufreq/intel_pstate.c:2454 [intel_pstate]intel_pstate_adjust_policy_max =_ "policy->max > max non turbo frequency\012"
drivers/cpufreq/intel_pstate.c:2410 [intel_pstate]intel_pstate_set_policy =_ "set_policy cpuinfo.max %u policy->max %u\012"
drivers/cpufreq/intel_pstate.c:2398 [intel_pstate]intel_pstate_update_perf_limits =_ "cpu:%d max_perf_ratio:%d min_perf_ratio:%d\012"
drivers/cpufreq/intel_pstate.c:2385 [intel_pstate]intel_pstate_update_perf_limits =_ "cpu:%d global_min:%d global_max:%d\012"
drivers/cpufreq/intel_pstate.c:2369 [intel_pstate]intel_pstate_update_perf_limits =_ "cpu:%d min_policy_perf:%d max_policy_perf:%d\012"
drivers/cpufreq/intel_pstate.c:2298 [intel_pstate]intel_pstate_init_cpu =_ "controlling: cpu %d\012"
drivers/cpufreq/intel_pstate.c:1742 [intel_pstate]core_get_max_pstate =_ "max_pstate=TAC %x\012"
drivers/cpufreq/intel_pstate.c:1706 [intel_pstate]core_get_tdp_ratio =_ "tdp_ratio %x\012"
drivers/cpufreq/intel_pstate.c:1074 [intel_pstate]intel_pstate_resume =_ "CPU %d resuming\012"
drivers/cpufreq/intel_pstate.c:1063 [intel_pstate]intel_pstate_suspend =_ "CPU %d suspending\012"
drivers/cpufreq/intel_pstate.c:541 [intel_pstate]intel_pstate_hybrid_hwp_adjust =_ "CPU%d: HWP-to-frequency scaling factor: %d\012"
drivers/cpufreq/intel_pstate.c:540 [intel_pstate]intel_pstate_hybrid_hwp_adjust =_ "CPU%d: HWP_CAP highest = %d\012"
drivers/cpufreq/intel_pstate.c:539 [intel_pstate]intel_pstate_hybrid_hwp_adjust =_ "CPU%d: HWP_CAP guaranteed = %d\012"
drivers/cpufreq/intel_pstate.c:538 [intel_pstate]intel_pstate_hybrid_hwp_adjust =_ "CPU%d: perf_ctl_scaling = %d\012"
drivers/cpufreq/intel_pstate.c:537 [intel_pstate]intel_pstate_hybrid_hwp_adjust =_ "CPU%d: perf_ctl_turbo = %d\012"
drivers/cpufreq/intel_pstate.c:536 [intel_pstate]intel_pstate_hybrid_hwp_adjust =_ "CPU%d: perf_ctl_max_phys = %d\012"
drivers/cpufreq/intel_pstate.c:452 [intel_pstate]intel_pstate_init_acpi_perf_limits =_ "_PPC limits will be enforced\012"
drivers/cpufreq/intel_pstate.c:444 [intel_pstate]intel_pstate_init_acpi_perf_limits =_ "     %cP%d: %u MHz, %u mW, 0x%x\012"
drivers/cpufreq/intel_pstate.c:442 [intel_pstate]intel_pstate_init_acpi_perf_limits =_ "CPU%u - ACPI _PSS perf data\012"
drivers/cpufreq/cpufreq_userspace.c:104 [cpufreq_userspace]cpufreq_userspace_policy_limits =_ "limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\012"
drivers/cpufreq/cpufreq_userspace.c:90 [cpufreq_userspace]cpufreq_userspace_policy_stop =_ "managing cpu %u stopped\012"
drivers/cpufreq/cpufreq_userspace.c:77 [cpufreq_userspace]cpufreq_userspace_policy_start =_ "started managing cpu %u\012"
drivers/cpufreq/cpufreq_userspace.c:33 [cpufreq_userspace]cpufreq_set =_ "cpufreq_set for cpu %u, freq %u kHz\012"
drivers/cpufreq/cpufreq_powersave.c:16 [cpufreq_powersave]cpufreq_gov_powersave_limits =_ "setting to %u kHz\012"
drivers/cpufreq/cpufreq_performance.c:16 [cpufreq_performance]cpufreq_gov_performance_limits =_ "setting to %u kHz\012"
drivers/cpufreq/cpufreq_stats.c:204 [cpufreq_stats]cpufreq_stats_free_table =_ "%s: Free stats table\012"
drivers/cpufreq/freq_table.c:348 [freq_table]set_freq_table_sorted =_ "Freq table is sorted in %s order\012"
drivers/cpufreq/freq_table.c:333 [freq_table]set_freq_table_sorted =_ "Freq table is unsorted\012"
drivers/cpufreq/freq_table.c:323 [freq_table]set_freq_table_sorted =_ "Freq table is unsorted\012"
drivers/cpufreq/freq_table.c:218 [freq_table]cpufreq_frequency_table_get_index =_ "%s: Unable to find frequency table\012"
drivers/cpufreq/freq_table.c:205 [freq_table]cpufreq_table_index_unsorted =_ "target index is %u, freq is:%u kHz\012"
drivers/cpufreq/freq_table.c:135 [freq_table]cpufreq_table_index_unsorted =_ "request for target %u kHz (relation: %u) for cpu %u\012"
drivers/cpufreq/freq_table.c:98 [freq_table]cpufreq_frequency_table_verify =_ "verification lead to (%u - %u kHz) for cpu %u\012"
drivers/cpufreq/freq_table.c:76 [freq_table]cpufreq_frequency_table_verify =_ "request for verification of policy (%u - %u kHz) for cpu %u\012"
drivers/cpufreq/freq_table.c:47 [freq_table]cpufreq_frequency_table_cpuinfo =_ "table entry %u: %u kHz\012"
drivers/cpufreq/cpufreq.c:2913 [cpufreq]cpufreq_unregister_driver =_ "unregistering driver %s\012"
drivers/cpufreq/cpufreq.c:2881 [cpufreq]cpufreq_register_driver =_ "driver %s up and running\012"
drivers/cpufreq/cpufreq.c:2867 [cpufreq]cpufreq_register_driver =_ "%s: No CPU initialized for driver %s\012"
drivers/cpufreq/cpufreq.c:2848 [cpufreq]cpufreq_register_driver =_ "supports frequency invariance"
drivers/cpufreq/cpufreq.c:2828 [cpufreq]cpufreq_register_driver =_ "trying to register driver %s\012"
drivers/cpufreq/cpufreq.c:2605 [cpufreq]cpufreq_set_policy =_ "starting governor %s failed\012"
drivers/cpufreq/cpufreq.c:2597 [cpufreq]cpufreq_set_policy =_ "governor change\012"
drivers/cpufreq/cpufreq.c:2581 [cpufreq]cpufreq_set_policy =_ "governor switch\012"
drivers/cpufreq/cpufreq.c:2576 [cpufreq]cpufreq_set_policy =_ "governor limits update\012"
drivers/cpufreq/cpufreq.c:2571 [cpufreq]cpufreq_set_policy =_ "setting range\012"
drivers/cpufreq/cpufreq.c:2566 [cpufreq]cpufreq_set_policy =_ "new min and max freqs are %u - %u kHz\012"
drivers/cpufreq/cpufreq.c:2542 [cpufreq]cpufreq_set_policy =_ "setting new policy for CPU %u: %u - %u kHz\012"
drivers/cpufreq/cpufreq.c:2423 [cpufreq]cpufreq_governor_limits =_ "%s: for CPU %u\012"
drivers/cpufreq/cpufreq.c:2412 [cpufreq]cpufreq_stop_governor =_ "%s: for CPU %u\012"
drivers/cpufreq/cpufreq.c:2390 [cpufreq]cpufreq_start_governor =_ "%s: for CPU %u\012"
drivers/cpufreq/cpufreq.c:2372 [cpufreq]cpufreq_exit_governor =_ "%s: for CPU %u\012"
drivers/cpufreq/cpufreq.c:2352 [cpufreq]cpufreq_init_governor =_ "%s: for CPU %u\012"
drivers/cpufreq/cpufreq.c:2277 [cpufreq]__cpufreq_driver_target =_ "target for CPU %u: %u kHz, relation %u, requested %u kHz\012"
drivers/cpufreq/cpufreq.c:2235 [cpufreq]__target_index =_ "%s: cpu: %d, oldfreq: %u, new freq: %u\012"
drivers/cpufreq/cpufreq.c:2192 [cpufreq]__target_intermediate =_ "%s: cpu: %d, switching to intermediate freq: oldfreq: %u, intermediate freq: %u\012"
drivers/cpufreq/cpufreq.c:1936 [cpufreq]cpufreq_resume =_ "%s: Resuming Governors\012"
drivers/cpufreq/cpufreq.c:1896 [cpufreq]cpufreq_suspend =_ "%s: Suspending Governors\012"
drivers/cpufreq/cpufreq.c:1865 [cpufreq]cpufreq_generic_suspend =_ "%s: Setting suspend-freq: %u\012"
drivers/cpufreq/cpufreq.c:1861 [cpufreq]cpufreq_generic_suspend =_ "%s: suspend_freq not defined\012"
drivers/cpufreq/cpufreq.c:1696 [cpufreq]cpufreq_out_of_sync =_ "Warning: CPU frequency out of sync: cpufreq and timing core thinks of %u, is %u kHz\012"
drivers/cpufreq/cpufreq.c:1636 [cpufreq]cpufreq_offline =_ "%s: No cpu_data found\012"
drivers/cpufreq/cpufreq.c:1632 [cpufreq]cpufreq_offline =_ "%s: unregistering CPU %u\012"
drivers/cpufreq/cpufreq.c:1559 [cpufreq]cpufreq_add_dev =_ "%s: adding CPU%u\012"
drivers/cpufreq/cpufreq.c:1525 [cpufreq]cpufreq_online =_ "initialization complete\012"
drivers/cpufreq/cpufreq.c:1368 [cpufreq]cpufreq_online =_ "%s: %d: initialization failed\012"
drivers/cpufreq/cpufreq.c:1352 [cpufreq]cpufreq_online =_ "%s: %d: initialization failed\012"
drivers/cpufreq/cpufreq.c:1327 [cpufreq]cpufreq_online =_ "%s: bringing CPU%u online\012"
drivers/cpufreq/cpufreq.c:1192 [cpufreq]cpufreq_policy_put_kobj =_ "wait complete\012"
drivers/cpufreq/cpufreq.c:1190 [cpufreq]cpufreq_policy_put_kobj =_ "waiting for dropping of refcount\012"
drivers/cpufreq/cpufreq.c:1149 [cpufreq]handle_update =_ "handle_update for cpu %u called\012"
drivers/cpufreq/cpufreq.c:1137 [cpufreq]refresh_frequency_limits =_ "updating policy for CPU %u\012"
drivers/cpufreq/cpufreq.c:1073 [cpufreq]cpufreq_init_policy =_ "Restoring governor %s for cpu %d\012"
drivers/cpufreq/cpufreq.c:1027 [cpufreq]remove_cpu_dev_symlink =_ "%s: Removing symlink\012"
drivers/cpufreq/cpufreq.c:1019 [cpufreq]add_cpu_dev_symlink =_ "%s: Adding symlink\012"
drivers/cpufreq/cpufreq.c:995 [cpufreq]cpufreq_sysfs_release =_ "last reference is dropped\012"
drivers/cpufreq/cpufreq.c:614 [cpufreq]store_boost =_ "%s: cpufreq BOOST %s\012"
drivers/cpufreq/cpufreq.c:380 [cpufreq]cpufreq_notify_transition =_ "FREQ: %u - CPUs: %*pbl\012"
drivers/cpufreq/cpufreq.c:367 [cpufreq]cpufreq_notify_transition =_ "Warning: CPU frequency is %u, cpufreq assumed %u kHz\012"
drivers/cpufreq/cpufreq.c:356 [cpufreq]cpufreq_notify_transition =_ "notification %u of frequency transition to %u kHz\012"
drivers/md/md.c:9952 [md_mod]md_autostart_arrays =_ "md: Scanned %d and added %d devices.\012"
drivers/md/md.c:9664 [md_mod]md_geninit =_ "md: sizeof(mdp_super_t) = %d\012"
drivers/md/md.c:9339 [md_mod]md_check_recovery =_ "md: %s in immediate safe mode\012"
drivers/md/md.c:9106 [md_mod]md_do_sync =_ "md: checkpointing %s of %s.\012"
drivers/md/md.c:8956 [md_mod]md_do_sync =_ "md: resuming %s of %s from checkpoint.\012"
drivers/md/md.c:8949 [md_mod]md_do_sync =_ "md: using %dk window, over a total of %lluk.\012"
drivers/md/md.c:8931 [md_mod]md_do_sync =_ "md: using maximum available idle IO bandwidth (but not more than %d KB/sec) for %s.\012"
drivers/md/md.c:8930 [md_mod]md_do_sync =_ "md: minimum _guaranteed_  speed: %d KB/sec/disk.\012"
drivers/md/md.c:8438 [md_mod]unregister_md_personality =_ "md: %s personality unregistered\012"
drivers/md/md.c:8427 [md_mod]register_md_personality =_ "md: %s personality registered for level %d\012"
drivers/md/md.c:8033 [md_mod]md_unregister_thread =_ "interrupting MD-thread pid %d\012"
drivers/md/md.c:7983 [md_mod]md_wakeup_thread =_ "md: waking up MD thread %s.\012"
drivers/md/md.c:7647 [md_mod]md_ioctl =_ "md: ioctl lock interrupted, reason %d, cmd %d\012"
drivers/md/md.c:7015 [md_mod]hot_remove_disk =_ "md: cannot remove active disk %s from %s ...\012"
drivers/md/md.c:6962 [md_mod]md_add_new_disk =_ "md: nonpersistent superblock ...\012"
drivers/md/md.c:6602 [md_mod]autorun_devices =_ "md: created %s\012"
drivers/md/md.c:6566 [md_mod]autorun_devices =_ "md:  adding %s ...\012"
drivers/md/md.c:6562 [md_mod]autorun_devices =_ "md: considering %s ...\012"
drivers/md/md.c:6210 [md_mod]restart_array =_ "md: %s switched to read-write mode.\012"
drivers/md/md.c:5795 [md_mod]md_alloc =_ "pointless warning\012"
drivers/md/md.c:5789 [md_mod]md_alloc =_ "md: cannot register %s/md - name in use\012"
drivers/md/md.c:2880 [md_mod]md_update_sb =_ "md: %s (skipping faulty)\012"
drivers/md/md.c:2867 [md_mod]md_update_sb =_ "md: (write) %s's sb offset: %llu\012"
drivers/md/md.c:2850 [md_mod]md_update_sb =_ "md: updating %s RAID superblock on device (in sync %d)\012"
drivers/md/md.c:2600 [md_mod]export_rdev =_ "md: export_rdev(%s)\012"
drivers/md/md.c:2545 [md_mod]unbind_rdev_from_array =_ "md: unbind<%s>\012"
drivers/md/md.c:2501 [md_mod]bind_rdev_to_array =_ "md: bind<%s>\012"
drivers/md/md.c:2394 [md_mod]md_integrity_register =_ "md: data integrity enabled on %s\012"
drivers/md/md.c:1972 [md_mod]super_1_validate =_ "md: %s: rdev[%pg]: role=%d(0x%x) according to freshest %pg\012"
drivers/md/md-bitmap.c:1887 [md_mod]md_bitmap_create =_ "created bitmap (%lu pages) for device %s\012"
drivers/md/md-bitmap.c:1778 [md_mod]md_bitmap_wait_behind_writes =_ "md:%s: behind writes in progress - waiting to stop.\012"
drivers/md/md-bitmap.c:1467 [md_mod]md_bitmap_endwrite =_ "dec write-behind count %d/%lu\012"
drivers/md/md-bitmap.c:1407 [md_mod]md_bitmap_startwrite =_ "inc write-behind count %d/%lu\012"
drivers/md/md-bitmap.c:1161 [md_mod]md_bitmap_init_from_disk =_ "%s: bitmap initialized from disk: read %lu pages, set %lu of %lu bits\012"
drivers/md/md-bitmap.c:943 [md_mod]md_bitmap_file_set_bit =_ "set file bit %lu page %lu\012"
drivers/md/md-bitmap.c:609 [md_mod]md_bitmap_read_sb =_ "%s:%d bm slot: %d offset: %llu\012"
drivers/md/md-bitmap.c:538 [md_mod]md_bitmap_new_disk_sb =_ "Choosing daemon_sleep default (5 sec)\012"
drivers/md/md-bitmap.c:497 [md_mod]md_bitmap_print_sb =_ "max write behind: %u\012"
drivers/md/md-bitmap.c:495 [md_mod]md_bitmap_print_sb =_ "     sync size: %llu KB\012"
drivers/md/md-bitmap.c:494 [md_mod]md_bitmap_print_sb =_ "  daemon sleep: %us\012"
drivers/md/md-bitmap.c:493 [md_mod]md_bitmap_print_sb =_ "     chunksize: %u B\012"
drivers/md/md-bitmap.c:492 [md_mod]md_bitmap_print_sb =_ "         state: %08x\012"
drivers/md/md-bitmap.c:490 [md_mod]md_bitmap_print_sb =_ "events cleared: %llu\012"
drivers/md/md-bitmap.c:488 [md_mod]md_bitmap_print_sb =_ "        events: %llu\012"
drivers/md/md-bitmap.c:483 [md_mod]md_bitmap_print_sb =_ "          uuid: %08x.%08x.%08x.%08x\012"
drivers/md/md-bitmap.c:482 [md_mod]md_bitmap_print_sb =_ "       version: %u\012"
drivers/md/md-bitmap.c:481 [md_mod]md_bitmap_print_sb =_ "         magic: %08x\012"
drivers/md/md-bitmap.c:480 [md_mod]md_bitmap_print_sb =_ "%s: bitmap file superblock:\012"
drivers/md/md-bitmap.c:355 [md_mod]read_page =_ "read bitmap file (%dB @ %llu)\012"
drivers/md/md-bitmap.c:87 [md_mod]md_bitmap_checkpage =_ "md/bitmap: map page allocation failed, hijacking\012"
drivers/md/raid5.c:7861 [raid456]print_raid5_conf =_ " disk %d, o:%d, dev:%s\012"
drivers/md/raid5.c:7853 [raid456]print_raid5_conf =_ " --- level:%d rd:%d wd:%d\012"
drivers/md/raid5.c:7850 [raid456]print_raid5_conf =_ "(conf==NULL)\012"
drivers/md/raid5.c:7848 [raid456]print_raid5_conf =_ "RAID conf printout:\012"
drivers/md/raid5.c:7586 [raid456]raid5_run =_ "md/raid:%s: reshape will continue\012"
drivers/md/raid5.c:7381 [raid456]setup_conf =_ "md/raid:%s: allocated %dkB\012"
drivers/md/raid5.c:7314 [raid456]setup_conf =_ "raid456: run(%s) called.\012"
drivers/md/raid5.c:6555 [raid456]raid5d =_ "--- raid5d inactive\012"
drivers/md/raid5.c:6535 [raid456]raid5d =_ "%d stripes handled\012"
drivers/md/raid5.c:6482 [raid456]raid5d =_ "+++ raid5d active\012"
drivers/md/raid5.c:6465 [raid456]raid5_do_work =_ "--- raid5worker inactive\012"
drivers/md/raid5.c:6454 [raid456]raid5_do_work =_ "%d stripes handled\012"
drivers/md/raid5.c:6434 [raid456]raid5_do_work =_ "+++ raid5worker active\012"
drivers/md/raid5.c:5861 [raid456]raid5_make_request =_ "raid456: raid5_make_request, sector %llu logical %llu\012"
drivers/md/raid5.c:5544 [raid456]__get_priority_stripe =_ "%s: handle: %s hold: %s full_writes: %d bypass_count: %d\012"
drivers/md/raid5.c:5404 [raid456]raid5_read_one_chunk =_ "%s: non aligned\012"
drivers/md/raid5.c:5388 [raid456]raid5_align_endio =_ "raid5_align_endio : io error...handing IO for a retry\012"
drivers/md/raid5.c:5002 [raid456]handle_stripe =_ "Writing block %d\012"
drivers/md/raid5.c:4956 [raid456]handle_stripe =_ "locked=%d uptodate=%d to_read=%d to_write=%d failed=%d failed_num=%d,%d\012"
drivers/md/raid5.c:4923 [raid456]handle_stripe =_ "handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d, qd_idx=%d\012, check:%d, reconstruct:%d\012"
drivers/md/raid5.c:4607 [raid456]analyse_stripe =_ "check %d: state 0x%lx read %p write %p written %p\012"
drivers/md/raid5.c:4202 [raid456]handle_stripe_dirtying =_ "Read_old block %d for Reconstruct\012"
drivers/md/raid5.c:4177 [raid456]handle_stripe_dirtying =_ "Read_old block %d for r-m-w\012"
drivers/md/raid5.c:4127 [raid456]handle_stripe_dirtying =_ "for sector %llu state 0x%lx, rmw=%d rcw=%d\012"
drivers/md/raid5.c:4097 [raid456]handle_stripe_dirtying =_ "force RCW rmw_level=%u, recovery_cp=%llu sh->sector=%llu\012"
drivers/md/raid5.c:3978 [raid456]handle_stripe_clean_event =_ "Return write for disc %d\012"
drivers/md/raid5.c:3908 [raid456]fetch_block =_ "Reading block %d (sync=%d)\012"
drivers/md/raid5.c:3892 [raid456]fetch_block =_ "Computing stripe %llu blocks %d,%d\012"
drivers/md/raid5.c:3863 [raid456]fetch_block =_ "Computing stripe %llu block %d\012"
drivers/md/raid5.c:3489 [raid456]add_stripe_bio =_ "added bi b#%llu to stripe s#%llu, disk %d.\012"
drivers/md/raid5.c:3411 [raid456]add_stripe_bio =_ "adding bi b#%llu to stripe s#%llu\012"
drivers/md/raid5.c:3394 [raid456]schedule_reconstruction =_ "%s: stripe %llu locked: %d ops_request: %lx\012"
drivers/md/raid5.c:2878 [raid456]raid5_error =_ "raid456: error called\012"
drivers/md/raid5.c:2822 [raid456]raid5_end_write_request =_ "end_write_request %llu/%d, count %d, error: %d.\012"
drivers/md/raid5.c:2676 [raid456]raid5_end_read_request =_ "end_read_request %llu/%d, count: %d, error %d.\012"
drivers/md/raid5.c:2195 [raid456]ops_run_check_pq =_ "%s: stripe %llu checkp: %d\012"
drivers/md/raid5.c:2161 [raid456]ops_run_check_p =_ "%s: stripe %llu\012"
drivers/md/raid5.c:2139 [raid456]ops_complete_check =_ "%s: stripe %llu\012"
drivers/md/raid5.c:2085 [raid456]ops_run_reconstruct6 =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1991 [raid456]ops_run_reconstruct5 =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1936 [raid456]ops_complete_reconstruct =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1863 [raid456]ops_run_biodrain =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1842 [raid456]ops_run_prexor6 =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1806 [raid456]ops_run_prexor5 =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1780 [raid456]ops_complete_prexor =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1704 [raid456]ops_run_compute6_2 =_ "%s: stripe: %llu faila: %d failb: %d\012"
drivers/md/raid5.c:1673 [raid456]ops_run_compute6_2 =_ "%s: stripe %llu block1: %d block2: %d\012"
drivers/md/raid5.c:1617 [raid456]ops_run_compute6_1 =_ "%s: stripe %llu block: %d\012"
drivers/md/raid5.c:1512 [raid456]ops_run_compute5 =_ "%s: stripe %llu block: %d\012"
drivers/md/raid5.c:1459 [raid456]ops_complete_compute =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1416 [raid456]ops_run_biofill =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1376 [raid456]ops_complete_biofill =_ "%s: stripe %llu\012"
drivers/md/raid5.c:1287 [raid456]ops_run_io =_ "skip op %d on disc %d for sector %llu\012"
drivers/md/raid5.c:1247 [raid456]ops_run_io =_ "%s: for %llu schedule op %d on replacement disc %d\012"
drivers/md/raid5.c:1181 [raid456]ops_run_io =_ "%s: for %llu schedule op %d on disc %d\012"
drivers/md/raid5.c:710 [raid456]raid5_get_active_stripe =_ "get_stripe, sector %llu\012"
drivers/md/raid5.c:616 [raid456]__find_stripe =_ "__stripe %llu not in cache\012"
drivers/md/raid5.c:612 [raid456]__find_stripe =_ "__find_stripe, sector %llu\012"
drivers/md/raid5.c:575 [raid456]init_stripe =_ "init_stripe called, stripe %llu\012"
drivers/md/raid5.c:425 [raid456]insert_hash =_ "insert_hash(), stripe %llu\012"
drivers/md/raid5.c:415 [raid456]remove_hash =_ "remove_hash(), stripe %llu\012"
drivers/md/raid5-cache.c:3073 [raid456]r5l_init_log =_ "md/raid:%s: using device %s as journal\012"
drivers/md/raid5-cache.c:2593 [raid456]r5c_journal_mode_set =_ "md/raid:%s: setting r5c cache mode to %d: %s\012"
drivers/md/raid5-cache.c:2157 [raid456]r5c_recovery_analyze_meta_block =_ "md/raid:%s: Increasing stripe cache size to %d to recovery data on journal.\012"
drivers/md/raid5-ppl.c:1476 [raid456]ppl_modify_log =_ "%s: disk: %d operation: %s dev: %s\012"
drivers/md/raid5-ppl.c:1340 [raid456]ppl_init_log =_ "md/raid:%s: enabling distributed Partial Parity Log\012"
drivers/md/raid5-ppl.c:1231 [raid456]ppl_load =_ "%s: return: %d mismatch_count: %d recovered_entries: %d\012"
drivers/md/raid5-ppl.c:1189 [raid456]ppl_load_distributed =_ "%s: return: %d mismatch_count: %d recovered_entries: %d\012"
drivers/md/raid5-ppl.c:1174 [raid456]ppl_load_distributed =_ "%s: latest PPL found at offset: %llu, with generation: %llu\012"
drivers/md/raid5-ppl.c:1140 [raid456]ppl_load_distributed =_ "%s: ppl header signature does not match: stored: 0x%x configured: 0x%x (offset: %llu)\012"
drivers/md/raid5-ppl.c:1123 [raid456]ppl_load_distributed =_ "%s: ppl header crc does not match: stored: 0x%x calculated: 0x%x (offset: %llu)\012"
drivers/md/raid5-ppl.c:1091 [raid456]ppl_load_distributed =_ "%s: disk: %d\012"
drivers/md/raid5-ppl.c:1053 [raid456]ppl_write_empty_header =_ "%s: disk: %d ppl_sector: %llu\012"
drivers/md/raid5-ppl.c:1026 [raid456]ppl_recover =_ "%s: ppl entry crc does not match: stored: 0x%x calculated: 0x%x\012"
drivers/md/raid5-ppl.c:994 [raid456]ppl_recover =_ "%s: disk: %d entry: %d ppl_sector: %llu pp_size: %u\012"
drivers/md/raid5-ppl.c:955 [raid456]ppl_recover_entry =_ "%s:%*s parity write error!\012"
drivers/md/raid5-ppl.c:949 [raid456]ppl_recover_entry =_ "%s:%*s write parity at sector %llu, disk %s\012"
drivers/md/raid5-ppl.c:932 [raid456]ppl_recover_entry =_ "%s:%*s read failed!\012"
drivers/md/raid5-ppl.c:925 [raid456]ppl_recover_entry =_ "%s:%*s reading pp disk sector %llu\012"
drivers/md/raid5-ppl.c:910 [raid456]ppl_recover_entry =_ "%s:%*s read failed!\012"
drivers/md/raid5-ppl.c:904 [raid456]ppl_recover_entry =_ "%s:%*s reading data member disk %s sector %llu\012"
drivers/md/raid5-ppl.c:898 [raid456]ppl_recover_entry =_ "%s:%*s data member disk %d missing\012"
drivers/md/raid5-ppl.c:890 [raid456]ppl_recover_entry =_ "%s:%*s processing array sector %llu => data member disk %d, sector %llu\012"
drivers/md/raid5-ppl.c:878 [raid456]ppl_recover_entry =_ "%s:%*s array sector %llu doesn't need parity update\012"
drivers/md/raid5-ppl.c:873 [raid456]ppl_recover_entry =_ "%s:%*s data member disk %d start\012"
drivers/md/raid5-ppl.c:860 [raid456]ppl_recover_entry =_ "%s:%*s iter %d start\012"
drivers/md/raid5-ppl.c:841 [raid456]ppl_recover_entry =_ "%s: array sector first: %llu last: %llu\012"
drivers/md/raid5-ppl.c:646 [raid456]ppl_do_flush =_ "%s: dev: %s\012"
drivers/md/raid5-ppl.c:595 [raid456]ppl_flush_endio =_ "%s: dev: %s\012"
drivers/md/raid5-ppl.c:560 [raid456]ppl_io_unit_finished =_ "%s: seq: %llu\012"
drivers/md/raid5-ppl.c:474 [raid456]ppl_submit_iounit =_ "%s: log->current_io_sector: %llu\012"
drivers/md/raid5-ppl.c:448 [raid456]ppl_submit_iounit =_ "%s: seq: %llu entry: %d data_sector: %llu pp_size: %u data_size: %u\012"
drivers/md/raid5-ppl.c:421 [raid456]ppl_submit_iounit_bio =_ "%s: seq: %llu size: %u sector: %llu dev: %s\012"
drivers/md/raid5-ppl.c:404 [raid456]ppl_log_endio =_ "%s: seq: %llu\012"
drivers/md/raid5-ppl.c:309 [raid456]ppl_log_stripe =_ "%s: seq: %llu data_sector: %llu data_disks: %d\012"
drivers/md/raid5-ppl.c:281 [raid456]ppl_log_stripe =_ "%s: add io_unit blocked by seq: %llu\012"
drivers/md/raid5-ppl.c:276 [raid456]ppl_log_stripe =_ "%s: stripe: %llu\012"
drivers/md/raid5-ppl.c:166 [raid456]ops_run_partial_parity =_ "%s: stripe %llu\012"
drivers/md/raid10.c:2079 [raid10]print_conf =_ " disk %d, wo:%d, o:%d, dev:%s\012"
drivers/md/raid10.c:2070 [raid10]print_conf =_ " --- wd:%d rd:%d\012"
drivers/md/raid10.c:2067 [raid10]print_conf =_ "(!conf)\012"
drivers/md/raid10.c:2065 [raid10]print_conf =_ "RAID10 conf printout:\012"
drivers/md/raid1.c:1682 [raid1]print_conf =_ " disk %d, wo:%d, o:%d, dev:%s\012"
drivers/md/raid1.c:1674 [raid1]print_conf =_ " --- wd:%d rd:%d\012"
drivers/md/raid1.c:1671 [raid1]print_conf =_ "(!conf)\012"
drivers/md/raid1.c:1669 [raid1]print_conf =_ "RAID1 conf printout:\012"
drivers/md/raid1.c:1143 [raid1]alloc_behind_master_bio =_ "%dB behind alloc failed, doing sync I/O\012"
drivers/md/raid1.c:541 [raid1]raid1_end_write_request =_ "raid1: behind end write sectors %llu-%llu\012"
drivers/md/raid1.c:315 [raid1]raid_end_bio_io =_ "raid1: sync end %s on sectors %llu-%llu\012"
drivers/md/raid0.c:440 [raid0]raid0_run =_ "md/raid0:%s: md_size is %llu sectors.\012"
drivers/md/raid0.c:289 [raid0]create_strip_zones =_ "md/raid0:%s: done.\012"
drivers/md/raid0.c:256 [raid0]create_strip_zones =_ "md/raid0:%s: current zone start: %llu\012"
drivers/md/raid0.c:249 [raid0]create_strip_zones =_ "md/raid0:%s: zone->nb_dev: %d, sectors: %llu\012"
drivers/md/raid0.c:241 [raid0]create_strip_zones =_ "md/raid0:%s:  (%llu) is smallest!.\012"
drivers/md/raid0.c:233 [raid0]create_strip_zones =_ "md/raid0:%s: checking %s ... contained as device %d\012"
drivers/md/raid0.c:228 [raid0]create_strip_zones =_ "md/raid0:%s: checking %s ... nope\012"
drivers/md/raid0.c:220 [raid0]create_strip_zones =_ "md/raid0:%s: zone %d\012"
drivers/md/raid0.c:128 [raid0]create_strip_zones =_ "md/raid0:%s: FINAL %d zones\012"
drivers/md/raid0.c:124 [raid0]create_strip_zones =_ "md/raid0:%s: %d zones\012"
drivers/md/raid0.c:121 [raid0]create_strip_zones =_ "md/raid0:%s:   ==> UNIQUE\012"
drivers/md/raid0.c:117 [raid0]create_strip_zones =_ "md/raid0:%s:   NOT EQUAL\012"
drivers/md/raid0.c:112 [raid0]create_strip_zones =_ "md/raid0:%s:   EQUAL\012"
drivers/md/raid0.c:103 [raid0]create_strip_zones =_ "md/raid0:%s:   END\012"
drivers/md/raid0.c:95 [raid0]create_strip_zones =_ "md/raid0:%s:   comparing %s(%llu) with %s(%llu)\012"
drivers/md/raid0.c:81 [raid0]create_strip_zones =_ "md/raid0:%s: looking at %s\012"
drivers/md/raid0.c:57 [raid0]dump_zones =_ "      zone-offset=%10lluKB, device-offset=%10lluKB, size=%10lluKB\012"
drivers/md/raid0.c:54 [raid0]dump_zones =_ "md: zone%d=[%s]\012"
drivers/md/raid0.c:43 [raid0]dump_zones =_ "md: RAID0 configuration for %s - %d zone%s\012"
drivers/thermal/intel/therm_throt.c:673 [therm_throt]intel_init_thermal =_ "CPU%d: Thermal monitoring handled by SMI\012"
drivers/thermal/thermal_helpers.c:213 [thermal_sys]__thermal_cdev_update =_ "set to state %lu\012"
drivers/thermal/thermal_helpers.c:202 [thermal_sys]__thermal_cdev_update =_ "zone%d->target=%lu\012"
drivers/thermal/thermal_helpers.c:163 [thermal_sys]thermal_zone_set_trips =_ "new temperature boundaries: %d < x < %d\012"
drivers/thermal/thermal_hwmon.c:230 [thermal_sys]thermal_remove_hwmon_sysfs =_ "temperature input lookup failed!\012"
drivers/thermal/thermal_hwmon.c:223 [thermal_sys]thermal_remove_hwmon_sysfs =_ "hwmon device lookup failed!\012"
drivers/thermal/gov_step_wise.c:146 [thermal_sys]thermal_zone_trip_update =_ "old_target=%d, target=%d\012"
drivers/thermal/gov_step_wise.c:135 [thermal_sys]thermal_zone_trip_update =_ "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\012"
drivers/thermal/gov_step_wise.c:51 [thermal_sys]get_target_state =_ "cur_state=%ld\012"
drivers/hwmon/hwmon.c:921 [hwmon]hwmon_device_unregister =_ "hwmon_device_unregister() failed: bad class ID!\012"
drivers/power/supply/power_supply_core.c:1089 [power_supply]__power_supply_register =_ "Not all required supplies found, defer probe\012"
drivers/power/supply/power_supply_core.c:952 [power_supply]power_supply_dev_release =_ "%s\012"
drivers/power/supply/power_supply_core.c:335 [power_supply]power_supply_am_i_supplied =_ "%s count %u err %d\012"
drivers/power/supply/power_supply_core.c:118 [power_supply]power_supply_changed =_ "%s\012"
drivers/power/supply/power_supply_core.c:82 [power_supply]power_supply_changed_work =_ "%s\012"
drivers/power/supply/power_supply_sysfs.c:460 [power_supply]power_supply_uevent =_ "No power supply yet\012"
drivers/power/supply/power_supply_sysfs.c:279 [power_supply]power_supply_show_property =_ "driver has no data for `%s' property\012"
drivers/power/supply/power_supply_leds.c:121 [power_supply]power_supply_update_gen_leds =_ "%s %d\012"
drivers/power/supply/power_supply_leds.c:30 [power_supply]power_supply_update_bat_leds =_ "%s %d\012"
drivers/pps/pps.c:404 [pps_core]pps_unregister_cdev =_ "unregistering pps%d\012"
drivers/pps/pps.c:387 [pps_core]pps_register_cdev =_ "source %s got cdev (%d:%d)\012"
drivers/pps/pps.c:351 [pps_core]pps_device_destruct =_ "deallocating pps%d\012"
drivers/pps/pps.c:262 [pps_core]pps_cdev_compat_ioctl =_ "PPS_FETCH\012"
drivers/pps/pps.c:209 [pps_core]pps_cdev_ioctl =_ "PPS_KC_BIND\012"
drivers/pps/pps.c:179 [pps_core]pps_cdev_ioctl =_ "PPS_FETCH\012"
drivers/pps/pps.c:168 [pps_core]pps_cdev_ioctl =_ "PPS_GETCAP\012"
drivers/pps/pps.c:147 [pps_core]pps_cdev_ioctl =_ "time format unspecified (%x)\012"
drivers/pps/pps.c:134 [pps_core]pps_cdev_ioctl =_ "unsupported capabilities (%x)\012"
drivers/pps/pps.c:127 [pps_core]pps_cdev_ioctl =_ "capture mode unspecified (%x)\012"
drivers/pps/pps.c:117 [pps_core]pps_cdev_ioctl =_ "PPS_SETPARAMS\012"
drivers/pps/pps.c:101 [pps_core]pps_cdev_ioctl =_ "PPS_GETPARAMS\012"
drivers/pps/pps.c:83 [pps_core]pps_cdev_pps_fetch =_ "pending signal caught\012"
drivers/pps/pps.c:65 [pps_core]pps_cdev_pps_fetch =_ "timeout %lld.%09d\012"
drivers/pps/kapi.c:205 [pps_core]pps_event =_ "capture clear seq #%u\012"
drivers/pps/kapi.c:191 [pps_core]pps_event =_ "capture assert seq #%u\012"
drivers/pps/kapi.c:169 [pps_core]pps_event =_ "PPS event at %lld.%09ld\012"
drivers/pps/kapi.c:115 [pps_core]pps_register_source =_ "new PPS source %s\012"
drivers/i2c/i2c-core-base.c:2654 [i2c_core]i2c_get_dma_safe_msg_buf =_ "using bounce buffer for addr=0x%02x, len=%d\012"
drivers/i2c/i2c-core-base.c:2646 [i2c_core]i2c_get_dma_safe_msg_buf =_ "DMA buffer for addr=0x%02x with length 0 is bogus\012"
drivers/i2c/i2c-core-base.c:2590 [i2c_core]i2c_new_scanned_device =_ "Probing failed, no device found\012"
drivers/i2c/i2c-core-base.c:2578 [i2c_core]i2c_new_scanned_device =_ "Address 0x%02x already in use, not probing\012"
drivers/i2c/i2c-core-base.c:2537 [i2c_core]i2c_detect =_ "found normal entry for adapter %d, addr 0x%02x\012"
drivers/i2c/i2c-core-base.c:2519 [i2c_core]i2c_detect =_ "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. If you need it, check 'Documentation/i2c/instantiating-devices.rst' for alternatives.\012"
drivers/i2c/i2c-core-base.c:2495 [i2c_core]i2c_detect_address =_ "Creating %s at 0x%02x\012"
drivers/i2c/i2c-core-base.c:2240 [i2c_core]__i2c_transfer =_ "I2C level transfers not supported\012"
drivers/i2c/i2c-core-base.c:2048 [i2c_core]i2c_del_driver =_ "driver [%s] unregistered\012"
drivers/i2c/i2c-core-base.c:2022 [i2c_core]i2c_register_driver =_ "driver [%s] registered\012"
drivers/i2c/i2c-core-base.c:1930 [i2c_core]i2c_parse_timing =_ "%s: %u\012"
drivers/i2c/i2c-core-base.c:1796 [i2c_core]i2c_del_adapter =_ "adapter [%s] unregistered\012"
drivers/i2c/i2c-core-base.c:1775 [i2c_core]i2c_del_adapter =_ "Removing %s at 0x%x\012"
drivers/i2c/i2c-core-base.c:1759 [i2c_core]i2c_del_adapter =_ "attempting to delete unregistered adapter [%s]\012"
drivers/i2c/i2c-core-base.c:1712 [i2c_core]i2c_do_del_adapter =_ "Removing %s at 0x%x\012"
drivers/i2c/i2c-core-base.c:1574 [i2c_core]i2c_register_adapter =_ "adapter [%s] registered\012"
drivers/i2c/i2c-core-base.c:1214 [i2c_core]i2c_new_ancillary_device =_ "Address for %s : 0x%x\012"
drivers/i2c/i2c-core-base.c:1018 [i2c_core]i2c_new_client_device =_ "client [%s] registered with bus id %s\012"
drivers/i2c/i2c-core-base.c:625 [i2c_core]i2c_device_remove =_ "remove\012"
drivers/i2c/i2c-core-base.c:560 [i2c_core]i2c_device_probe =_ "probe\012"
drivers/i2c/i2c-core-base.c:503 [i2c_core]i2c_device_probe =_ "Using Host Notify IRQ\012"
drivers/i2c/i2c-core-base.c:466 [i2c_core]i2c_init_recovery =_ "Not using recovery: %s\012"
drivers/i2c/i2c-core-base.c:333 [i2c_core]i2c_gpio_init_pinctrl_recovery =_ "no gpio or recovery state found for GPIO recovery\012"
drivers/i2c/i2c-core-base.c:323 [i2c_core]i2c_gpio_init_pinctrl_recovery =_ "default state not found for GPIO recovery\012"
drivers/i2c/i2c-core-base.c:298 [i2c_core]i2c_recover_bus =_ "Trying i2c bus recovery\012"
drivers/i2c/i2c-core-smbus.c:88 [i2c_core]i2c_smbus_check_pec =_ "Bad PEC 0x%02x vs. 0x%02x\012"
drivers/i2c/i2c-core-acpi.c:578 [i2c_core]acpi_gsb_i2c_read_bytes =_ "i2c read %d bytes from client@%#x starting at reg %#x failed, error: %d\012"
drivers/i2c/i2c-boardinfo.c:66 [i2c_boardinfo]i2c_register_board_info =_ "i2c-core: can't register boardinfo!\012"
drivers/rtc/rtc-cmos.c:1352 [rtc_cmos]cmos_resume =_ "resume, ctrl %02x\012"
drivers/rtc/rtc-cmos.c:1245 [rtc_cmos]cmos_suspend =_ "suspend%s, ctrl %02x\012"
drivers/rtc/rtc-cmos.c:1079 [rtc_cmos]cmos_do_probe =_ "IRQ %d is already in use\012"
drivers/rtc/rtc-cmos.c:950 [rtc_cmos]cmos_do_probe =_ "i/o registers already in use\012"
drivers/rtc/rtc-cmos.c:849 [rtc_cmos]acpi_cmos_wake_setup =_ "bogus FADT month_alarm (%d)\012"
drivers/rtc/class.c:413 [rtc_core]__devm_rtc_register_device =_ "char device (%d:%d)\012"
drivers/rtc/class.c:391 [rtc_core]__devm_rtc_register_device =_ "no ops set\012"
drivers/rtc/class.c:173 [rtc_core]rtc_resume =_ "%s:  time travel!\012"
drivers/rtc/class.c:165 [rtc_core]rtc_resume =_ "%s:  fail to read rtc time\012"
drivers/rtc/class.c:117 [rtc_core]rtc_suspend =_ "%s:  fail to read rtc time\012"
drivers/rtc/interface.c:364 [rtc_core]__rtc_read_alarm =_ "alarm rollover: %s\012"
drivers/rtc/interface.c:349 [rtc_core]__rtc_read_alarm =_ "alarm rollover: %s\012"
drivers/rtc/interface.c:338 [rtc_core]__rtc_read_alarm =_ "alarm rollover: %s\012"
drivers/rtc/interface.c:105 [rtc_core]__rtc_read_time =_ "read_time: rtc_time isn't valid\012"
drivers/rtc/interface.c:96 [rtc_core]__rtc_read_time =_ "read_time: fail to read: %d\012"
drivers/rtc/dev.c:481 [rtc_core]rtc_dev_prepare =_ "too many RTC devices\012"
drivers/input/mouse/synaptics.c:1457 [psmouse]synaptics_reconnect =_ "synaptics: reconnected after %d tries\012"
drivers/input/mouse/alps.c:3191 [psmouse]alps_detect =_ "alps: ALPS CS19 trackpoint-only device detected, ignoring\012"
drivers/input/mouse/alps.c:2938 [psmouse]alps_identify =_ "alps: Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\012"
drivers/input/mouse/alps.c:2319 [psmouse]alps_get_v3_v7_resolution =_ "alps: pitch %dx%d num-electrodes %dx%d physical size %dx%d mm res %dx%d\012"
drivers/input/mouse/alps.c:2182 [psmouse]alps_setup_trackstick_v3 =_ "alps: trackstick E7 report: %3ph\012"
drivers/input/mouse/alps.c:1816 [psmouse]alps_enter_command_mode =_ "alps: unknown response while entering command mode\012"
drivers/input/mouse/alps.c:1785 [psmouse]alps_rpt_cmd =_ "alps: %2.2X report: %3ph\012"
drivers/input/mouse/alps.c:1672 [psmouse]alps_process_byte =_ "alps: refusing packet[%i] = %x\012"
drivers/input/mouse/alps.c:1647 [psmouse]alps_process_byte =_ "alps: refusing packet[%i] = %x\012"
drivers/input/mouse/alps.c:1637 [psmouse]alps_process_byte =_ "alps: refusing packet[0] = %x (mask0 = %x, byte0 = %x)\012"
drivers/input/mouse/alps.c:1594 [psmouse]alps_flush_packet =_ "alps: refusing packet %3ph (suspected interleaved ps/2)\012"
drivers/input/mouse/alps.c:1530 [psmouse]alps_handle_interleaved_ps2 =_ "alps: refusing packet %4ph (suspected interleaved ps/2)\012"
drivers/input/mouse/alps.c:571 [psmouse]alps_process_trackstick_packet_v3 =_ "alps: Bad trackstick packet, discarding\012"
drivers/input/mouse/byd.c:454 [psmouse]byd_detect =_ "byd: BYD touchpad detected\012"
drivers/input/mouse/byd.c:413 [psmouse]byd_reconnect =_ "byd: Reconnected after %d attempts\012"
drivers/input/mouse/byd.c:402 [psmouse]byd_reconnect =_ "byd: Reconnect\012"
drivers/input/mouse/elantech.c:2035 [psmouse]elantech_use_host_notify =_ "elantech: Ignoring SMBus bus provider %d.\012"
drivers/input/mouse/elantech.c:2029 [psmouse]elantech_use_host_notify =_ "elantech: Ignoring SMBus provider through alert protocol.\012"
drivers/input/mouse/elantech.c:1445 [psmouse]elantech_detect =_ "elantech: Probably not a real Elantech touchpad. Aborting.\012"
drivers/input/mouse/elantech.c:1440 [psmouse]elantech_detect =_ "elantech: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\012"
drivers/input/mouse/elantech.c:1436 [psmouse]elantech_detect =_ "elantech: failed to query firmware version.\012"
drivers/input/mouse/elantech.c:1424 [psmouse]elantech_detect =_ "elantech: unexpected magic knock result 0x%02x, 0x%02x, 0x%02x.\012"
drivers/input/mouse/elantech.c:1414 [psmouse]elantech_detect =_ "elantech: sending Elantech magic knock failed.\012"
drivers/input/mouse/logips2pp.c:87 [psmouse]ps2pp_process_byte =_ "logips2pp: Received PS2++ packet #%x, but don't know how to handle.\012"
drivers/input/mouse/sentelic.c:271 [psmouse]fsp_page_reg_write =_ "sentelic: WRITE PAGE REG: to 0x%02x (rc = %d)\012"
drivers/input/mouse/sentelic.c:233 [psmouse]fsp_page_reg_read =_ "sentelic: READ PAGE REG: 0x%02x (rc = %d)\012"
drivers/input/mouse/sentelic.c:174 [psmouse]fsp_reg_write =_ "sentelic: WRITE REG: 0x%02x to 0x%02x (rc = %d)\012"
drivers/input/mouse/sentelic.c:122 [psmouse]fsp_reg_read =_ "sentelic: READ REG: 0x%02x is 0x%02x (rc = %d)\012"
drivers/input/mouse/cypress_ps2.c:243 [psmouse]cypress_read_fw_version =_ "cypress_ps2: cytp->tp_metrics_supported = %d\012"
drivers/input/mouse/cypress_ps2.c:242 [psmouse]cypress_read_fw_version =_ "cypress_ps2: cytp->fw_version = %d\012"
drivers/input/mouse/cypress_ps2.c:175 [psmouse]cypress_send_ext_cmd =_ "cypress_ps2: send extension cmd 0x%02x, [%d %d %d %d]\012"
drivers/input/mouse/cypress_ps2.c:165 [psmouse]cypress_verify_cmd_state =_ "cypress_ps2: verify cmd state failed.\012"
drivers/input/mouse/cypress_ps2.c:126 [psmouse]cypress_ps2_read_cmd_status =_ "cypress_ps2: Command 0x%02x response data (0x): %*ph\012"
drivers/input/mouse/cypress_ps2.c:43 [psmouse]cypress_ps2_sendbyte =_ "cypress_ps2: sending command 0x%02x failed, resp 0x%02x\012"
drivers/input/mouse/psmouse-smbus.c:177 [psmouse]psmouse_smbus_disconnect =_ "psmouse_smbus: posting removal request for SMBus companion %s\012"
drivers/input/mouse/psmouse-smbus.c:137 [psmouse]psmouse_smbus_remove_i2c_device =_ "destroying SMBus companion device\012"
drivers/input/mouse/psmouse-smbus.c:74 [psmouse]psmouse_smbus_detach_i2c_client =_ "psmouse_smbus: Marking SMBus companion %s as gone\012"
drivers/input/mouse/psmouse-smbus.c:52 [psmouse]psmouse_smbus_check_adapter =_ "psmouse_smbus: SMBus candidate adapter appeared, triggering rescan\012"
drivers/input/keyboard/atkbd.c:1362 [atkbd]atkbd_reconnect =_ "reconnect request, but serio is disconnected, ignoring...\012"
drivers/input/keyboard/atkbd.c:1256 [atkbd]atkbd_parse_fwnode_data =_ "FW reported %d function-row key locations\012"
drivers/input/keyboard/atkbd.c:1129 [atkbd]atkbd_set_keycode_table =_ "Using FW keymap\012"
drivers/input/keyboard/atkbd.c:486 [atkbd]atkbd_interrupt =_ "Keyboard on %s reports too many keys pressed.\012"
drivers/input/keyboard/atkbd.c:419 [atkbd]atkbd_interrupt =_ "Received %02x flags %02x\012"
drivers/input/input.c:2436 [input_core]input_register_device =_ "%s: registering %s with devres.\012"
drivers/input/input.c:2301 [input_core]devm_input_device_unregister =_ "%s: unregistering device %s\012"
drivers/input/input.c:2036 [input_core]devm_input_device_release =_ "%s: dropping reference to %s\012"
drivers/input/ff-core.c:243 [input_core]input_ff_flush =_ "flushing now\012"
drivers/input/ff-core.c:115 [input_core]input_ff_upload =_ "invalid or not supported wave form in upload\012"
drivers/input/ff-core.c:107 [input_core]input_ff_upload =_ "invalid or not supported effect type in upload\012"
drivers/input/serio/libps2.c:433 [libps2]ps2_handle_ack =_ "unexpected %#02x\012"
drivers/input/serio/libps2.c:366 [libps2]ps2_sliced_command =_ "%02x - %d\012"
drivers/input/serio/libps2.c:313 [libps2]__ps2_command =_ "%02x [%*ph] - %x/%08lx [%*ph]\012"
drivers/input/serio/libps2.c:93 [libps2]ps2_sendbyte =_ "%02x - %x\012"
drivers/input/serio/libps2.c:71 [libps2]ps2_do_sendbyte =_ "%02x - %d (%x), attempt %d\012"
drivers/input/serio/libps2.c:42 [libps2]ps2_do_sendbyte =_ "failed to write %#02x: %d\012"
drivers/usb/typec/ucsi/ucsi.c:857 [typec_ucsi]ucsi_connector_change =_ "Early connector change event\012"
drivers/usb/typec/ucsi/ucsi.c:764 [typec_ucsi]ucsi_handle_connector_change =_ "%s: Inferred changes that would have been lost: 0x%04x\012"
drivers/usb/typec/class.c:1443 [typec]vconn_source_store =_ "VCONN swapping not supported\012"
drivers/usb/typec/class.c:1438 [typec]vconn_source_store =_ "VCONN swap depends on USB Power Delivery\012"
drivers/usb/typec/class.c:1370 [typec]port_type_store =_ "changing port type not supported\012"
drivers/usb/typec/class.c:1331 [typec]power_role_store =_ "port type fixed at \042%s\042"
drivers/usb/typec/class.c:1321 [typec]power_role_store =_ "partner unable to swap power role\012"
drivers/usb/typec/class.c:1316 [typec]power_role_store =_ "power role swapping not supported\012"
drivers/usb/typec/class.c:1271 [typec]data_role_store =_ "data role swapping not supported\012"
drivers/usb/typec/class.c:1227 [typec]preferred_role_store =_ "Setting preferred role not supported\012"
drivers/usb/typec/class.c:1222 [typec]preferred_role_store =_ "Preferred role only supported with DRP ports\012"
drivers/usb/serial/usb-serial.c:1411 [usbserial]usb_serial_operations_init =_ "%s: using generic prepare_write_buffer\012"
drivers/usb/serial/usb-serial.c:1410 [usbserial]usb_serial_operations_init =_ "%s: using generic process_read_urb\012"
drivers/usb/serial/usb-serial.c:1409 [usbserial]usb_serial_operations_init =_ "%s: using generic write_bulk_callback\012"
drivers/usb/serial/usb-serial.c:1408 [usbserial]usb_serial_operations_init =_ "%s: using generic read_bulk_callback\012"
drivers/usb/serial/usb-serial.c:1407 [usbserial]usb_serial_operations_init =_ "%s: using generic wait_until_sent\012"
drivers/usb/serial/usb-serial.c:1405 [usbserial]usb_serial_operations_init =_ "%s: using generic chars_in_buffer\012"
drivers/usb/serial/usb-serial.c:1404 [usbserial]usb_serial_operations_init =_ "%s: using generic write_room\012"
drivers/usb/serial/usb-serial.c:1403 [usbserial]usb_serial_operations_init =_ "%s: using generic close\012"
drivers/usb/serial/usb-serial.c:1402 [usbserial]usb_serial_operations_init =_ "%s: using generic write\012"
drivers/usb/serial/usb-serial.c:1401 [usbserial]usb_serial_operations_init =_ "%s: using generic open\012"
drivers/usb/serial/usb-serial.c:1146 [usbserial]usb_serial_probe =_ "registering %s\012"
drivers/usb/serial/usb-serial.c:1115 [usbserial]usb_serial_probe =_ "The device claims to support interrupt out transfers, but write_int_callback is not defined\012"
drivers/usb/serial/usb-serial.c:1104 [usbserial]usb_serial_probe =_ "The device claims to support interrupt in transfers, but read_int_callback is not defined\012"
drivers/usb/serial/usb-serial.c:1059 [usbserial]usb_serial_probe =_ "setting up %d port structure(s)\012"
drivers/usb/serial/usb-serial.c:1001 [usbserial]usb_serial_probe =_ "sub driver rejected device\012"
drivers/usb/serial/usb-serial.c:976 [usbserial]usb_serial_probe =_ "none matched\012"
drivers/usb/serial/usb-serial.c:820 [usbserial]store_endpoint =_ "found interrupt out endpoint %02x\012"
drivers/usb/serial/usb-serial.c:815 [usbserial]store_endpoint =_ "found interrupt in endpoint %02x\012"
drivers/usb/serial/usb-serial.c:810 [usbserial]store_endpoint =_ "found bulk out endpoint %02x\012"
drivers/usb/serial/usb-serial.c:805 [usbserial]store_endpoint =_ "found bulk in endpoint %02x\012"
drivers/usb/serial/usb-serial.c:729 [usbserial]get_iface_id =_ "dynamic descriptor matches\012"
drivers/usb/serial/usb-serial.c:724 [usbserial]get_iface_id =_ "static descriptor matches\012"
drivers/usb/serial/usb-serial.c:663 [usbserial]usb_serial_port_release =_ "%s\012"
drivers/usb/serial/usb-serial.c:606 [usbserial]serial_get_icount =_ "%s\012"
drivers/usb/serial/usb-serial.c:594 [usbserial]serial_tiocmset =_ "%s\012"
drivers/usb/serial/usb-serial.c:582 [usbserial]serial_tiocmget =_ "%s\012"
drivers/usb/serial/usb-serial.c:535 [usbserial]serial_break =_ "%s\012"
drivers/usb/serial/usb-serial.c:523 [usbserial]serial_set_termios =_ "%s\012"
drivers/usb/serial/usb-serial.c:504 [usbserial]serial_ioctl =_ "%s - cmd 0x%04x\012"
drivers/usb/serial/usb-serial.c:431 [usbserial]serial_unthrottle =_ "%s\012"
drivers/usb/serial/usb-serial.c:421 [usbserial]serial_throttle =_ "%s\012"
drivers/usb/serial/usb-serial.c:406 [usbserial]serial_wait_until_sent =_ "%s\012"
drivers/usb/serial/usb-serial.c:393 [usbserial]serial_chars_in_buffer =_ "%s\012"
drivers/usb/serial/usb-serial.c:383 [usbserial]serial_write_room =_ "%s\012"
drivers/usb/serial/usb-serial.c:370 [usbserial]serial_write =_ "%s - %d byte(s)\012"
drivers/usb/serial/usb-serial.c:342 [usbserial]serial_cleanup =_ "%s\012"
drivers/usb/serial/usb-serial.c:322 [usbserial]serial_close =_ "%s\012"
drivers/usb/serial/usb-serial.c:313 [usbserial]serial_hangup =_ "%s\012"
drivers/usb/serial/usb-serial.c:284 [usbserial]serial_open =_ "%s\012"
drivers/usb/serial/usb-serial.c:90 [usbserial]allocate_minors =_ "%s %d\012"
drivers/usb/serial/generic.c:613 [usbserial]usb_serial_handle_dcd_change =_ "%s - status %d\012"
drivers/usb/serial/generic.c:456 [usbserial]usb_serial_generic_write_bulk_callback =_ "%s - urb stopped: %d\012"
drivers/usb/serial/generic.c:404 [usbserial]usb_serial_generic_read_bulk_callback =_ "%s - nonzero urb status: %d\012"
drivers/usb/serial/generic.c:394 [usbserial]usb_serial_generic_read_bulk_callback =_ "%s - urb stopped: %d\012"
drivers/usb/serial/generic.c:383 [usbserial]usb_serial_generic_read_bulk_callback =_ "%s - urb %d, len %d\012"
drivers/usb/serial/generic.c:308 [usbserial]usb_serial_generic_submit_read_urb =_ "%s - urb %d\012"
drivers/usb/serial/generic.c:286 [usbserial]usb_serial_generic_wait_until_sent =_ "%s - timeout = %u ms, period = %u ms\012"
drivers/usb/serial/generic.c:263 [usbserial]usb_serial_generic_chars_in_buffer =_ "%s - returns %u\012"
drivers/usb/serial/generic.c:246 [usbserial]usb_serial_generic_write_room =_ "%s - returns %u\012"
include/linux/usb/serial.h:393 [usbserial]usb_serial_debug_data =_ "%s - length = %d, data = %*ph\012"
drivers/usb/serial/console.c:291 [usbserial]usb_serial_console_init =_ "registering the USB serial console.\012"
drivers/usb/serial/console.c:238 [usbserial]usb_console_write =_ "%s - write cr: %d\012"
drivers/usb/serial/console.c:233 [usbserial]usb_console_write =_ "%s - write: %d\012"
drivers/usb/serial/console.c:215 [usbserial]usb_console_write =_ "%s - port not opened\012"
drivers/usb/serial/console.c:212 [usbserial]usb_console_write =_ "%s - %d byte(s)\012"
drivers/usb/host/xhci-pci.c:451 [xhci_pci]xhci_pci_setup =_ "Got SBRN %u\012"
drivers/usb/host/xhci-pci.c:413 [xhci_pci]xhci_find_lpm_incapable_ports =_ "port-%d disable U1/U2 _DSM: %d\012"
drivers/usb/host/xhci-pci.c:110 [xhci_pci]xhci_pci_reinit =_ "Finished xhci_pci_reinit\012"
drivers/usb/host/xhci-pci.c:108 [xhci_pci]xhci_pci_reinit =_ "MWI active\012"
drivers/usb/host/xhci.c:5446 [xhci_hcd]xhci_gen_setup =_ "Called HCD init\012"
drivers/usb/host/xhci.c:5441 [xhci_hcd]xhci_gen_setup =_ "Calling HCD init\012"
drivers/usb/host/xhci.c:5437 [xhci_hcd]xhci_gen_setup =_ "Enabling 32-bit DMA addresses.\012"
drivers/usb/host/xhci.c:5427 [xhci_hcd]xhci_gen_setup =_ "Enabling 64-bit DMA addresses.\012"
drivers/usb/host/xhci.c:5411 [xhci_hcd]xhci_gen_setup =_ "Reset complete\012"
drivers/usb/host/xhci.c:5406 [xhci_hcd]xhci_gen_setup =_ "Resetting HCD\012"
drivers/usb/host/xhci.c:5265 [xhci_hcd]xhci_update_hub_device =_ "Set up %s for hub device.\012"
drivers/usb/host/xhci.c:5258 [xhci_hcd]xhci_update_hub_device =_ "xHCI version %x doesn't need hub TT think time or number of ports\012"
drivers/usb/host/xhci.c:5240 [xhci_hcd]xhci_update_hub_device =_ "xHCI version %x needs hub TT think time and number of ports\012"
drivers/usb/host/xhci.c:5219 [xhci_hcd]xhci_update_hub_device =_ "Could not allocate xHCI TT structure.\012"
drivers/usb/host/xhci.c:5031 [xhci_hcd]xhci_calculate_lpm_timeout =_ "Hub-initiated %s disabled at request of driver %s\012"
drivers/usb/host/xhci.c:4965 [xhci_hcd]xhci_check_intel_tier_policy =_ "Plug device into first-tier hub to decrease power consumption.\012"
drivers/usb/host/xhci.c:4963 [xhci_hcd]xhci_check_intel_tier_policy =_ "Disabling U1 link state for device below second-tier hub.\012"
drivers/usb/host/xhci.c:4886 [xhci_hcd]xhci_calculate_u2_timeout =_ "Hub-initiated U2 disabled due to long timeout %llu ms\012"
drivers/usb/host/xhci.c:4869 [xhci_hcd]xhci_calculate_u2_timeout =_ "Disable U2, ESIT shorter than exit latency\012"
drivers/usb/host/xhci.c:4828 [xhci_hcd]xhci_calculate_u1_timeout =_ "Hub-initiated U1 disabled due to long timeout %llu ms\012"
drivers/usb/host/xhci.c:4805 [xhci_hcd]xhci_calculate_u1_timeout =_ "Disable U1, ESIT shorter than exit latency\012"
drivers/usb/host/xhci.c:4744 [xhci_hcd]xhci_get_timeout_no_hub_lpm =_ "Device-initiated %s disabled due to long PEL %llu ms\012"
drivers/usb/host/xhci.c:4740 [xhci_hcd]xhci_get_timeout_no_hub_lpm =_ "Device-initiated %s disabled due to long SEL %llu ms\012"
drivers/usb/host/xhci.c:4576 [xhci_hcd]xhci_set_usb2_hardware_lpm =_ "%s port %d USB2 hardware LPM\012"
drivers/usb/host/xhci.c:4249 [xhci_hcd]xhci_setup_device =_ "Slot already in default state\012"
drivers/usb/host/xhci.c:4126 [xhci_hcd]xhci_alloc_dev =_ "FIXME: allocate a command ring segment\012"
drivers/usb/host/xhci.c:3938 [xhci_hcd]xhci_discover_or_reset_device =_ "Successful reset device command.\012"
drivers/usb/host/xhci.c:3933 [xhci_hcd]xhci_discover_or_reset_device =_ "Not freeing device rings.\012"
drivers/usb/host/xhci.c:3930 [xhci_hcd]xhci_discover_or_reset_device =_ "Can't reset device (slot ID %u) in %s state\012"
drivers/usb/host/xhci.c:3907 [xhci_hcd]xhci_discover_or_reset_device =_ "FIXME: allocate a command ring segment\012"
drivers/usb/host/xhci.c:3898 [xhci_hcd]xhci_discover_or_reset_device =_ "Couldn't allocate command structure.\012"
drivers/usb/host/xhci.c:3889 [xhci_hcd]xhci_discover_or_reset_device =_ "Resetting device with slot ID %u\012"
drivers/usb/host/xhci.c:3871 [xhci_hcd]xhci_discover_or_reset_device =_ "The device to be reset with slot ID %u does not match the udev. Re-allocate the device\012"
drivers/usb/host/xhci.c:3854 [xhci_hcd]xhci_discover_or_reset_device =_ "The device to be reset with slot ID %u does not exist. Re-allocate the device\012"
drivers/usb/host/xhci.c:3666 [xhci_hcd]xhci_alloc_streams =_ "Slot %u ep ctx %u now has streams.\012"
drivers/usb/host/xhci.c:3615 [xhci_hcd]xhci_alloc_streams =_ "Need %u stream ctx entries for %u stream IDs.\012"
drivers/usb/host/xhci.c:3565 [xhci_hcd]xhci_alloc_streams =_ "xHCI controller does not support streams.\012"
drivers/usb/host/xhci.c:3559 [xhci_hcd]xhci_alloc_streams =_ "Driver wants %u stream IDs (including stream 0).\012"
drivers/usb/host/xhci.c:3465 [xhci_hcd]xhci_calculate_streams_and_bitmask =_ "Ep 0x%x only supports %u stream IDs.\012"
drivers/usb/host/xhci.c:3436 [xhci_hcd]xhci_calculate_streams_entries =_ "xHCI HW only supports %u stream ctx entries.\012"
drivers/usb/host/xhci.c:3362 [xhci_hcd]xhci_endpoint_reset =_ "%s: Failed to queue config ep command, %d "
drivers/usb/host/xhci.c:3331 [xhci_hcd]xhci_endpoint_reset =_ "%s: Failed to queue stop ep command, %d "
drivers/usb/host/xhci.c:3231 [xhci_hcd]xhci_endpoint_disable =_ "endpoint disable with ep_state 0x%x\012"
drivers/usb/host/xhci.c:3170 [xhci_hcd]xhci_reset_bandwidth =_ "%s called for udev %p\012"
drivers/usb/host/xhci.c:3078 [xhci_hcd]xhci_check_bandwidth =_ "%s called for udev %p\012"
drivers/usb/host/xhci.c:2116 [xhci_hcd]xhci_add_endpoint =_ "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\012"
drivers/usb/host/xhci.c:2094 [xhci_hcd]xhci_add_endpoint =_ "%s - could not initialize ep %#x\012"
drivers/usb/host/xhci.c:2053 [xhci_hcd]xhci_add_endpoint =_ "xHCI %s - can't add slot or ep 0 %#x\012"
drivers/usb/host/xhci.c:2002 [xhci_hcd]xhci_drop_endpoint =_ "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\012"
drivers/usb/host/xhci.c:1963 [xhci_hcd]xhci_drop_endpoint =_ "xHCI %s - can't drop slot or ep 0 %#x\012"
drivers/usb/host/xhci.c:1960 [xhci_hcd]xhci_drop_endpoint =_ "%s called for udev %p\012"
drivers/usb/host/xhci.c:1896 [xhci_hcd]xhci_urb_dequeue =_ "Invalidating TDs instantly on slot %d ep %d in state 0x%x\012"
drivers/usb/host/xhci.c:1888 [xhci_hcd]xhci_urb_dequeue =_ "Not queuing Stop Endpoint on slot %d ep %d in state 0x%x\012"
drivers/usb/host/xhci.c:1716 [xhci_hcd]xhci_urb_enqueue =_ "Ep 0x%x: URB %p submitted for non-responsive xHCI host.\012"
drivers/usb/host/xhci.c:1674 [xhci_hcd]xhci_urb_enqueue =_ "Can't queue urb, port error, link inactive\012"
drivers/usb/host/xhci.c:1553 [xhci_hcd]xhci_check_args =_ "xHCI %s called with udev and virt_dev does not match\012"
drivers/usb/host/xhci.c:1546 [xhci_hcd]xhci_check_args =_ "xHCI %s called with unaddressed device\012"
drivers/usb/host/xhci.c:1539 [xhci_hcd]xhci_check_args =_ "xHCI %s called for root hub\012"
drivers/usb/host/xhci.c:1535 [xhci_hcd]xhci_check_args =_ "xHCI %s called with invalid args\012"
drivers/usb/host/xhci.c:1424 [xhci_hcd]xhci_unmap_temp_buf =_ "Copy from tmp buf to urb sg list failed\012"
drivers/usb/host/xhci.c:1311 [xhci_hcd]xhci_resume =_ "%s: starting usb%d port polling.\012"
drivers/usb/host/xhci.c:1252 [xhci_hcd]xhci_resume =_ "Start the secondary HCD\012"
drivers/usb/host/xhci.c:1249 [xhci_hcd]xhci_resume =_ "Start the primary HCD\012"
drivers/usb/host/xhci.c:1243 [xhci_hcd]xhci_resume =_ "Initialize the xhci_hcd\012"
drivers/usb/host/xhci.c:1231 [xhci_hcd]xhci_resume =_ "xhci_stop completed - status = %x\012"
drivers/usb/host/xhci.c:1228 [xhci_hcd]xhci_resume =_ "cleaning up memory\012"
drivers/usb/host/xhci.c:1222 [xhci_hcd]xhci_resume =_ "// Disabling event ring interrupts\012"
drivers/usb/host/xhci.c:1213 [xhci_hcd]xhci_resume =_ "Stop HCD\012"
drivers/usb/host/xhci.c:1038 [xhci_hcd]xhci_suspend =_ "%s: stopping usb%d port polling.\012"
drivers/usb/host/xhci.c:965 [xhci_hcd]xhci_disable_hub_port_wake =_ "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\012"
drivers/usb/host/xhci.c:801 [xhci_hcd]xhci_shutdown =_ "%s: stopping usb%d port polling.\012"
drivers/usb/host/xhci-mem.c:2079 [xhci_hcd]xhci_add_in_port =_ "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\012"
drivers/usb/host/xhci-mem.c:1262 [xhci_hcd]xhci_microframes_to_exponent =_ "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\012"
drivers/usb/host/xhci-mem.c:1199 [xhci_hcd]xhci_setup_addressable_virt_dev =_ "udev->ttport = 0x%x\012"
drivers/usb/host/xhci-mem.c:1198 [xhci_hcd]xhci_setup_addressable_virt_dev =_ "udev->tt = %p\012"
drivers/usb/host/xhci-mem.c:1159 [xhci_hcd]xhci_setup_addressable_virt_dev =_ "Set fake root hub portnum to %d\012"
drivers/usb/host/xhci-mem.c:1158 [xhci_hcd]xhci_setup_addressable_virt_dev =_ "Set root hub portnum to %d\012"
drivers/usb/host/xhci-mem.c:1141 [xhci_hcd]xhci_setup_addressable_virt_dev =_ "FIXME xHCI doesn't support wireless speeds\012"
drivers/usb/host/xhci-mem.c:1025 [xhci_hcd]xhci_alloc_virt_device =_ "Set slot id %d dcbaa entry %p to 0x%llx\012"
drivers/usb/host/xhci-mem.c:1004 [xhci_hcd]xhci_alloc_virt_device =_ "Slot %d input ctx = 0x%llx (dma)\012"
drivers/usb/host/xhci-mem.c:996 [xhci_hcd]xhci_alloc_virt_device =_ "Slot %d output ctx = 0x%llx (dma)\012"
drivers/usb/host/xhci-mem.c:950 [xhci_hcd]xhci_free_virt_devices_depth_first =_ "Bad vdev->real_port.\012"
drivers/usb/host/xhci-mem.c:911 [xhci_hcd]xhci_free_virt_device =_ "Slot %u endpoint %u not removed from BW list!\012"
drivers/usb/host/xhci-mem.c:812 [xhci_hcd]xhci_free_tt_info =_ "Bad real port.\012"
drivers/usb/host/xhci-mem.c:677 [xhci_hcd]xhci_alloc_stream_info =_ "Setting stream %d ring ptr to 0x%08llx\012"
drivers/usb/host/xhci-mem.c:620 [xhci_hcd]xhci_alloc_stream_info =_ "Command ring has no reserved TRBs available\012"
drivers/usb/host/xhci-mem.c:616 [xhci_hcd]xhci_alloc_stream_info =_ "Allocating %u streams and %u stream context array entries.\012"
drivers/usb/host/xhci-ring.c:4489 [xhci_hcd]queue_command =_ "xHCI dying or halted, can't queue_command\012"
drivers/usb/host/xhci-ring.c:4225 [xhci_hcd]xhci_queue_isoc_tx =_ "Isoc URB with zero packets?\012"
drivers/usb/host/xhci-ring.c:4144 [xhci_hcd]xhci_get_isoc_frame_id =_ "%s: index %d, reg 0x%x start_frame_id 0x%x, end_frame_id 0x%x, start_frame 0x%x\012"
drivers/usb/host/xhci-ring.c:3738 [xhci_hcd]xhci_align_td =_ "Bounce align, new buff len %d\012"
drivers/usb/host/xhci-ring.c:3696 [xhci_hcd]xhci_align_td =_ "split align, new buff len %d\012"
drivers/usb/host/xhci-ring.c:3690 [xhci_hcd]xhci_align_td =_ "Unaligned %d bytes, buff len %d\012"
drivers/usb/host/xhci-ring.c:3598 [xhci_hcd]check_interval =_ "Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\012"
drivers/usb/host/xhci-ring.c:3475 [xhci_hcd]prepare_transfer =_ "Can't prepare ring for bad stream ID %u\012"
drivers/usb/host/xhci-ring.c:3386 [xhci_hcd]prepare_ring =_ "WARN halted endpoint, queueing URB anyway.\012"
drivers/usb/host/xhci-ring.c:3290 [xhci_hcd]xhci_irq =_ "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?\012"
drivers/usb/host/xhci-ring.c:3185 [xhci_hcd]xhci_handle_event =_ "xHCI host dying, returning from event handler.\012"
drivers/usb/host/xhci-ring.c:3051 [xhci_hcd]handle_tx_event =_ "Found td. Clear skip flag for slot %u ep %u.\012"
drivers/usb/host/xhci-ring.c:3023 [xhci_hcd]handle_tx_event =_ "Missing TD completion event after mid TD error\012"
drivers/usb/host/xhci-ring.c:2960 [xhci_hcd]handle_tx_event =_ "All tds on the ep_ring skipped. Clear skip flag for slot %u ep %u.\012"
drivers/usb/host/xhci-ring.c:2943 [xhci_hcd]handle_tx_event =_ "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\012"
drivers/usb/host/xhci-ring.c:2898 [xhci_hcd]handle_tx_event =_ "No Ping response error for slot %u ep %u, Skip one Isoc TD\012"
drivers/usb/host/xhci-ring.c:2892 [xhci_hcd]handle_tx_event =_ "Miss service interval error for slot %u ep %u, set skip flag\012"
drivers/usb/host/xhci-ring.c:2879 [xhci_hcd]handle_tx_event =_ "Overrun Event for slot %d ep %d still with TDs queued?\012"
drivers/usb/host/xhci-ring.c:2877 [xhci_hcd]handle_tx_event =_ "overrun event on endpoint\012"
drivers/usb/host/xhci-ring.c:2871 [xhci_hcd]handle_tx_event =_ "Underrun Event for slot %d ep %d still with TDs queued?\012"
drivers/usb/host/xhci-ring.c:2869 [xhci_hcd]handle_tx_event =_ "underrun event on endpoint\012"
drivers/usb/host/xhci-ring.c:2835 [xhci_hcd]handle_tx_event =_ "Babble error for slot %u ep %u on endpoint\012"
drivers/usb/host/xhci-ring.c:2830 [xhci_hcd]handle_tx_event =_ "Transfer error for slot %u ep %u on endpoint\012"
drivers/usb/host/xhci-ring.c:2825 [xhci_hcd]handle_tx_event =_ "Split transaction error for slot %u ep %u\012"
drivers/usb/host/xhci-ring.c:2820 [xhci_hcd]handle_tx_event =_ "Stalled endpoint for slot %u ep %u\012"
drivers/usb/host/xhci-ring.c:2814 [xhci_hcd]handle_tx_event =_ "Stopped with short packet transfer detected for slot %u ep %u\012"
drivers/usb/host/xhci-ring.c:2809 [xhci_hcd]handle_tx_event =_ "Stopped on No-op or Link TRB for slot %u ep %u\012"
drivers/usb/host/xhci-ring.c:2805 [xhci_hcd]handle_tx_event =_ "Stopped on Transfer TRB for slot %u ep %u\012"
drivers/usb/host/xhci-ring.c:2759 [xhci_hcd]handle_tx_event =_ "Stream transaction error ep %u no id\012"
drivers/usb/host/xhci-ring.c:2663 [xhci_hcd]process_bulk_intr_td =_ "ep %#x - asked for %d bytes, %d bytes untransferred\012"
drivers/usb/host/xhci-ring.c:2656 [xhci_hcd]process_bulk_intr_td =_ "ep %#x - asked for %d bytes, %d bytes untransferred\012"
drivers/usb/host/xhci-ring.c:2599 [xhci_hcd]process_isoc_td =_ "Error mid isoc TD, wait for final completion event\012"
drivers/usb/host/xhci-ring.c:2491 [xhci_hcd]process_ctrl_td =_ "Waiting for status stage event\012"
drivers/usb/host/xhci-ring.c:2467 [xhci_hcd]process_ctrl_td =_ "TRB error %u, halted endpoint index = %u\012"
drivers/usb/host/xhci-ring.c:2382 [xhci_hcd]finish_td =_ "Failed to count freed trbs at TD finish\012"
drivers/usb/host/xhci-ring.c:2342 [xhci_hcd]finish_td =_ "Already resolving halted ep for 0x%llx\012"
drivers/usb/host/xhci-ring.c:2295 [xhci_hcd]xhci_is_vendor_info_code =_ "Treating code as success.\012"
drivers/usb/host/xhci-ring.c:2293 [xhci_hcd]xhci_is_vendor_info_code =_ "Vendor defined info completion code %u\012"
drivers/usb/host/xhci-ring.c:2168 [xhci_hcd]handle_port_status =_ "%s: starting usb%d port polling.\012"
drivers/usb/host/xhci-ring.c:2110 [xhci_hcd]handle_port_status =_ "resume SS port %d finished\012"
drivers/usb/host/xhci-ring.c:2089 [xhci_hcd]handle_port_status =_ "resume HS port %d\012"
drivers/usb/host/xhci-ring.c:2074 [xhci_hcd]handle_port_status =_ "remote wake SS port %d\012"
drivers/usb/host/xhci-ring.c:2065 [xhci_hcd]handle_port_status =_ "port resume event for port %d\012"
drivers/usb/host/xhci-ring.c:2053 [xhci_hcd]handle_port_status =_ "resume root hub\012"
drivers/usb/host/xhci-ring.c:2047 [xhci_hcd]handle_port_status =_ "Port change event, %d-%d, id %d, portsc: 0x%x\012"
drivers/usb/host/xhci-ring.c:2037 [xhci_hcd]handle_port_status =_ "ignore port event for removed USB3 hcd\012"
drivers/usb/host/xhci-ring.c:1962 [xhci_hcd]handle_device_notification =_ "Device Wake Notification event for slot ID %u\012"
drivers/usb/host/xhci-ring.c:1944 [xhci_hcd]handle_vendor_event =_ "Vendor specific event TRB type = %u\012"
drivers/usb/host/xhci-ring.c:1796 [xhci_hcd]xhci_handle_command_timeout =_ "Command timeout on stopped ring\012"
drivers/usb/host/xhci-ring.c:1789 [xhci_hcd]xhci_handle_command_timeout =_ "host removed, ring start fail?\012"
drivers/usb/host/xhci-ring.c:1782 [xhci_hcd]xhci_handle_command_timeout =_ "Command timeout\012"
drivers/usb/host/xhci-ring.c:1714 [xhci_hcd]xhci_handle_cmd_reset_dev =_ "Completed reset device command.\012"
drivers/usb/host/xhci-ring.c:1592 [xhci_hcd]xhci_handle_cmd_reset_ep =_ "Note: Removed workaround to queue config ep for this hw"
drivers/usb/host/xhci-ring.c:1562 [xhci_hcd]xhci_handle_cmd_set_deq =_ "%s: All TDs cleared, ring doorbell\012"
drivers/usb/host/xhci-ring.c:1553 [xhci_hcd]xhci_handle_cmd_set_deq =_ "%s: Pending TDs to clear, continuing with invalidation\012"
drivers/usb/host/xhci-ring.c:1542 [xhci_hcd]xhci_handle_cmd_set_deq =_ "%s: Keep cancelled URB %p TD as cancel_status is %d\012"
drivers/usb/host/xhci-ring.c:1538 [xhci_hcd]xhci_handle_cmd_set_deq =_ "%s: Giveback cancelled URB %p TD\012"
drivers/usb/host/xhci-ring.c:1419 [xhci_hcd]update_ring_for_set_deq_completion =_ "Unable to find new dequeue pointer\012"
drivers/usb/host/xhci-ring.c:1354 [xhci_hcd]xhci_stop_endpoint_command_watchdog =_ "Stop EP timer raced with cmd completion, exit"
drivers/usb/host/xhci-ring.c:1191 [xhci_hcd]xhci_handle_cmd_stop_ep =_ "Stop ep completion ctx error, ctx_state %d\012"
drivers/usb/host/xhci-ring.c:1151 [xhci_hcd]xhci_handle_cmd_stop_ep =_ "Stop ep completion raced with stall, reset ep\012"
drivers/usb/host/xhci-ring.c:1011 [xhci_hcd]xhci_invalidate_cancelled_tds =_ "Move dq deferred: stream %u URB %p\012"
drivers/usb/host/xhci-ring.c:931 [xhci_hcd]xhci_handle_halted_endpoint =_ "Reset ep command for ep_index %d already pending\012"
drivers/usb/host/xhci-ring.c:894 [xhci_hcd]xhci_reset_halted_ep =_ "%s-reset ep %u, slot %u\012"
drivers/usb/host/xhci-ring.c:874 [xhci_hcd]xhci_giveback_invalidated_tds =_ "%s: Keep cancelled URB %p TD as cancel_status is %d\012"
drivers/usb/host/xhci-ring.c:870 [xhci_hcd]xhci_giveback_invalidated_tds =_ "%s: Giveback cancelled URB %p TD\012"
drivers/usb/host/xhci-ring.c:844 [xhci_hcd]xhci_td_cleanup =_ "Giveback URB %p, len = %d, expected = %d, status = %d\012"
drivers/usb/host/xhci-ring.c:626 [xhci_hcd]xhci_move_dequeue_past_td =_ "ep ring empty, Set new dequeue = enqueue"
drivers/usb/host/xhci-ring.c:441 [xhci_hcd]xhci_abort_cmd_ring =_ "No stop event for abort, ring start fail?\012"
drivers/usb/host/xhci-ring.c:397 [xhci_hcd]xhci_abort_cmd_ring =_ "Abort command ring\012"
drivers/usb/host/xhci-ring.c:366 [xhci_hcd]xhci_handle_stopped_cmd_ring =_ "Turn aborted command %p to no-op\012"
drivers/usb/host/xhci-ring.c:327 [xhci_hcd]xhci_ring_cmd_db =_ "// Ding dong!\012"
drivers/usb/host/xhci-hub.c:1901 [xhci_hcd]xhci_bus_resume =_ "reset stuck port %d-%d\012"
drivers/usb/host/xhci-hub.c:1766 [xhci_hcd]xhci_bus_suspend =_ "port %d-%d not suspended\012"
drivers/usb/host/xhci-hub.c:1763 [xhci_hcd]xhci_bus_suspend =_ "Bus suspend bailout, port connect change\012"
drivers/usb/host/xhci-hub.c:1755 [xhci_hcd]xhci_bus_suspend =_ "Bus suspend bailout, port over-current detected\012"
drivers/usb/host/xhci-hub.c:1747 [xhci_hcd]xhci_bus_suspend =_ "port %d-%d polling in bus suspend, waiting\012"
drivers/usb/host/xhci-hub.c:1719 [xhci_hcd]xhci_bus_suspend =_ "usb%d bus suspend to fail because a port is resuming\012"
drivers/usb/host/xhci-hub.c:1686 [xhci_hcd]xhci_hub_status_data =_ "%s: stopping usb%d port polling\012"
drivers/usb/host/xhci-hub.c:1571 [xhci_hcd]xhci_hub_control =_ "slot_id is zero\012"
drivers/usb/host/xhci-hub.c:1549 [xhci_hcd]xhci_hub_control =_ "PORTSC %04x\012"
drivers/usb/host/xhci-hub.c:1548 [xhci_hcd]xhci_hub_control =_ "clear USB_PORT_FEAT_SUSPEND\012"
drivers/usb/host/xhci-hub.c:1490 [xhci_hcd]xhci_hub_control =_ "set port remote wake mask, actual port %d-%d status  = 0x%x\012"
drivers/usb/host/xhci-hub.c:1484 [xhci_hcd]xhci_hub_control =_ "set port reset, actual port %d-%d status  = 0x%x\012"
drivers/usb/host/xhci-hub.c:1438 [xhci_hcd]xhci_hub_control =_ "missing U0 port change event for port %d-%d\012"
drivers/usb/host/xhci-hub.c:1389 [xhci_hcd]xhci_hub_control =_ "Enable compliance mode transition for port %d-%d\012"
drivers/usb/host/xhci-hub.c:1380 [xhci_hcd]xhci_hub_control =_ "CTC flag is 0, port already supports entering compliance mode\012"
drivers/usb/host/xhci-hub.c:1357 [xhci_hcd]xhci_hub_control =_ "Enable port %d-%d\012"
drivers/usb/host/xhci-hub.c:1340 [xhci_hcd]xhci_hub_control =_ "Disable port %d-%d\012"
drivers/usb/host/xhci-hub.c:1252 [xhci_hcd]xhci_hub_control =_ "Get port status %d-%d read: 0x%x, return 0x%x"
drivers/usb/host/xhci-hub.c:1217 [xhci_hcd]xhci_hub_control =_ "Wrong hub descriptor type for USB 3.0 roothub.\012"
drivers/usb/host/xhci-hub.c:973 [xhci_hcd]xhci_handle_usb2_port_link_resume =_ "slot_id is zero\012"
drivers/usb/host/xhci-hub.c:951 [xhci_hcd]xhci_handle_usb2_port_link_resume =_ "resume USB2 port %d-%d\012"
drivers/usb/host/xhci-hub.c:780 [xhci_hcd]xhci_set_link_state =_ "Set port %d-%d link state, portsc: 0x%x, write 0x%x"
drivers/usb/host/xhci-hub.c:743 [xhci_hcd]xhci_enter_test_mode =_ "Enter Test Mode: %d, Port_id=%d\012"
drivers/usb/host/xhci-hub.c:735 [xhci_hcd]xhci_enter_test_mode =_ "Stop controller\012"
drivers/usb/host/xhci-hub.c:727 [xhci_hcd]xhci_enter_test_mode =_ "Disable all port (PP = 0)\012"
drivers/usb/host/xhci-hub.c:713 [xhci_hcd]xhci_enter_test_mode =_ "Disable all slots\012"
drivers/usb/host/xhci-hub.c:667 [xhci_hcd]xhci_set_port_power =_ "set port power %d-%d %s, portsc: 0x%x\012"
drivers/usb/host/xhci-hub.c:637 [xhci_hcd]xhci_clear_port_change_bit =_ "clear port%d %s change, portsc: 0x%x\012"
drivers/usb/host/xhci-hub.c:586 [xhci_hcd]xhci_disable_port =_ "disable port %d-%d, portsc: 0x%x\012"
drivers/usb/host/xhci-hub.c:578 [xhci_hcd]xhci_disable_port =_ "Broken Port Enabled/Disabled, ignoring port disable request.\012"
drivers/usb/host/xhci-hub.c:572 [xhci_hcd]xhci_disable_port =_ "Ignoring request to disable SuperSpeed port.\012"
drivers/usb/host/xhci-dbg.c:31 [xhci_hcd]xhci_dbg_trace =_ "%pV\012"
drivers/usb/host/xhci-dbgcap.c:782 [xhci_hcd]dbc_handle_xfer_event =_ "Give back stalled req, but turn TRB to No-op\012"
drivers/usb/host/xhci-dbgcap.c:777 [xhci_hcd]dbc_handle_xfer_event =_ "Spurious stall event, keep req\012"
drivers/usb/host/xhci-dbgcap.c:775 [xhci_hcd]dbc_handle_xfer_event =_ "Ep stopped on Stalled TRB\012"
drivers/usb/host/uhci-pci.c:217 [uhci_hcd]uhci_pci_resume =_ "%s\012"
drivers/usb/host/uhci-pci.c:180 [uhci_hcd]uhci_pci_suspend =_ "%s\012"
drivers/usb/host/uhci-hcd.c:742 [uhci_hcd]uhci_rh_suspend =_ "suspend failed because a port is resuming\012"
drivers/usb/host/uhci-hcd.c:414 [uhci_hcd]wakeup_rh =_ "%s%s\012"
drivers/usb/host/uhci-hcd.c:297 [uhci_hcd]suspend_rh =_ "%s%s\012"
drivers/usb/host/uhci-hub.c:310 [uhci_hcd]uhci_hub_control =_ "port %d portsc %04x,%02x\012"
drivers/usb/host/uhci-q.c:1319 [uhci_hcd]uhci_submit_isochronous =_ "iso underrun %p (%u+%u < %u)\012"
drivers/usb/host/uhci-q.c:1195 [uhci_hcd]uhci_result_common =_ "%s: failed with status %x\012"
drivers/usb/host/uhci-q.c:715 [uhci_hcd]uhci_release_bandwidth =_ "%s dev %d ep%02x-%s, period %d, phase %d, %d us\012"
drivers/usb/host/uhci-q.c:682 [uhci_hcd]uhci_reserve_bandwidth =_ "%s dev %d ep%02x-%s, period %d, phase %d, %d us\012"
drivers/usb/host/uhci-q.c:648 [uhci_hcd]uhci_check_bandwidth =_ "bandwidth allocation failed: period %d, phase %d, %d + %d us\012"
drivers/usb/host/ohci-pci.c:192 [ohci_pci]ohci_quirk_qemu =_ "enabled qemu quirk\012"
drivers/usb/host/ohci-pci.c:161 [ohci_pci]ohci_quirk_amd700 =_ "enabled AMD prefetch quirk\012"
drivers/usb/host/ohci-pci.c:146 [ohci_pci]ohci_quirk_nec =_ "enabled NEC chipset lost interrupt quirk\012"
drivers/usb/host/ohci-pci.c:99 [ohci_pci]ohci_quirk_zfmicro =_ "enabled Compaq ZFMicro chipset quirks\012"
drivers/usb/host/ohci-pci.c:83 [ohci_pci]ohci_quirk_ns =_ "Using NSC SuperIO setup\012"
drivers/usb/host/ohci-pci.c:63 [ohci_pci]ohci_quirk_opti =_ "WARNING: OPTi workarounds unavailable\012"
drivers/usb/host/ohci-pci.c:49 [ohci_pci]ohci_quirk_amd756 =_ "AMD756 erratum 4 workaround\012"
drivers/usb/host/ohci-hcd.c:1290 [ohci_hcd]ohci_hcd_mod_init =_ "%s: block sizes: ed %zd td %zd\012"
drivers/usb/host/ohci-hcd.c:1168 [ohci_hcd]ohci_resume =_ "powerup ports\012"
drivers/usb/host/ohci-hcd.c:1097 [ohci_hcd]ohci_restart =_ "restart complete\012"
drivers/usb/host/ohci-hcd.c:1070 [ohci_hcd]ohci_restart =_ "bogus ed %p state %d\012"
drivers/usb/host/ohci-hcd.c:1052 [ohci_hcd]ohci_restart =_ "abort schedule...\012"
drivers/usb/host/ohci-hcd.c:952 [ohci_hcd]ohci_irq =_ "resume detect\012"
drivers/usb/host/ohci-hcd.c:930 [ohci_hcd]ohci_irq =_ "rhsc\012"
drivers/usb/host/ohci-hcd.c:896 [ohci_hcd]ohci_irq =_ "device removed!\012"
drivers/usb/host/ohci-hcd.c:791 [ohci_hcd]io_watchdog_func =_ "takeback pending TD for dev %d ep 0x%x\012"
drivers/usb/host/ohci-hcd.c:646 [ohci_hcd]ohci_run =_ "enabling initreset quirk\012"
drivers/usb/host/ohci-hcd.c:559 [ohci_hcd]ohci_run =_ "fminterval delta %d\012"
drivers/usb/host/ohci-hcd.c:479 [ohci_hcd]ohci_init =_ "USB HC TakeOver from BIOS/SMM\012"
drivers/usb/host/ohci-hcd.c:285 [ohci_hcd]ohci_urb_enqueue =_ "iso underrun %p (%u+%u < %u)\012"
drivers/usb/host/ohci-q.c:888 [ohci_hcd]ed_halted =_ "urb %p path %s ep%d%s %08x cc %d --> status %d\012"
drivers/usb/host/ohci-q.c:822 [ohci_hcd]td_done =_ "urb %p td %p (%d) cc %d, len=%d/%d\012"
drivers/usb/host/ohci-q.c:790 [ohci_hcd]td_done =_ "urb %p iso td %p (%d) len %d cc %d\012"
drivers/usb/host/ohci-q.c:291 [ohci_hcd]periodic_unlink =_ "unlink %sed %p branch %d [%dus.], interval %d\012"
drivers/usb/host/ohci-q.c:249 [ohci_hcd]ed_schedule =_ "ERR %d, interval %d msecs, load %d\012"
drivers/usb/host/ohci-q.c:147 [ohci_hcd]periodic_link =_ "link %sed %p branch %d [%dus.], interval %d\012"
drivers/usb/host/ohci-mem.c:121 [ohci_hcd]td_free =_ "no hash for td %p\012"
drivers/usb/host/ohci-dbg.c:776 [ohci_hcd]create_debug_files =_ "created debug files\012"
drivers/usb/host/ohci-dbg.c:247 [ohci_hcd]ohci_dump =_ "hcca frame #%04x\012"
drivers/usb/host/ohci-dbg.c:242 [ohci_hcd]ohci_dump =_ "OHCI controller state\012"
drivers/usb/host/ohci-dbg.c:236 [ohci_hcd]ohci_dump_roothub =_ "roothub.portstatus [%d] 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\012"
drivers/usb/host/ohci-dbg.c:222 [ohci_hcd]ohci_dump_roothub =_ "roothub.status %08x%s%s%s%s%s%s\012"
drivers/usb/host/ohci-dbg.c:215 [ohci_hcd]ohci_dump_roothub =_ "roothub.b %08x PPCM=%04x DR=%04x\012"
drivers/usb/host/ohci-dbg.c:204 [ohci_hcd]ohci_dump_roothub =_ "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\012"
drivers/usb/host/ohci-dbg.c:129 [ohci_hcd]ohci_dump_status =_ "cmdstatus 0x%05x SOC=%d%s%s%s%s\012"
drivers/usb/host/ohci-dbg.c:114 [ohci_hcd]ohci_dump_status =_ "control 0x%03x%s%s%s HCFS=%s%s%s%s%s CBSR=%d\012"
drivers/usb/host/ohci-dbg.c:107 [ohci_hcd]ohci_dump_status =_ "OHCI %d.%d, %s legacy support registers, rh state %s\012"
drivers/usb/host/ohci-dbg.c:72 [ohci_hcd]maybe_print_eds =_ "%s %08x\012"
drivers/usb/host/ohci-dbg.c:49 [ohci_hcd]ohci_dump_intr_mask =_ "%s 0x%08x%s%s%s%s%s%s%s%s%s\012"
drivers/usb/host/ohci-hub.c:754 [ohci_hcd]ohci_hub_control =_ "%s roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\012"
drivers/usb/host/ohci-hub.c:649 [ohci_hcd]root_port_reset =_ "port[%d] reset timeout, stat %08x\012"
drivers/usb/host/ohci-hub.c:289 [ohci_hcd]ohci_rh_resume =_ "restarting schedules ... %08x\012"
drivers/usb/host/ohci-hub.c:192 [ohci_hcd]ohci_rh_resume =_ "lost power\012"
drivers/usb/host/ohci-hub.c:188 [ohci_hcd]ohci_rh_resume =_ "snapshot resume? reinit\012"
drivers/usb/host/ohci-hub.c:183 [ohci_hcd]ohci_rh_resume =_ "%swakeup root hub\012"
drivers/usb/host/ohci-hub.c:178 [ohci_hcd]ohci_rh_resume =_ "%s root hub\012"
drivers/usb/host/ohci-hub.c:169 [ohci_hcd]ohci_rh_resume =_ "duplicate resume\012"
drivers/usb/host/ohci-hub.c:164 [ohci_hcd]ohci_rh_resume =_ "BIOS/SMM active, control %03x\012"
drivers/usb/host/ohci-hub.c:85 [ohci_hcd]ohci_rh_suspend =_ "stopping schedules ...\012"
drivers/usb/host/ohci-hub.c:72 [ohci_hcd]ohci_rh_suspend =_ "%s root hub\012"
drivers/usb/host/ohci-hub.c:68 [ohci_hcd]ohci_rh_suspend =_ "already suspended\012"
drivers/usb/host/ohci-hub.c:64 [ohci_hcd]ohci_rh_suspend =_ "needs reinit!\012"
drivers/usb/host/ohci-hub.c:56 [ohci_hcd]ohci_rh_suspend =_ "resume/suspend?\012"
drivers/usb/host/ehci-pci.c:287 [ehci_pci]ehci_pci_setup =_ "bogus port configuration: cc=%d x pcc=%d < ports=%d\012"
drivers/usb/host/ehci-pci.c:74 [ehci_pci]ehci_pci_reinit =_ "MWI active\012"
drivers/usb/host/ehci-hcd.c:1342 [ehci_hcd]ehci_hcd_init =_ "%s: block sizes: qh %zd qtd %zd itd %zd sitd %zd\012"
drivers/usb/host/ehci-hcd.c:834 [ehci_hcd]ehci_irq =_ "port %d remote wakeup\012"
drivers/usb/host/ehci-hcd.c:787 [ehci_hcd]ehci_irq =_ "IAA with IAAD still set?\012"
drivers/usb/host/ehci-hcd.c:728 [ehci_hcd]ehci_irq =_ "device removed\012"
drivers/usb/host/ehci-hcd.c:554 [ehci_hcd]ehci_init =_ "park %d\012"
drivers/usb/host/ehci-hcd.c:538 [ehci_hcd]ehci_init =_ "enable per-port change event\012"
drivers/usb/host/ehci-hcd.c:424 [ehci_hcd]ehci_stop =_ "stop\012"
drivers/usb/host/ehci-sched.c:2467 [ehci_hcd]scan_isoc =_ "corrupt type %d frame %d shadow %p\012"
drivers/usb/host/ehci-sched.c:2325 [ehci_hcd]sitd_submit =_ "can't init sitds\012"
drivers/usb/host/ehci-sched.c:2308 [ehci_hcd]sitd_submit =_ "can't change iso interval %d --> %d\012"
drivers/usb/host/ehci-sched.c:2304 [ehci_hcd]sitd_submit =_ "can't get iso stream\012"
drivers/usb/host/ehci-sched.c:1948 [ehci_hcd]itd_submit =_ "can't init itds\012"
drivers/usb/host/ehci-sched.c:1929 [ehci_hcd]itd_submit =_ "can't change iso interval %d --> %d\012"
drivers/usb/host/ehci-sched.c:1925 [ehci_hcd]itd_submit =_ "can't get iso stream\012"
drivers/usb/host/ehci-sched.c:1642 [ehci_hcd]iso_stream_schedule =_ "request %p would overflow (%u+%u >= %u)\012"
drivers/usb/host/ehci-sched.c:1615 [ehci_hcd]iso_stream_schedule =_ "iso underrun %p (%u+%u < %u) [%u]\012"
drivers/usb/host/ehci-sched.c:1586 [ehci_hcd]iso_stream_schedule =_ "request %p would overflow (%u-%u < %u mod %u)\012"
drivers/usb/host/ehci-sched.c:1532 [ehci_hcd]iso_stream_schedule =_ "iso sched full %p"
drivers/usb/host/ehci-sched.c:1150 [ehci_hcd]iso_stream_find =_ "dev %s ep%d%s, not iso??\012"
drivers/usb/host/ehci-sched.c:847 [ehci_hcd]qh_schedule =_ "reused qh %p schedule\012"
drivers/usb/host/ehci-sched.c:618 [ehci_hcd]qh_unlink_periodic =_ "unlink qh%d-%04x/%p start %d [%d/%d us]\012"
drivers/usb/host/ehci-sched.c:525 [ehci_hcd]qh_link_periodic =_ "link qh%d-%04x/%p start %d [%d/%d us]\012"
drivers/usb/host/ehci-sched.c:197 [ehci_hcd]bandwidth_dbg =_ "ep %02x: %s %s @ %u+%u (%u.%u+%u) [%u/%u us] mask %04x\012"
drivers/usb/host/ehci-q.c:932 [ehci_hcd]qh_make =_ "bogus dev %p speed %d\012"
drivers/usb/host/ehci-q.c:793 [ehci_hcd]qh_make =_ "bogus qh maxpacket %d\012"
drivers/usb/host/ehci-q.c:375 [ehci_hcd]qh_completions =_ "detected XactErr len %zu/%zu retry %d\012"
drivers/usb/host/ehci-q.c:354 [ehci_hcd]qh_completions =_ "detected DataBufferErr for urb %p ep%d%s len %d, qtd %p [qh %p]\012"
drivers/usb/host/ehci-q.c:237 [ehci_hcd]qtd_copy_status =_ "devpath %s ep%d%s 3strikes\012"
drivers/usb/host/ehci-q.c:168 [ehci_hcd]ehci_clear_tt_buffer =_ "clear tt buffer port %d, a%d ep%d t%08x\012"
drivers/usb/host/ehci-mem.c:222 [ehci_hcd]ehci_mem_init =_ "couldn't init memory\012"
drivers/usb/host/ehci-mem.c:88 [ehci_hcd]ehci_qh_alloc =_ "no dummy td\012"
drivers/usb/host/ehci-mem.c:58 [ehci_hcd]qh_destroy =_ "unused qh not empty!\012"
drivers/usb/host/ehci-hub.c:1102 [ehci_hcd]ehci_hub_control =_ "port %d low speed --> companion\012"
drivers/usb/host/ehci-hub.c:1073 [ehci_hcd]ehci_hub_control =_ "Port%d phy low pwr mode %s\012"
drivers/usb/host/ehci-hub.c:973 [ehci_hcd]ehci_hub_control =_ "port %d --> companion\012"
drivers/usb/host/ehci-hub.c:602 [ehci_hcd]check_reset_complete =_ "port %d reset complete, port enabled\012"
drivers/usb/host/ehci-hub.c:590 [ehci_hcd]check_reset_complete =_ "port %d full speed --> companion\012"
drivers/usb/host/ehci-hub.c:584 [ehci_hcd]check_reset_complete =_ "Failed to enable port %d on root hub TT\012"
drivers/usb/host/ehci-hub.c:432 [ehci_hcd]ehci_bus_resume =_ "Port status(0x%x) is wrong\012"
drivers/usb/host/ehci-hub.c:404 [ehci_hcd]ehci_bus_resume =_ "resume root hub%s\012"
drivers/usb/host/ehci-hub.c:325 [ehci_hcd]ehci_bus_suspend =_ "Port %d phy low-power mode %s\012"
drivers/usb/host/ehci-hub.c:241 [ehci_hcd]ehci_bus_suspend =_ "suspend failed because a port is resuming\012"
drivers/usb/host/ehci-hub.c:221 [ehci_hcd]ehci_bus_suspend =_ "suspend root hub\012"
drivers/usb/host/ehci-hub.c:114 [ehci_hcd]ehci_handover_companion_ports =_ "failed handover port %d: %x\012"
drivers/usb/host/ehci-timer.c:354 [ehci_hcd]ehci_iaa_watchdog =_ "IAA watchdog: status %x cmd %x\012"
drivers/usb/host/ehci-timer.c:159 [ehci_hcd]ehci_poll_PSS =_ "Waited too long for the periodic schedule status (%x/%x), giving up\012"
drivers/usb/host/ehci-timer.c:113 [ehci_hcd]ehci_poll_ASS =_ "Waited too long for the async schedule status (%x/%x), giving up\012"
drivers/usb/host/ehci-dbg.c:284 [ehci_hcd]dbg_port =_ "%s\012"
drivers/usb/host/ehci-dbg.c:275 [ehci_hcd]dbg_cmd =_ "%s\012"
drivers/usb/host/ehci-dbg.c:266 [ehci_hcd]dbg_status =_ "%s\012"
drivers/usb/host/ehci-dbg.c:63 [ehci_hcd]dbg_hcc_params =_ "%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\012"
drivers/usb/host/ehci-dbg.c:56 [ehci_hcd]dbg_hcc_params =_ "%s hcc_params %04x caching frame %s%s%s\012"
drivers/usb/host/ehci-dbg.c:42 [ehci_hcd]dbg_hcs_params =_ "%s portroute %s\012"
drivers/usb/host/ehci-dbg.c:19 [ehci_hcd]dbg_hcs_params =_ "%s hcs_params 0x%x dbg=%d%s cc=%d pcc=%d%s%s ports=%d\012"
drivers/usb/host/pci-quirks.c:1127 [pci_quirks]usb_enable_intel_xhci_ports =_ "USB 2.0 ports that are now switched over to xHCI: 0x%x\012"
drivers/usb/host/pci-quirks.c:1115 [pci_quirks]usb_enable_intel_xhci_ports =_ "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\012"
drivers/usb/host/pci-quirks.c:1104 [pci_quirks]usb_enable_intel_xhci_ports =_ "USB 3.0 ports that are now enabled under xHCI: 0x%x\012"
drivers/usb/host/pci-quirks.c:1092 [pci_quirks]usb_enable_intel_xhci_ports =_ "Configurable ports to enable SuperSpeed: 0x%x\012"
drivers/usb/host/pci-quirks.c:874 [pci_quirks]ehci_bios_handoff =_ "EHCI: BIOS handoff\012"
drivers/usb/host/pci-quirks.c:711 [pci_quirks]uhci_check_and_reset_hc =_ "Performing full reset\012"
drivers/usb/host/pci-quirks.c:704 [pci_quirks]uhci_check_and_reset_hc =_ "%s: intr = 0x%04x\012"
drivers/usb/host/pci-quirks.c:697 [pci_quirks]uhci_check_and_reset_hc =_ "%s: cmd = 0x%04x\012"
drivers/usb/host/pci-quirks.c:689 [pci_quirks]uhci_check_and_reset_hc =_ "%s: legsup = 0x%04x\012"
drivers/usb/host/pci-quirks.c:295 [pci_quirks]usb_hcd_amd_remote_wakeup_quirk =_ "QUIRK: Enable AMD remote wakeup fix\012"
drivers/usb/core/hub.c:6401 [usbcore]usb_hub_adjust_deviceremovable =_ "DeviceRemovable is changed to 1 according to platform information.\012"
drivers/usb/core/hub.c:6385 [usbcore]usb_hub_adjust_deviceremovable =_ "DeviceRemovable is changed to 1 according to platform information.\012"
drivers/usb/core/hub.c:6229 [usbcore]usb_reset_device =_ "%s for root hub!\012"
drivers/usb/core/hub.c:6222 [usbcore]usb_reset_device =_ "device reset not allowed in state %d\012"
drivers/usb/core/hub.c:6049 [usbcore]usb_reset_and_verify_device =_ "device reset not allowed in state %d\012"
drivers/usb/core/hub.c:5860 [usbcore]hub_event =_ "over-current change\012"
drivers/usb/core/hub.c:5848 [usbcore]hub_event =_ "power change\012"
drivers/usb/core/hub.c:5808 [usbcore]hub_event =_ "error resetting hub: %d\012"
drivers/usb/core/hub.c:5804 [usbcore]hub_event =_ "resetting for error %d\012"
drivers/usb/core/hub.c:5795 [usbcore]hub_event =_ "Can't autoresume: %d\012"
drivers/usb/core/hub.c:5773 [usbcore]hub_event =_ "state %d ports %d chg %04x evt %04x\012"
drivers/usb/core/hub.c:5736 [usbcore]port_event =_ "do warm reset\012"
drivers/usb/core/hub.c:5714 [usbcore]port_event =_ "link state change\012"
drivers/usb/core/hub.c:5709 [usbcore]port_event =_ "warm reset change\012"
drivers/usb/core/hub.c:5704 [usbcore]port_event =_ "reset change\012"
drivers/usb/core/hub.c:5692 [usbcore]port_event =_ "over-current change #%u\012"
drivers/usb/core/hub.c:5671 [usbcore]port_event =_ "enable change, status %08x\012"
drivers/usb/core/hub.c:5579 [usbcore]hub_port_connect_change =_ "device descriptor has changed\012"
drivers/usb/core/hub.c:5573 [usbcore]hub_port_connect_change =_ "can't read device descriptor %ld\012"
drivers/usb/core/hub.c:5546 [usbcore]hub_port_connect_change =_ "status %04x, change %04x, %s\012"
drivers/usb/core/hub.c:5486 [usbcore]hub_port_connect =_ "%dmA power budget left\012"
drivers/usb/core/hub.c:5420 [usbcore]hub_port_connect =_ "get status %d ?\012"
drivers/usb/core/hub.c:5285 [usbcore]descriptors_changed =_ "serial string changed\012"
drivers/usb/core/hub.c:5281 [usbcore]descriptors_changed =_ "serial string error %d\012"
drivers/usb/core/hub.c:5268 [usbcore]descriptors_changed =_ "config index %d changed (#%d)\012"
drivers/usb/core/hub.c:5261 [usbcore]descriptors_changed =_ "config index %d, error %d\012"
drivers/usb/core/hub.c:5070 [usbcore]hub_port_init =_ "ep0 maxpacket = %d\012"
drivers/usb/core/hub.c:5039 [usbcore]hub_port_init =_ "Failed set isoch delay, error %d\012"
drivers/usb/core/hub.c:4960 [usbcore]hub_port_init =_ "device reset changed speed!\012"
drivers/usb/core/hub.c:4848 [usbcore]hub_port_init =_ "device reset changed speed!\012"
drivers/usb/core/hub.c:4633 [usbcore]hub_port_debounce =_ "debounce total %dms stable %dms status 0x%x\012"
drivers/usb/core/hub.c:4093 [usbcore]usb_set_device_initiated_lpm =_ "%s: Can't %s %s state for unconfigured device.\012"
drivers/usb/core/hub.c:4024 [usbcore]usb_req_set_sel =_ "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\012"
drivers/usb/core/hub.c:3953 [usbcore]hub_reset_resume =_ "%s\012"
drivers/usb/core/hub.c:3936 [usbcore]hub_resume =_ "%s\012"
drivers/usb/core/hub.c:3891 [usbcore]hub_suspend =_ "%s\012"
drivers/usb/core/hub.c:3825 [usbcore]hub_handle_remote_wakeup =_ "resume, status %d\012"
drivers/usb/core/hub.c:3774 [usbcore]usb_remote_wakeup =_ "usb %sresume\012"
drivers/usb/core/hub.c:3753 [usbcore]usb_port_resume =_ "can't resume, status %d\012"
drivers/usb/core/hub.c:3716 [usbcore]usb_port_resume =_ "usb %sresume\012"
drivers/usb/core/hub.c:3713 [usbcore]usb_port_resume =_ "can't resume, status %d\012"
drivers/usb/core/hub.c:3690 [usbcore]usb_port_resume =_ "can't resume usb port, status %d\012"
drivers/usb/core/hub.c:3641 [usbcore]wait_for_connected =_ "Waited %dms for CONNECT\012"
drivers/usb/core/hub.c:3592 [usbcore]finish_port_resume =_ "disable remote wakeup, status %d\012"
drivers/usb/core/hub.c:3571 [usbcore]finish_port_resume =_ "gone after usb resume? status %d\012"
drivers/usb/core/hub.c:3564 [usbcore]finish_port_resume =_ "retry with reset-resume\012"
drivers/usb/core/hub.c:3523 [usbcore]finish_port_resume =_ "%s\012"
drivers/usb/core/hub.c:3484 [usbcore]usb_port_suspend =_ "usb %ssuspend, wakeup %d\012"
drivers/usb/core/hub.c:3467 [usbcore]usb_port_suspend =_ "can't suspend, status %d\012"
drivers/usb/core/hub.c:3458 [usbcore]usb_port_suspend =_ "suspend timeout, status %04x\012"
drivers/usb/core/hub.c:3406 [usbcore]usb_port_suspend =_ "won't remote wakeup, status %d\012"
drivers/usb/core/hub.c:3210 [usbcore]check_port_resume_type =_ "status %04x.%04x after resume, %d\012"
drivers/usb/core/hub.c:3073 [usbcore]hub_port_reset =_ "not enabled, trying %sreset again...\012"
drivers/usb/core/hub.c:3067 [usbcore]hub_port_reset =_ "hot reset failed, warm reset\012"
drivers/usb/core/hub.c:3028 [usbcore]hub_port_reset =_ "port_wait_reset: err = %d\012"
drivers/usb/core/hub.c:2925 [usbcore]hub_port_wait_reset =_ "not %sreset yet, waiting %dms\012"
drivers/usb/core/hub.c:2577 [usbcore]usb_new_device =_ "udev %d, busnum %d, minor = %d\012"
drivers/usb/core/hub.c:2258 [usbcore]usb_disconnect =_ "unregistering device\012"
drivers/usb/core/hub.c:1638 [usbcore]hub_configure =_ "%sover-current condition exists\012"
drivers/usb/core/hub.c:1633 [usbcore]hub_configure =_ "local power source is %s\012"
drivers/usb/core/hub.c:1622 [usbcore]hub_configure =_ "%umA bus power budget for each child\012"
drivers/usb/core/hub.c:1606 [usbcore]hub_configure =_ "hub controller current requirement: %dmA\012"
drivers/usb/core/hub.c:1579 [usbcore]hub_configure =_ "power on to power good time: %dms\012"
drivers/usb/core/hub.c:1576 [usbcore]hub_configure =_ "Port indicators are supported\012"
drivers/usb/core/hub.c:1567 [usbcore]hub_configure =_ "TT requires at most %d FS bit times (%d ns)\012"
drivers/usb/core/hub.c:1561 [usbcore]hub_configure =_ "TT requires at most %d FS bit times (%d ns)\012"
drivers/usb/core/hub.c:1555 [usbcore]hub_configure =_ "TT requires at most %d FS bit times (%d ns)\012"
drivers/usb/core/hub.c:1548 [usbcore]hub_configure =_ "TT requires at most %d FS bit times (%d ns)\012"
drivers/usb/core/hub.c:1538 [usbcore]hub_configure =_ "Unrecognized hub protocol %d\012"
drivers/usb/core/hub.c:1527 [usbcore]hub_configure =_ "TT per port\012"
drivers/usb/core/hub.c:1521 [usbcore]hub_configure =_ "Single TT\012"
drivers/usb/core/hub.c:1510 [usbcore]hub_configure =_ "no over-current protection\012"
drivers/usb/core/hub.c:1506 [usbcore]hub_configure =_ "individual port over-current protection\012"
drivers/usb/core/hub.c:1503 [usbcore]hub_configure =_ "global over-current protection\012"
drivers/usb/core/hub.c:1497 [usbcore]hub_configure =_ "no power switching (usb 1.0)\012"
drivers/usb/core/hub.c:1493 [usbcore]hub_configure =_ "individual port power switching\012"
drivers/usb/core/hub.c:1490 [usbcore]hub_configure =_ "ganged power switching\012"
drivers/usb/core/hub.c:1486 [usbcore]hub_configure =_ "standalone hub\012"
drivers/usb/core/hub.c:1484 [usbcore]hub_configure =_ "compound device; port removable status: %s\012"
drivers/usb/core/hub.c:1144 [usbcore]hub_activate =_ "status %04x change %04x\012"
drivers/usb/core/hub.c:977 [usbcore]hub_port_logical_disconnect =_ "logical disconnect\012"
drivers/usb/core/hub.c:930 [usbcore]hub_power_on =_ "trying to enable port power on non-switchable hub\012"
drivers/usb/core/hub.c:928 [usbcore]hub_power_on =_ "enabling power on all ports\012"
drivers/usb/core/hub.c:743 [usbcore]hub_irq =_ "transfer --> %d\012"
drivers/usb/core/hub.c:481 [usbcore]set_port_led =_ "indicator %s status %d\012"
drivers/usb/core/hcd.c:3054 [usbcore]usb_remove_hcd =_ "roothub graceful disconnect\012"
drivers/usb/core/hcd.c:2965 [usbcore]usb_add_hcd =_ "supports USB remote wakeup\012"
drivers/usb/core/hcd.c:2883 [usbcore]usb_add_hcd =_ "pool alloc failed\012"
drivers/usb/core/hcd.c:2600 [usbcore]__usb_create_hcd =_ "hcd bandwidth mutex alloc failed\012"
drivers/usb/core/hcd.c:2591 [usbcore]__usb_create_hcd =_ "hcd address0 mutex alloc failed\012"
drivers/usb/core/hcd.c:2389 [usbcore]hcd_bus_resume =_ "bus %s fail, err %d\012"
drivers/usb/core/hcd.c:2337 [usbcore]hcd_bus_resume =_ "skipped %s of dead bus\012"
drivers/usb/core/hcd.c:2334 [usbcore]hcd_bus_resume =_ "usb %sresume\012"
drivers/usb/core/hcd.c:2322 [usbcore]hcd_bus_suspend =_ "bus %s fail, err %d\012"
drivers/usb/core/hcd.c:2310 [usbcore]hcd_bus_suspend =_ "suspend raced with wakeup event\012"
drivers/usb/core/hcd.c:2285 [usbcore]hcd_bus_suspend =_ "skipped %s of dead bus\012"
drivers/usb/core/hcd.c:2281 [usbcore]hcd_bus_suspend =_ "bus %ssuspend, wakeup %d\012"
drivers/usb/core/hcd.c:1811 [usbcore]usb_hcd_flush_endpoint =_ "shutdown urb %pK ep%d%s-%s\012"
drivers/usb/core/hcd.c:1638 [usbcore]usb_hcd_unlink_urb =_ "hcd_unlink_urb %pK fail %d\012"
drivers/usb/core/hcd.c:1127 [usbcore]usb_calc_bus_time =_ "%s: bogus device speed!\012"
drivers/usb/core/hcd.c:1015 [usbcore]register_root_hub =_ "can't read %s bos descriptor %d\012"
drivers/usb/core/hcd.c:1002 [usbcore]register_root_hub =_ "can't read %s device descriptor %d\012"
drivers/usb/core/hcd.c:820 [usbcore]rh_queue_status =_ "not queuing rh status urb\012"
drivers/usb/core/hcd.c:699 [usbcore]rh_call_control =_ "CTRL: TypeReq=0x%x val=0x%x idx=0x%x len=%d ==> %d\012"
drivers/usb/core/hcd.c:657 [usbcore]rh_call_control =_ "no endpoint features yet\012"
drivers/usb/core/hcd.c:641 [usbcore]rh_call_control =_ "root hub device address %d\012"
drivers/usb/core/urb.c:436 [usbcore]usb_submit_urb =_ "bogus endpoint ep%d%s in %s (bad maxpacket %d)\012"
drivers/usb/core/urb.c:414 [usbcore]usb_submit_urb =_ "BOGUS control len %d doesn't match transfer length %d\012"
drivers/usb/core/message.c:2401 [usbcore]cdc_parse_cdc_header =_ "Ignoring descriptor: type %02x, length %ud\012"
drivers/usb/core/message.c:2160 [usbcore]usb_set_configuration =_ "adding %s (config #%d, interface %d)\012"
drivers/usb/core/message.c:1594 [usbcore]usb_set_interface =_ "manual set_interface for iface %d, alt %d\012"
drivers/usb/core/message.c:1536 [usbcore]usb_set_interface =_ "selecting invalid interface %d\012"
drivers/usb/core/message.c:1434 [usbcore]usb_disable_device =_ "%s nuking %s URBs\012"
drivers/usb/core/message.c:1411 [usbcore]usb_disable_device =_ "unregistering interface %s\012"
drivers/usb/core/message.c:997 [usbcore]usb_string =_ "wrong descriptor type %02x for string %d (\042%s\042)\012"
drivers/usb/core/message.c:944 [usbcore]usb_get_langid =_ "default language 0x%04x\012"
drivers/usb/core/message.c:689 [usbcore]usb_sg_wait =_ "%s, submit --> %d\012"
drivers/usb/core/message.c:67 [usbcore]usb_start_wait_urb =_ "%s timed out on ep%d%s len=%u/%u\012"
drivers/usb/core/driver.c:1930 [usbcore]autosuspend_check =_ "HCD doesn't handle wakeup requests\012"
drivers/usb/core/driver.c:1919 [usbcore]autosuspend_check =_ "remote wakeup needed for autosuspend\012"
drivers/usb/core/driver.c:1354 [usbcore]usb_resume_interface =_ "no reset_resume for driver %s?\012"
drivers/usb/core/driver.c:1116 [usbcore]usb_forced_unbind_intf =_ "forced unbind\012"
drivers/usb/core/driver.c:921 [usbcore]usb_uevent =_ "usb %s: bus removed?\012"
drivers/usb/core/driver.c:917 [usbcore]usb_uevent =_ "usb %s: already deleted?\012"
drivers/usb/core/driver.c:349 [usbcore]usb_probe_interface =_ "%s - got id\012"
drivers/usb/core/driver.c:327 [usbcore]usb_probe_interface =_ "%s\012"
drivers/usb/core/driver.c:255 [usbcore]usb_probe_device =_ "%s\012"
drivers/usb/core/config.c:800 [usbcore]usb_parse_configuration =_ "skipped %d descriptor%s after %s\012"
drivers/usb/core/config.c:565 [usbcore]usb_parse_interface =_ "skipped %d descriptor%s after %s\012"
drivers/usb/core/config.c:486 [usbcore]usb_parse_endpoint =_ "skipped %d descriptor%s after %s\012"
drivers/usb/core/file.c:236 [usbcore]usb_deregister_dev =_ "removing %d minor\012"
drivers/usb/core/file.c:185 [usbcore]usb_register_dev =_ "looking for a minor, starting at %d\012"
drivers/usb/core/sysfs.c:1257 [usbcore]usb_create_sysfs_intf_files =_ "interface string descriptor file not created\012"
drivers/usb/core/devio.c:2477 [usbcore]proc_disconnect_claim =_ "disconnect by usbfs\012"
drivers/usb/core/devio.c:2345 [usbcore]proc_ioctl =_ "disconnect by usbfs\012"
drivers/usb/core/generic.c:185 [usbcore]usb_choose_configuration =_ "configuration #%d chosen from %d choice%s\012"
drivers/usb/core/quirks.c:746 [usbcore]usb_detect_interface_quirks =_ "USB interface quirks for this device: %x\012"
drivers/usb/core/quirks.c:725 [usbcore]usb_detect_quirks =_ "USB quirks for this device: %x\012"
drivers/usb/core/port.c:401 [usbcore]link_peers_report =_ "failed to peer to %s (%d)\012"
drivers/usb/core/port.c:399 [usbcore]link_peers_report =_ "peered to %s\012"
drivers/usb/core/port.c:342 [usbcore]link_peers =_ "usb: failed to peer %s and %s by %s (%s:%s) (%s:%s)\012"
drivers/usb/core/port.c:233 [usbcore]usb_port_runtime_resume =_ "reconnect timeout\012"
drivers/usb/core/hcd-pci.c:610 [usbcore]hcd_pci_runtime_resume =_ "hcd_pci_runtime_resume: %d\012"
drivers/usb/core/hcd-pci.c:600 [usbcore]hcd_pci_runtime_suspend =_ "hcd_pci_runtime_suspend: %d\012"
drivers/usb/core/hcd-pci.c:556 [usbcore]hcd_pci_suspend_noirq =_ "--> PCI %s\012"
drivers/usb/core/hcd-pci.c:553 [usbcore]hcd_pci_suspend_noirq =_ "--> PCI D0 legacy\012"
drivers/usb/core/hcd-pci.c:546 [usbcore]hcd_pci_suspend_noirq =_ "wakeup: %d\012"
drivers/usb/core/hcd-pci.c:488 [usbcore]resume_common =_ "can't resume, not suspended!\012"
drivers/usb/core/hcd-pci.c:252 [usbcore]usb_hcd_pci_probe =_ "no i/o regions available\012"
drivers/usb/core/hcd-pci.c:231 [usbcore]usb_hcd_pci_probe =_ "error mapping memory\012"
drivers/usb/core/hcd-pci.c:224 [usbcore]usb_hcd_pci_probe =_ "controller already in use\012"
drivers/usb/core/hcd-pci.c:127 [usbcore]non_ehci_add =_ "FS/LS companion for %s\012"
drivers/usb/core/hcd-pci.c:109 [usbcore]ehci_post_add =_ "HS companion for %s\012"
drivers/usb/core/usb-acpi.c:143 [usbcore]usb_acpi_set_power_state =_ "acpi: power failed to be set\012"
drivers/usb/core/usb-acpi.c:141 [usbcore]usb_acpi_set_power_state =_ "acpi: power was set to %d\012"
drivers/usb/core/usb-acpi.c:91 [usbcore]usb_acpi_port_lpm_incapable =_ "evaluate port-%d _DSM failed\012"
drivers/usb/core/usb-acpi.c:79 [usbcore]usb_acpi_port_lpm_incapable =_ "port-%d no _DSM function %d\012"
drivers/usb/core/usb-acpi.c:73 [usbcore]usb_acpi_port_lpm_incapable =_ "port-%d no acpi handle\012"
drivers/pcmcia/cs.c:792 [pcmcia_core]pcmcia_reset_card =_ "can't reset, is cardbus\012"
drivers/pcmcia/cs.c:787 [pcmcia_core]pcmcia_reset_card =_ "can't reset, suspended\012"
drivers/pcmcia/cs.c:782 [pcmcia_core]pcmcia_reset_card =_ "can't reset, not present\012"
drivers/pcmcia/cs.c:777 [pcmcia_core]pcmcia_reset_card =_ "resetting socket\012"
drivers/pcmcia/cs.c:727 [pcmcia_core]pcmcia_parse_uevents =_ "parse_uevents: events %08x\012"
drivers/pcmcia/cs.c:702 [pcmcia_core]pcmcia_parse_events =_ "parse_events: events %08x\012"
drivers/pcmcia/cs.c:504 [pcmcia_core]socket_late_resume =_ "suspend state 0x%x != resume state 0x%x\012"
drivers/pcmcia/cs.c:437 [pcmcia_core]socket_insert =_ "insert done\012"
drivers/pcmcia/cs.c:414 [pcmcia_core]socket_insert =_ "insert\012"
drivers/pcmcia/cs.c:336 [pcmcia_core]socket_setup =_ "setup\012"
drivers/pcmcia/cs.c:289 [pcmcia_core]socket_shutdown =_ "shutdown\012"
drivers/pcmcia/cs.c:253 [pcmcia_core]socket_reset =_ "reset\012"
drivers/pcmcia/cs.c:211 [pcmcia_core]pcmcia_unregister_socket =_ "pcmcia_unregister_socket(0x%p)\012"
drivers/pcmcia/cs.c:111 [pcmcia_core]pcmcia_register_socket =_ "pcmcia_register_socket(0x%p)\012"
drivers/net/ethernet/intel/e1000e/82571.c:1657 [e1000e]e1000_valid_led_default_82571 =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/82571.c:1635 [e1000e]e1000_check_for_serdes_link_82571 =_ "ANYSTATE  -> AN_PROG\012"
drivers/net/ethernet/intel/e1000e/82571.c:1623 [e1000e]e1000_check_for_serdes_link_82571 =_ "ANYSTATE  -> DOWN\012"
drivers/net/ethernet/intel/e1000e/82571.c:1606 [e1000e]e1000_check_for_serdes_link_82571 =_ "ANYSTATE  -> DOWN\012"
drivers/net/ethernet/intel/e1000e/82571.c:1599 [e1000e]e1000_check_for_serdes_link_82571 =_ "DOWN      -> AN_PROG\012"
drivers/net/ethernet/intel/e1000e/82571.c:1584 [e1000e]e1000_check_for_serdes_link_82571 =_ "AN_PROG   -> FORCED_UP\012"
drivers/net/ethernet/intel/e1000e/82571.c:1578 [e1000e]e1000_check_for_serdes_link_82571 =_ "Error config flow control\012"
drivers/net/ethernet/intel/e1000e/82571.c:1564 [e1000e]e1000_check_for_serdes_link_82571 =_ "AN_PROG   -> DOWN\012"
drivers/net/ethernet/intel/e1000e/82571.c:1558 [e1000e]e1000_check_for_serdes_link_82571 =_ "AN_PROG   -> AN_UP\012"
drivers/net/ethernet/intel/e1000e/82571.c:1543 [e1000e]e1000_check_for_serdes_link_82571 =_ "FORCED_UP -> AN_PROG\012"
drivers/net/ethernet/intel/e1000e/82571.c:1524 [e1000e]e1000_check_for_serdes_link_82571 =_ "AN_UP     -> AN_PROG\012"
drivers/net/ethernet/intel/e1000e/82571.c:1095 [e1000e]e1000_init_hw_82571 =_ "Zeroing the MTA\012"
drivers/net/ethernet/intel/e1000e/82571.c:1082 [e1000e]e1000_init_hw_82571 =_ "Initializing the IEEE VLAN\012"
drivers/net/ethernet/intel/e1000e/82571.c:1079 [e1000e]e1000_init_hw_82571 =_ "Error initializing identification LED\012"
drivers/net/ethernet/intel/e1000e/82571.c:983 [e1000e]e1000_reset_hw_82571 =_ "Issuing a global reset to MAC\012"
drivers/net/ethernet/intel/e1000e/82571.c:955 [e1000e]e1000_reset_hw_82571 =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/e1000e/82571.c:953 [e1000e]e1000_reset_hw_82571 =_ "PCI-E Master disable polling has failed.\012"
drivers/net/ethernet/intel/e1000e/82571.c:857 [e1000e]e1000_get_cfg_done_82571 =_ "MNG configuration cycle has not completed.\012"
drivers/net/ethernet/intel/e1000e/82571.c:817 [e1000e]e1000_write_nvm_eewr_82571 =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/e1000e/82571.c:530 [e1000e]e1000_get_hw_semaphore_82573 =_ "Driver can't access the PHY\012"
drivers/net/ethernet/intel/e1000e/82571.c:480 [e1000e]e1000_get_hw_semaphore_82571 =_ "Driver can't access the NVM\012"
drivers/net/ethernet/intel/e1000e/82571.c:462 [e1000e]e1000_get_hw_semaphore_82571 =_ "Driver can't access device - SMBI bit is set.\012"
drivers/net/ethernet/intel/e1000e/82571.c:302 [e1000e]e1000_init_mac_params_82571 =_ "Please update your 82571 Bootagent\012"
drivers/net/ethernet/intel/e1000e/82571.c:111 [e1000e]e1000_init_phy_params_82571 =_ "PHY ID unknown: type = 0x%08x\012"
drivers/net/ethernet/intel/e1000e/82571.c:85 [e1000e]e1000_init_phy_params_82571 =_ "Error getting PHY ID\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5715 [e1000e]e1000_get_cfg_done_ich8lan =_ "EEPROM not present\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5704 [e1000e]e1000_get_cfg_done_ich8lan =_ "PHY Reset Asserted not set - needs delay\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5694 [e1000e]e1000_get_cfg_done_ich8lan =_ "Auto Read Done did not complete\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5529 [e1000e]e1000_resume_workarounds_pchlan =_ "Error %d in resume workarounds\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5499 [e1000e]e1000_resume_workarounds_pchlan =_ "Failed to setup iRST\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5485 [e1000e]e1000_resume_workarounds_pchlan =_ "Failed to init PHY flow ret_val=%d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5249 [e1000e]e1000e_set_kmrn_lock_loss_workaround_ich8lan =_ "Workaround applies to ICH8 only.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:5009 [e1000e]e1000_setup_link_ich8lan =_ "After fix-ups FlowControl is now = %x\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4832 [e1000e]e1000_init_hw_ich8lan =_ "Zeroing the MTA\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4826 [e1000e]e1000_init_hw_ich8lan =_ "Error initializing identification LED\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4758 [e1000e]e1000_reset_hw_ich8lan =_ "Issuing a global reset to ich8lan\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4708 [e1000e]e1000_reset_hw_ich8lan =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4706 [e1000e]e1000_reset_hw_ich8lan =_ "PCI-E Master disable polling has failed.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4580 [e1000e]e1000_valid_led_default_ich8lan =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4441 [e1000e]e1000_retry_write_flash_byte_ich8lan =_ "Retrying Byte %2.2X at offset %u\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4409 [e1000e]e1000_retry_write_flash_dword_ich8lan =_ "Retrying Byte %8.8X at offset %u\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4363 [e1000e]e1000_write_flash_data32_ich8lan =_ "Timeout error - flash cycle did not complete.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4279 [e1000e]e1000_write_flash_data_ich8lan =_ "Timeout error - flash cycle did not complete.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4139 [e1000e]e1000_validate_nvm_checksum_ich8lan =_ "NVM Checksum valid bit not set\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4092 [e1000e]e1000_update_nvm_checksum_ich8lan =_ "NVM update error: %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:4042 [e1000e]e1000_update_nvm_checksum_ich8lan =_ "Flash commit failed.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3980 [e1000e]e1000_update_nvm_checksum_ich8lan =_ "Could not detect valid bank, assuming bank 0\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3941 [e1000e]e1000_update_nvm_checksum_spt =_ "NVM update error: %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3885 [e1000e]e1000_update_nvm_checksum_spt =_ "Flash commit failed.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3819 [e1000e]e1000_update_nvm_checksum_spt =_ "Could not detect valid bank, assuming bank 0\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3769 [e1000e]e1000_write_nvm_ich8lan =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3742 [e1000e]e1000_read_flash_data32_ich8lan =_ "Timeout error - flash cycle did not complete.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3667 [e1000e]e1000_read_flash_data_ich8lan =_ "Timeout error - flash cycle did not complete.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3489 [e1000e]e1000_flash_cycle_init_ich8lan =_ "Flash controller busy, cannot get access\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3433 [e1000e]e1000_flash_cycle_init_ich8lan =_ "Flash descriptor invalid.  SW Sequencing must be used.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3412 [e1000e]e1000_read_nvm_ich8lan =_ "NVM read error: %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3387 [e1000e]e1000_read_nvm_ich8lan =_ "Could not detect valid bank, assuming bank 0\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3378 [e1000e]e1000_read_nvm_ich8lan =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3352 [e1000e]e1000_read_nvm_spt =_ "NVM read error: %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3296 [e1000e]e1000_read_nvm_spt =_ "Could not detect valid bank, assuming bank 0\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3287 [e1000e]e1000_read_nvm_spt =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3259 [e1000e]e1000_valid_nvm_bank_detect_ich8lan =_ "ERROR: No valid NVM bank present\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3230 [e1000e]e1000_valid_nvm_bank_detect_ich8lan =_ "Unable to determine valid NVM bank via EEC - reading flash signature\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:3216 [e1000e]e1000_valid_nvm_bank_detect_ich8lan =_ "ERROR: No valid NVM bank present\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:2861 [e1000e]e1000_lan_init_done_ich8lan =_ "LAN_INIT_DONE not set, increase timeout\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:2093 [e1000e]e1000_write_smbus_addr =_ "Unsupported SMB frequency in PHY\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:2036 [e1000e]e1000_rar_set_pch_lpt =_ "Failed to write receive address at index %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1926 [e1000e]e1000_rar_set_pch2lan =_ "Failed to write receive address at index %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1921 [e1000e]e1000_rar_set_pch2lan =_ "SHRA[%d] might be locked by ME - FWSM=0x%8.8x\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1822 [e1000e]e1000_release_swflag_ich8lan =_ "Semaphore unexpectedly released by sw/fw/hw\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1790 [e1000e]e1000_acquire_swflag_ich8lan =_ "Failed to acquire the semaphore, FW or HW has it: FWSM=0x%8.8x EXTCNF_CTRL=0x%8.8x)\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1770 [e1000e]e1000_acquire_swflag_ich8lan =_ "SW has already locked the resource.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1756 [e1000e]e1000_acquire_swflag_ich8lan =_ "contention for Phy access\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1647 [e1000e]e1000_check_for_copper_link_ich8lan =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1377 [e1000e]e1000_disable_ulp_lpt_lp =_ "Error in ULP disable flow: %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1287 [e1000e]e1000_disable_ulp_lpt_lp =_ "ULP_CONFIG_DONE cleared after %d msec\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1220 [e1000e]e1000_enable_ulp_lpt_lp =_ "Error in ULP enable flow: %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1136 [e1000e]e1000_enable_ulp_lpt_lp =_ "CABLE_DISCONNECTED %s set after %dmsec\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1055 [e1000e]e1000_platform_pm_pch_lpt =_ "Invalid LTR latency scale %d\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1030 [e1000e]e1000_platform_pm_pch_lpt =_ "Speed not set.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:1024 [e1000e]e1000_platform_pm_pch_lpt =_ "max_frame_size not set.\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:622 [e1000e]e1000_init_nvm_params_ich8lan =_ "ERROR: Flash registers not mapped\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:536 [e1000e]e1000_init_phy_params_ich8lan =_ "Cannot determine PHY addr. Erroring out\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:353 [e1000e]e1000_init_phy_workarounds_pchlan =_ "Required LANPHYPC toggle blocked by ME\012"
drivers/net/ethernet/intel/e1000e/ich8lan.c:309 [e1000e]e1000_init_phy_workarounds_pchlan =_ "Failed to initialize PHY flow\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:942 [e1000e]e1000_copper_link_setup_gg82563_80003es2lan =_ "Error Resetting the PHY\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:773 [e1000e]e1000_init_hw_80003es2lan =_ "Error disabling far-end loopback\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:771 [e1000e]e1000_init_hw_80003es2lan =_ "Error disabling far-end loopback\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:752 [e1000e]e1000_init_hw_80003es2lan =_ "Zeroing the MTA\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:745 [e1000e]e1000_init_hw_80003es2lan =_ "Initializing the IEEE VLAN\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:742 [e1000e]e1000_init_hw_80003es2lan =_ "Error initializing identification LED\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:707 [e1000e]e1000_reset_hw_80003es2lan =_ "Error disabling far-end loopback\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:705 [e1000e]e1000_reset_hw_80003es2lan =_ "Error disabling far-end loopback\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:691 [e1000e]e1000_reset_hw_80003es2lan =_ "Issuing a global reset to MAC\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:676 [e1000e]e1000_reset_hw_80003es2lan =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:674 [e1000e]e1000_reset_hw_80003es2lan =_ "PCI-E Master disable polling has failed.\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:557 [e1000e]e1000_phy_force_speed_duplex_80003es2lan =_ "Waiting for forced speed/duplex link on GG82563 phy.\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:539 [e1000e]e1000_phy_force_speed_duplex_80003es2lan =_ "GG82563 PSCR: %X\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:507 [e1000e]e1000_get_cfg_done_80003es2lan =_ "MNG configuration cycle has not completed.\012"
drivers/net/ethernet/intel/e1000e/80003es2lan.c:298 [e1000e]e1000_acquire_swfw_sync_80003es2lan =_ "Driver can't access resource, SW_FW_SYNC timeout.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1758 [e1000e]e1000e_update_adaptive =_ "Not in Adaptive IFS mode!\012"
drivers/net/ethernet/intel/e1000e/mac.c:1732 [e1000e]e1000e_reset_adaptive =_ "Not in Adaptive IFS mode!\012"
drivers/net/ethernet/intel/e1000e/mac.c:1714 [e1000e]e1000e_disable_pcie_master =_ "Master requests are pending.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1451 [e1000e]e1000e_valid_led_default =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/mac.c:1430 [e1000e]e1000e_get_auto_rd_done =_ "Auto read by HW from NVM has not completed.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1390 [e1000e]e1000e_get_hw_semaphore =_ "Driver can't access the NVM\012"
drivers/net/ethernet/intel/e1000e/mac.c:1371 [e1000e]e1000e_get_hw_semaphore =_ "Driver can't access device - SMBI bit is set.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1323 [e1000e]e1000e_get_speed_and_duplex_copper =_ "%u Mbps, %s Duplex\012"
drivers/net/ethernet/intel/e1000e/mac.c:1288 [e1000e]e1000e_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/e1000e/mac.c:1276 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = NONE.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1270 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = Rx PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1256 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = Tx PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1241 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = Rx PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1238 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = FULL.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1182 [e1000e]e1000e_config_fc_after_link_up =_ "PCS Auto Neg has not completed.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1164 [e1000e]e1000e_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/e1000e/mac.c:1152 [e1000e]e1000e_config_fc_after_link_up =_ "Error getting link speed and duplex\012"
drivers/net/ethernet/intel/e1000e/mac.c:1143 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = NONE.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1137 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = Rx PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1123 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = Tx PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1108 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = Rx PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1105 [e1000e]e1000e_config_fc_after_link_up =_ "Flow Control = FULL.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1045 [e1000e]e1000e_config_fc_after_link_up =_ "Copper PHY and Auto Neg has not completed.\012"
drivers/net/ethernet/intel/e1000e/mac.c:1023 [e1000e]e1000e_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/e1000e/mac.c:982 [e1000e]e1000e_force_mac_fc =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/e1000e/mac.c:964 [e1000e]e1000e_force_mac_fc =_ "hw->fc.current_mode = %u\012"
drivers/net/ethernet/intel/e1000e/mac.c:870 [e1000e]e1000e_setup_fiber_serdes_link =_ "No signal detected\012"
drivers/net/ethernet/intel/e1000e/mac.c:856 [e1000e]e1000e_setup_fiber_serdes_link =_ "Auto-negotiation enabled\012"
drivers/net/ethernet/intel/e1000e/mac.c:821 [e1000e]e1000_poll_fiber_serdes_link_generic =_ "Valid Link Found\012"
drivers/net/ethernet/intel/e1000e/mac.c:815 [e1000e]e1000_poll_fiber_serdes_link_generic =_ "Error while checking for link\012"
drivers/net/ethernet/intel/e1000e/mac.c:806 [e1000e]e1000_poll_fiber_serdes_link_generic =_ "Never got a valid link from auto-neg!!!\012"
drivers/net/ethernet/intel/e1000e/mac.c:770 [e1000e]e1000_commit_fc_settings_generic =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/e1000e/mac.c:704 [e1000e]e1000e_setup_link_generic =_ "Initializing the Flow Control address, type and timer regs\012"
drivers/net/ethernet/intel/e1000e/mac.c:692 [e1000e]e1000e_setup_link_generic =_ "After fix-ups FlowControl is now = %x\012"
drivers/net/ethernet/intel/e1000e/mac.c:644 [e1000e]e1000_set_default_fc_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/mac.c:614 [e1000e]e1000e_check_for_serdes_link =_ "SERDES: Link down - autoneg failed\012"
drivers/net/ethernet/intel/e1000e/mac.c:610 [e1000e]e1000e_check_for_serdes_link =_ "SERDES: Link down - no sync.\012"
drivers/net/ethernet/intel/e1000e/mac.c:606 [e1000e]e1000e_check_for_serdes_link =_ "SERDES: Link down - invalid codewords detected in autoneg.\012"
drivers/net/ethernet/intel/e1000e/mac.c:603 [e1000e]e1000e_check_for_serdes_link =_ "SERDES: Link up - autoneg completed successfully.\012"
drivers/net/ethernet/intel/e1000e/mac.c:590 [e1000e]e1000e_check_for_serdes_link =_ "SERDES: Link down - force failed.\012"
drivers/net/ethernet/intel/e1000e/mac.c:586 [e1000e]e1000e_check_for_serdes_link =_ "SERDES: Link up - forced.\012"
drivers/net/ethernet/intel/e1000e/mac.c:570 [e1000e]e1000e_check_for_serdes_link =_ "Rx'ing /C/, enable AutoNeg and stop forcing link.\012"
drivers/net/ethernet/intel/e1000e/mac.c:561 [e1000e]e1000e_check_for_serdes_link =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/e1000e/mac.c:548 [e1000e]e1000e_check_for_serdes_link =_ "NOT Rx'ing /C/, disable AutoNeg and force link.\012"
drivers/net/ethernet/intel/e1000e/mac.c:507 [e1000e]e1000e_check_for_fiber_link =_ "Rx'ing /C/, enable AutoNeg and stop forcing link.\012"
drivers/net/ethernet/intel/e1000e/mac.c:498 [e1000e]e1000e_check_for_fiber_link =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/e1000e/mac.c:485 [e1000e]e1000e_check_for_fiber_link =_ "NOT Rx'ing /C/, disable AutoNeg and force link.\012"
drivers/net/ethernet/intel/e1000e/mac.c:443 [e1000e]e1000e_check_for_copper_link =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/e1000e/mac.c:183 [e1000e]e1000_check_alt_mac_addr_generic =_ "Ignoring Alternate Mac Address with MC bit set\012"
drivers/net/ethernet/intel/e1000e/mac.c:173 [e1000e]e1000_check_alt_mac_addr_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/mac.c:158 [e1000e]e1000_check_alt_mac_addr_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/mac.c:123 [e1000e]e1000e_init_rx_addrs =_ "Clearing RAR[1-%u]\012"
drivers/net/ethernet/intel/e1000e/mac.c:118 [e1000e]e1000e_init_rx_addrs =_ "Programming MAC Address into RAR[0]\012"
drivers/net/ethernet/intel/e1000e/manage.c:63 [e1000e]e1000_mng_enable_host_if =_ "Previous command timeout failed.\012"
drivers/net/ethernet/intel/e1000e/manage.c:51 [e1000e]e1000_mng_enable_host_if =_ "E1000_HOST_EN bit disabled.\012"
drivers/net/ethernet/intel/e1000e/manage.c:44 [e1000e]e1000_mng_enable_host_if =_ "ARC subsystem not valid.\012"
drivers/net/ethernet/intel/e1000e/nvm.c:594 [e1000e]e1000e_update_nvm_checksum_generic =_ "NVM Write Error while updating checksum.\012"
drivers/net/ethernet/intel/e1000e/nvm.c:586 [e1000e]e1000e_update_nvm_checksum_generic =_ "NVM Read Error while updating checksum.\012"
drivers/net/ethernet/intel/e1000e/nvm.c:562 [e1000e]e1000e_validate_nvm_checksum_generic =_ "NVM Checksum Invalid\012"
drivers/net/ethernet/intel/e1000e/nvm.c:555 [e1000e]e1000e_validate_nvm_checksum_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/nvm.c:499 [e1000e]e1000_read_pba_string_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/nvm.c:488 [e1000e]e1000_read_pba_string_generic =_ "PBA string buffer too small\012"
drivers/net/ethernet/intel/e1000e/nvm.c:483 [e1000e]e1000_read_pba_string_generic =_ "NVM PBA number section invalid length\012"
drivers/net/ethernet/intel/e1000e/nvm.c:478 [e1000e]e1000_read_pba_string_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/nvm.c:446 [e1000e]e1000_read_pba_string_generic =_ "PBA string buffer too small\012"
drivers/net/ethernet/intel/e1000e/nvm.c:442 [e1000e]e1000_read_pba_string_generic =_ "NVM PBA number is not stored as string\012"
drivers/net/ethernet/intel/e1000e/nvm.c:433 [e1000e]e1000_read_pba_string_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/nvm.c:427 [e1000e]e1000_read_pba_string_generic =_ "NVM Read Error\012"
drivers/net/ethernet/intel/e1000e/nvm.c:421 [e1000e]e1000_read_pba_string_generic =_ "PBA string buffer was null\012"
drivers/net/ethernet/intel/e1000e/nvm.c:346 [e1000e]e1000e_write_nvm_spi =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/e1000e/nvm.c:313 [e1000e]e1000e_read_nvm_eerd =_ "NVM read error: %d\012"
drivers/net/ethernet/intel/e1000e/nvm.c:302 [e1000e]e1000e_read_nvm_eerd =_ "nvm parameter(s) out of bounds\012"
drivers/net/ethernet/intel/e1000e/nvm.c:274 [e1000e]e1000_ready_nvm_eeprom =_ "SPI NVM Status error\012"
drivers/net/ethernet/intel/e1000e/nvm.c:169 [e1000e]e1000e_acquire_nvm =_ "Could not acquire NVM grant\012"
drivers/net/ethernet/intel/e1000e/phy.c:3157 [e1000e]e1000_get_phy_info_82577 =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/e1000e/phy.c:3126 [e1000e]e1000_phy_force_speed_duplex_82577 =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/e1000e/phy.c:3118 [e1000e]e1000_phy_force_speed_duplex_82577 =_ "Waiting for forced speed/duplex link on 82577 phy\012"
drivers/net/ethernet/intel/e1000e/phy.c:3015 [e1000e]e1000_access_phy_debug_regs_hv =_ "Could not access the Data port register\012"
drivers/net/ethernet/intel/e1000e/phy.c:3004 [e1000e]e1000_access_phy_debug_regs_hv =_ "Could not write the Address Offset port register\012"
drivers/net/ethernet/intel/e1000e/phy.c:2905 [e1000e]__e1000_write_phy_reg_hv =_ "writing PHY page %d (or 0x%x shifted) reg 0x%x\012"
drivers/net/ethernet/intel/e1000e/phy.c:2781 [e1000e]__e1000_read_phy_reg_hv =_ "reading PHY page %d (or 0x%x shifted) reg 0x%x\012"
drivers/net/ethernet/intel/e1000e/phy.c:2679 [e1000e]e1000_access_phy_wakeup_reg_bm =_ "Could not access PHY reg %d.%d\012"
drivers/net/ethernet/intel/e1000e/phy.c:2664 [e1000e]e1000_access_phy_wakeup_reg_bm =_ "Could not write address opcode to page %d\012"
drivers/net/ethernet/intel/e1000e/phy.c:2659 [e1000e]e1000_access_phy_wakeup_reg_bm =_ "Accessing PHY page %d reg 0x%x\012"
drivers/net/ethernet/intel/e1000e/phy.c:2654 [e1000e]e1000_access_phy_wakeup_reg_bm =_ "Could not enable PHY wakeup reg access\012"
drivers/net/ethernet/intel/e1000e/phy.c:2647 [e1000e]e1000_access_phy_wakeup_reg_bm =_ "Attempting to access page %d while gig enabled.\012"
drivers/net/ethernet/intel/e1000e/phy.c:2605 [e1000e]e1000_disable_phy_wakeup_reg_access_bm =_ "Could not restore PHY register %d.%d\012"
drivers/net/ethernet/intel/e1000e/phy.c:2598 [e1000e]e1000_disable_phy_wakeup_reg_access_bm =_ "Could not set Port Control page\012"
drivers/net/ethernet/intel/e1000e/phy.c:2569 [e1000e]e1000_enable_phy_wakeup_reg_access_bm =_ "Could not write PHY register %d.%d\012"
drivers/net/ethernet/intel/e1000e/phy.c:2555 [e1000e]e1000_enable_phy_wakeup_reg_access_bm =_ "Could not read PHY register %d.%d\012"
drivers/net/ethernet/intel/e1000e/phy.c:2549 [e1000e]e1000_enable_phy_wakeup_reg_access_bm =_ "Could not set Port Control page\012"
drivers/net/ethernet/intel/e1000e/phy.c:2144 [e1000e]e1000e_phy_init_script_igp3 =_ "Running IGP 3 PHY init script\012"
drivers/net/ethernet/intel/e1000e/phy.c:2021 [e1000e]e1000_get_phy_info_ife =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/e1000e/phy.c:1963 [e1000e]e1000e_get_phy_info_igp =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/e1000e/phy.c:1897 [e1000e]e1000e_get_phy_info_m88 =_ "Phy info is only valid if link is up\012"
drivers/net/ethernet/intel/e1000e/phy.c:1888 [e1000e]e1000e_get_phy_info_m88 =_ "Phy info is only valid for copper media\012"
drivers/net/ethernet/intel/e1000e/phy.c:1457 [e1000e]e1000e_phy_force_speed_duplex_setup =_ "Forcing 10mb\012"
drivers/net/ethernet/intel/e1000e/phy.c:1453 [e1000e]e1000e_phy_force_speed_duplex_setup =_ "Forcing 100mb\012"
drivers/net/ethernet/intel/e1000e/phy.c:1445 [e1000e]e1000e_phy_force_speed_duplex_setup =_ "Full Duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:1441 [e1000e]e1000e_phy_force_speed_duplex_setup =_ "Half Duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:1394 [e1000e]e1000_phy_force_speed_duplex_ife =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/e1000e/phy.c:1386 [e1000e]e1000_phy_force_speed_duplex_ife =_ "Waiting for forced speed/duplex link on IFE phy.\012"
drivers/net/ethernet/intel/e1000e/phy.c:1381 [e1000e]e1000_phy_force_speed_duplex_ife =_ "IFE PMC: %X\012"
drivers/net/ethernet/intel/e1000e/phy.c:1293 [e1000e]e1000e_phy_force_speed_duplex_m88 =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/e1000e/phy.c:1284 [e1000e]e1000e_phy_force_speed_duplex_m88 =_ "Waiting for forced speed/duplex link on M88 phy.\012"
drivers/net/ethernet/intel/e1000e/phy.c:1264 [e1000e]e1000e_phy_force_speed_duplex_m88 =_ "M88E1000 PSCR: %X\012"
drivers/net/ethernet/intel/e1000e/phy.c:1225 [e1000e]e1000e_phy_force_speed_duplex_igp =_ "Link taking longer than expected.\012"
drivers/net/ethernet/intel/e1000e/phy.c:1217 [e1000e]e1000e_phy_force_speed_duplex_igp =_ "Waiting for forced speed/duplex link on IGP phy.\012"
drivers/net/ethernet/intel/e1000e/phy.c:1212 [e1000e]e1000e_phy_force_speed_duplex_igp =_ "IGP PSCR: %X\012"
drivers/net/ethernet/intel/e1000e/phy.c:1167 [e1000e]e1000e_setup_copper_link =_ "Unable to establish link!!!\012"
drivers/net/ethernet/intel/e1000e/phy.c:1163 [e1000e]e1000e_setup_copper_link =_ "Valid link established!!!\012"
drivers/net/ethernet/intel/e1000e/phy.c:1149 [e1000e]e1000e_setup_copper_link =_ "Error Forcing Speed and Duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:1146 [e1000e]e1000e_setup_copper_link =_ "Forcing Speed and Duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:1111 [e1000e]e1000_copper_link_autoneg =_ "Error while waiting for autoneg to complete\012"
drivers/net/ethernet/intel/e1000e/phy.c:1091 [e1000e]e1000_copper_link_autoneg =_ "Restarting Auto-Neg\012"
drivers/net/ethernet/intel/e1000e/phy.c:1088 [e1000e]e1000_copper_link_autoneg =_ "Error Setting up Auto-Negotiation\012"
drivers/net/ethernet/intel/e1000e/phy.c:1085 [e1000e]e1000_copper_link_autoneg =_ "Reconfiguring auto-neg advertisement params\012"
drivers/net/ethernet/intel/e1000e/phy.c:1051 [e1000e]e1000_phy_setup_autoneg =_ "Auto-Neg Advertising %x\012"
drivers/net/ethernet/intel/e1000e/phy.c:1043 [e1000e]e1000_phy_setup_autoneg =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/e1000e/phy.c:986 [e1000e]e1000_phy_setup_autoneg =_ "Advertise 1000mb Full duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:982 [e1000e]e1000_phy_setup_autoneg =_ "Advertise 1000mb Half duplex request denied!\012"
drivers/net/ethernet/intel/e1000e/phy.c:976 [e1000e]e1000_phy_setup_autoneg =_ "Advertise 100mb Full duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:970 [e1000e]e1000_phy_setup_autoneg =_ "Advertise 100mb Half duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:964 [e1000e]e1000_phy_setup_autoneg =_ "Advertise 10mb Full duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:958 [e1000e]e1000_phy_setup_autoneg =_ "Advertise 10mb Half duplex\012"
drivers/net/ethernet/intel/e1000e/phy.c:954 [e1000e]e1000_phy_setup_autoneg =_ "autoneg_advertised %x\012"
drivers/net/ethernet/intel/e1000e/phy.c:845 [e1000e]e1000e_copper_link_setup_igp =_ "Error Disabling LPLU D0\012"
drivers/net/ethernet/intel/e1000e/phy.c:832 [e1000e]e1000e_copper_link_setup_igp =_ "Error resetting the PHY.\012"
drivers/net/ethernet/intel/e1000e/phy.c:796 [e1000e]e1000e_copper_link_setup_m88 =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/e1000e/phy.c:740 [e1000e]e1000e_copper_link_setup_m88 =_ "Error committing the PHY changes\012"
drivers/net/ethernet/intel/e1000e/phy.c:298 [e1000e]e1000_set_page_igp =_ "Setting page 0x%x\012"
drivers/net/ethernet/intel/e1000e/phy.c:221 [e1000e]e1000e_write_phy_reg_mdic =_ "MDI Write offset error - requested %d, returned %d\012"
drivers/net/ethernet/intel/e1000e/phy.c:217 [e1000e]e1000e_write_phy_reg_mdic =_ "MDI Error\012"
drivers/net/ethernet/intel/e1000e/phy.c:213 [e1000e]e1000e_write_phy_reg_mdic =_ "MDI Write did not complete\012"
drivers/net/ethernet/intel/e1000e/phy.c:187 [e1000e]e1000e_write_phy_reg_mdic =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/e1000e/phy.c:157 [e1000e]e1000e_read_phy_reg_mdic =_ "MDI Read offset error - requested %d, returned %d\012"
drivers/net/ethernet/intel/e1000e/phy.c:153 [e1000e]e1000e_read_phy_reg_mdic =_ "MDI Error\012"
drivers/net/ethernet/intel/e1000e/phy.c:149 [e1000e]e1000e_read_phy_reg_mdic =_ "MDI Read did not complete\012"
drivers/net/ethernet/intel/e1000e/phy.c:124 [e1000e]e1000e_read_phy_reg_mdic =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/e1000e/netdev.c:7673 [e1000e]e1000_probe =_ "NVM read error getting EEPROM version: %d\012"
drivers/net/ethernet/intel/e1000e/netdev.c:7650 [e1000e]e1000_probe =_ "NVM read error getting WoL initial values: %d\012"
drivers/net/ethernet/intel/e1000e/netdev.c:6507 [e1000e]e1000e_s0ix_exit_flow =_ "DPG_EXIT_DONE cleared after %d msec\012"
drivers/net/ethernet/intel/e1000e/netdev.c:6496 [e1000e]e1000e_s0ix_exit_flow =_ "Timeout (firmware bug): %d msec\012"
drivers/net/ethernet/intel/e1000e/netdev.c:6051 [e1000e]e1000_change_mtu =_ "changing MTU from %d to %d\012"
drivers/net/ethernet/intel/e1000e/netdev.c:5234 [e1000e]e1000_watchdog_task =_ "Error in exiting dmoff\012"
drivers/net/ethernet/intel/e1000e/netdev.c:5174 [e1000e]e1000e_check_82574_phy_workaround =_ "PHY appears hung - resetting\012"
drivers/net/ethernet/intel/e1000e/netdev.c:4566 [e1000e]e1000_test_msi_interrupt =_ "MSI interrupt test succeeded!\012"
drivers/net/ethernet/intel/e1000e/netdev.c:4498 [e1000e]e1000_intr_msi_test =_ "icr is %08X\012"
drivers/net/ethernet/intel/e1000e/netdev.c:4323 [e1000e]e1000e_down =_ "failed to disable jumbo frame workaround mode\012"
drivers/net/ethernet/intel/e1000e/netdev.c:3058 [e1000e]e1000_setup_rctl =_ "failed to enable|disable jumbo frame workaround mode\012"
drivers/net/ethernet/intel/e1000e/netdev.c:1375 [e1000e]e1000_clean_rx_irq_ps =_ "Last part of the packet spanning multiple descriptors\012"
drivers/net/ethernet/intel/e1000e/netdev.c:1359 [e1000e]e1000_clean_rx_irq_ps =_ "Packet Split buffers didn't pick up the full packet\012"
drivers/net/ethernet/intel/e1000e/netdev.c:1121 [e1000e]e1000_print_hw_hang =_ "false hang detected, ignoring\012"
drivers/net/ethernet/intel/e1000e/netdev.c:972 [e1000e]e1000_clean_rx_irq =_ "Receive packet consumed multiple buffers\012"
drivers/net/ethernet/intel/e1000e/ptp.c:249 [e1000e]e1000e_systim_overflow_work =_ "SYSTIM overflow check at %lld.%09lu\012"
drivers/net/ethernet/intel/e1000/e1000_main.c:4421 [e1000]e1000_clean_rx_irq =_ "Receive packet consumed multiple buffers\012"
drivers/net/ethernet/intel/e1000/e1000_main.c:3571 [e1000]e1000_change_mtu =_ "changing MTU from %d to %d\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:5177 [e1000]e1000_config_dsp_after_link_change =_ "Error getting link speed and duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4792 [e1000]e1000_update_adaptive =_ "Not in Adaptive IFS mode!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4756 [e1000]e1000_reset_adaptive =_ "Not in Adaptive IFS mode!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4432 [e1000]e1000_id_led_init =_ "EEPROM Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4280 [e1000]e1000_init_rx_addrs =_ "Clearing RAR[1-14]\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4271 [e1000]e1000_init_rx_addrs =_ "Programming MAC Address into RAR[0]\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4235 [e1000]e1000_read_mac_addr =_ "EEPROM Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4195 [e1000]e1000_write_eeprom_microwire =_ "EEPROM Write did not complete\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4050 [e1000]e1000_do_write_eeprom =_ "\042words\042 parameter out of bounds\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:4006 [e1000]e1000_update_eeprom_checksum =_ "EEPROM Write Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3999 [e1000]e1000_update_eeprom_checksum =_ "EEPROM Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3980 [e1000]e1000_validate_eeprom_checksum =_ "EEPROM Checksum Invalid\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3965 [e1000]e1000_validate_eeprom_checksum =_ "EEPROM Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3877 [e1000]e1000_do_read_eeprom =_ "\042words\042 parameter out of bounds. Words = %d,size = %d\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3835 [e1000]e1000_spi_eeprom_ready =_ "SPI EEPROM Status error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3682 [e1000]e1000_acquire_eeprom =_ "Could not acquire EEPROM grant\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3428 [e1000]e1000_validate_mdi_setting =_ "Invalid MDI setting detected\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3412 [e1000]e1000_phy_get_info =_ "PHY info is only valid if link is up\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3399 [e1000]e1000_phy_get_info =_ "PHY info is only valid for copper media\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3196 [e1000]e1000_detect_gig_phy =_ "Invalid PHY ID 0x%X\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3193 [e1000]e1000_detect_gig_phy =_ "PHY ID 0x%X detected\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3187 [e1000]e1000_detect_gig_phy =_ "Invalid MAC type %d\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3043 [e1000]e1000_phy_hw_reset =_ "Resetting Phy...\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:3003 [e1000]e1000_write_phy_reg_ex =_ "MDI Write did not complete\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2982 [e1000]e1000_write_phy_reg_ex =_ "MDI Write did not complete\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2953 [e1000]e1000_write_phy_reg_ex =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2874 [e1000]e1000_read_phy_reg_ex =_ "MDI Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2870 [e1000]e1000_read_phy_reg_ex =_ "MDI Read did not complete\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2849 [e1000]e1000_read_phy_reg_ex =_ "MDI Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2843 [e1000]e1000_read_phy_reg_ex =_ "MDI Read did not complete\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2815 [e1000]e1000_read_phy_reg_ex =_ "PHY Address %d is out of range\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2623 [e1000]e1000_wait_autoneg =_ "Waiting for Auto-Neg to complete.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2579 [e1000]e1000_get_speed_and_duplex =_ "1000 Mbs, Full Duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2576 [e1000]e1000_get_speed_and_duplex =_ " Half Duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2573 [e1000]e1000_get_speed_and_duplex =_ "Full Duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2568 [e1000]e1000_get_speed_and_duplex =_ "10 Mbs, "
drivers/net/ethernet/intel/e1000/e1000_hw.c:2565 [e1000]e1000_get_speed_and_duplex =_ "100 Mbs, "
drivers/net/ethernet/intel/e1000/e1000_hw.c:2562 [e1000]e1000_get_speed_and_duplex =_ "1000 Mbs, "
drivers/net/ethernet/intel/e1000/e1000_hw.c:2503 [e1000]e1000_check_for_link =_ "Error getting link speed and duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2484 [e1000]e1000_check_for_link =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2471 [e1000]e1000_check_for_link =_ "Error configuring MAC to PHY settings\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2354 [e1000]e1000_check_for_serdes_link_generic =_ "SERDES: Link down - autoneg failed\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2350 [e1000]e1000_check_for_serdes_link_generic =_ "SERDES: Link down - no sync.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2345 [e1000]e1000_check_for_serdes_link_generic =_ "SERDES: Link down - invalidcodewords detected in autoneg.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2341 [e1000]e1000_check_for_serdes_link_generic =_ "SERDES: Link up - autoneg completed successfully.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2328 [e1000]e1000_check_for_serdes_link_generic =_ "SERDES: Link down - force failed.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2324 [e1000]e1000_check_for_serdes_link_generic =_ "SERDES: Link up - forced.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2308 [e1000]e1000_check_for_serdes_link_generic =_ "RXing /C/, enable AutoNeg and stop forcing link.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2299 [e1000]e1000_check_for_serdes_link_generic =_ "Error configuring flow control\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2286 [e1000]e1000_check_for_serdes_link_generic =_ "NOT RXing /C/, disable AutoNeg and force link.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2249 [e1000]e1000_config_fc_after_link_up =_ "Copper PHY and Auto Neg has not completed.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2244 [e1000]e1000_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2231 [e1000]e1000_config_fc_after_link_up =_ "Error getting link speed and duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2220 [e1000]e1000_config_fc_after_link_up =_ "Flow Control = RX PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2217 [e1000]e1000_config_fc_after_link_up =_ "Flow Control = NONE.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2188 [e1000]e1000_config_fc_after_link_up =_ "Flow Control = RX PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2172 [e1000]e1000_config_fc_after_link_up =_ "Flow Control = TX PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2155 [e1000]e1000_config_fc_after_link_up =_ "Flow Control = RX PAUSE frames only.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2152 [e1000]e1000_config_fc_after_link_up =_ "Flow Control = FULL.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2068 [e1000]e1000_config_fc_after_link_up =_ "Error forcing flow control settings\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:2024 [e1000]e1000_force_mac_fc =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1797 [e1000]e1000_phy_force_speed_duplex =_ "Error Resetting PHY DSP\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1769 [e1000]e1000_phy_force_speed_duplex =_ "Waiting for forced speed/duplex link.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1729 [e1000]e1000_phy_force_speed_duplex =_ "M88E1000 PSCR: %x\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1706 [e1000]e1000_phy_force_speed_duplex =_ "Forcing 10mb "
drivers/net/ethernet/intel/e1000/e1000_hw.c:1700 [e1000]e1000_phy_force_speed_duplex =_ "Forcing 100mb "
drivers/net/ethernet/intel/e1000/e1000_hw.c:1690 [e1000]e1000_phy_force_speed_duplex =_ "Half Duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1683 [e1000]e1000_phy_force_speed_duplex =_ "Full Duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1654 [e1000]e1000_phy_force_speed_duplex =_ "hw->fc = %d\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1622 [e1000]e1000_phy_setup_autoneg =_ "Auto-Neg Advertising %x\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1614 [e1000]e1000_phy_setup_autoneg =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1560 [e1000]e1000_phy_setup_autoneg =_ "Advertise 1000mb Full duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1554 [e1000]e1000_phy_setup_autoneg =_ "Advertise 1000mb Half duplex requested, request denied!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1548 [e1000]e1000_phy_setup_autoneg =_ "Advertise 100mb Full duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1542 [e1000]e1000_phy_setup_autoneg =_ "Advertise 100mb Half duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1536 [e1000]e1000_phy_setup_autoneg =_ "Advertise 10mb Full duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1530 [e1000]e1000_phy_setup_autoneg =_ "Advertise 10mb Half duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1526 [e1000]e1000_phy_setup_autoneg =_ "autoneg_advertised %x\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1484 [e1000]e1000_setup_copper_link =_ "Unable to establish link!!!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1478 [e1000]e1000_setup_copper_link =_ "Valid link established!!!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1456 [e1000]e1000_setup_copper_link =_ "Error Forcing Speed and Duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1453 [e1000]e1000_setup_copper_link =_ "Forcing speed and duplex\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1437 [e1000]e1000_setup_copper_link =_ "gbe_dhg_phy_setup failed!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1401 [e1000]e1000_copper_link_postconfig =_ "Error Configuring DSP after link up\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1393 [e1000]e1000_copper_link_postconfig =_ "Error Configuring Flow Control\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1387 [e1000]e1000_copper_link_postconfig =_ "Error configuring MAC to PHY settings\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1354 [e1000]e1000_copper_link_autoneg =_ "Error while waiting for autoneg to complete\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1334 [e1000]e1000_copper_link_autoneg =_ "Restarting Auto-Neg\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1331 [e1000]e1000_copper_link_autoneg =_ "Error Setting up Auto-Negotiation\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1328 [e1000]e1000_copper_link_autoneg =_ "Reconfiguring auto-neg advertisement params\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1294 [e1000]e1000_copper_link_mgp_setup =_ "Error Resetting the PHY\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1088 [e1000]e1000_copper_link_igp_setup =_ "Error Disabling LPLU D3\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1071 [e1000]e1000_copper_link_igp_setup =_ "Error Resetting the PHY\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1031 [e1000]e1000_copper_link_preconfig =_ "Phy ID = %x\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:1028 [e1000]e1000_copper_link_preconfig =_ "Error, did not detect valid phy.\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:988 [e1000]gbe_dhg_phy_setup =_ "Error Resetting the PHY\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:983 [e1000]gbe_dhg_phy_setup =_ "e1000_copper_link_rtl_setup failed!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:963 [e1000]gbe_dhg_phy_setup =_ "e1000_copper_link_rtl_setup failed!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:947 [e1000]e1000_copper_link_rtl_setup =_ "Error Resetting the PHY\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:929 [e1000]e1000_setup_fiber_serdes_link =_ "No Signal Detected\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:926 [e1000]e1000_setup_fiber_serdes_link =_ "Valid Link Found\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:920 [e1000]e1000_setup_fiber_serdes_link =_ "Error while checking for link\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:911 [e1000]e1000_setup_fiber_serdes_link =_ "Never got a valid link from auto-neg!!!\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:903 [e1000]e1000_setup_fiber_serdes_link =_ "Looking for Link\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:885 [e1000]e1000_setup_fiber_serdes_link =_ "Auto-negotiation enabled\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:875 [e1000]e1000_setup_fiber_serdes_link =_ "Flow control param set incorrectly\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:757 [e1000]e1000_setup_link =_ "Initializing the Flow Control address, type and timer regs\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:740 [e1000]e1000_setup_link =_ "EEPROM Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:727 [e1000]e1000_setup_link =_ "After fix-ups FlowControl is now = %x\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:703 [e1000]e1000_setup_link =_ "EEPROM Read Error\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:572 [e1000]e1000_init_hw =_ "Zeroing the MTA\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:550 [e1000]e1000_init_hw =_ "Disabling MWI on 82542 rev 2.0\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:543 [e1000]e1000_init_hw =_ "Initializing the IEEE VLAN\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:535 [e1000]e1000_init_hw =_ "Error Initializing Identification LED\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:499 [e1000]e1000_reset_hw =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:423 [e1000]e1000_reset_hw =_ "Issuing a global reset to MAC\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:390 [e1000]e1000_reset_hw =_ "Masking off all interrupts\012"
drivers/net/ethernet/intel/e1000/e1000_hw.c:385 [e1000]e1000_reset_hw =_ "Disabling MWI on 82542 rev 2.0\012"
drivers/net/mdio/fwnode_mdio.c:92 [fwnode_mdio]fwnode_mdiobus_phy_device_register =_ "registered phy %p fwnode at address %i\012"
drivers/net/phy/phy.c:64 [libphy]phy_process_state_change =_ "PHY state change %s -> %s\012"
drivers/net/phy/phy_device.c:3187 [libphy]phy_driver_register =_ "%s: Registered new driver\012"
drivers/net/phy/mdio_bus.c:599 [libphy]__mdiobus_register =_ "probed\012"
drivers/net/phy/mdio_device.c:203 [libphy]mdio_driver_register =_ "%s: %s\012"
drivers/net/phy/mdio_device.c:82 [libphy]mdio_device_register =_ "%s\012"
drivers/spi/spi-amd.c:275 [spi_amd]amd_spi_probe =_ "io_remap_address: %p\012"
drivers/spi/spi.c:3614 [spi]spi_setup =_ "setup mode %lu, %s%s%s%s%u bits/w, %u Hz max --> %d\012"
drivers/spi/spi.c:2937 [spi]spi_register_controller =_ "registered %s %s\012"
drivers/spi/spi.c:661 [spi]__spi_add_device =_ "registered child %s\012"
drivers/scsi/megaraid/megaraid_sas_base.c:5198 [megaraid_sas]megasas_get_snapdump_properties =_ "Failed to get a free cmd\012"
drivers/scsi/megaraid/megaraid_sas_fusion.c:4914 [megaraid_sas]megasas_reset_fusion =_ "waiting for [%d] seconds for crash dump collection and OCR to be done\012"
drivers/scsi/megaraid/megaraid_sas_fusion.c:4467 [megaraid_sas]megasas_tm_response_code =_ "TerminationCount/DevHandle/Function/TaskType/IOCStat/IOCLoginfo 0x%x/0x%x/0x%x/0x%x/0x%x/0x%x\012"
drivers/scsi/megaraid/megaraid_sas_fusion.c:4465 [megaraid_sas]megasas_tm_response_code =_ "response_code(%01x): %s\012"
drivers/scsi/megaraid/megaraid_sas_fusion.c:3574 [megaraid_sas]complete_cmd_fusion =_ "TM completion:type: 0x%x TaskMID: 0x%x\012"
drivers/scsi/megaraid/megaraid_sas_fp.c:336 [megaraid_sas]MR_ValidateMapInfo =_ "is not matching expected size 0x%x\012"
drivers/scsi/megaraid/megaraid_sas_fp.c:334 [megaraid_sas]MR_ValidateMapInfo =_ "megasas: map info structure size 0x%x"
drivers/scsi/megaraid/megaraid_sas_fp.c:275 [megaraid_sas]MR_PopulateDrvRaidMap =_ "LD count exposed in RAID map in not valid\012"
drivers/scsi/megaraid/megaraid_sas_fp.c:247 [megaraid_sas]MR_PopulateDrvRaidMap =_ "megaraid_sas: LD count exposed in RAID map in not valid\012"
drivers/scsi/megaraid/megaraid_sas_fp.c:236 [megaraid_sas]MR_PopulateDrvRaidMap =_ "wrong number of desctableElements %d\012"
drivers/scsi/megaraid/megaraid_sas_fp.c:183 [megaraid_sas]MR_PopulateDrvRaidMap =_ "offsets of desc table are not matching desc %p original %p\012"
drivers/scsi/isci/phy.c:1477 [isci]isci_phy_control =_ "%s: phy %p; func %d NOT IMPLEMENTED!\012"
drivers/scsi/isci/phy.c:1437 [isci]isci_phy_control =_ "%s: phy %p; func %d; buf %p; isci phy %p, port %p\012"
drivers/scsi/isci/phy.c:1054 [isci]sci_phy_frame_handler =_ "%s: in wrong state: %s\012"
drivers/scsi/isci/phy.c:960 [isci]sci_phy_event_handler =_ "%s: in wrong state: %s\012"
drivers/scsi/isci/phy.c:704 [isci]sci_phy_event_handler =_ "phy-%d:%d: %s event: %s (%x)\012"
drivers/scsi/isci/phy.c:559 [isci]sci_phy_consume_power_handler =_ "%s: in wrong state: %s\012"
drivers/scsi/isci/phy.c:509 [isci]sci_phy_reset =_ "%s: in wrong state: %s\012"
drivers/scsi/isci/phy.c:495 [isci]sci_phy_stop =_ "%s: in wrong state: %s\012"
drivers/scsi/isci/phy.c:469 [isci]sci_phy_start =_ "%s: in wrong state: %s\012"
drivers/scsi/isci/phy.c:330 [isci]phy_sata_timeout =_ "%s: SCIC SDS Phy 0x%p did not receive signature fis before timeout.\012"
drivers/scsi/isci/request.c:3482 [isci]isci_request_execute =_ "%s: failed request start (0x%x)\012"
drivers/scsi/isci/request.c:3449 [isci]isci_request_execute =_ "%s: request_construct failed - status = 0x%x\012"
drivers/scsi/isci/request.c:3388 [isci]isci_io_request_build =_ "%s: unknown protocol\012"
drivers/scsi/isci/request.c:3369 [isci]isci_io_request_build =_ "%s: failed request construct\012"
drivers/scsi/isci/request.c:3339 [isci]isci_io_request_build =_ "%s: idev = 0x%p; request = %p, num_scatter = %d\012"
drivers/scsi/isci/request.c:3314 [isci]isci_smp_request_build =_ "%s: failed with status = %d\012"
drivers/scsi/isci/request.c:3151 [isci]isci_request_stp_request_construct =_ "%s: ireq = %p\012"
drivers/scsi/isci/request.c:3136 [isci]isci_request_ssp_request_construct =_ "%s: request = %p\012"
drivers/scsi/isci/request.c:2875 [isci]isci_request_io_request_complete =_ "%s: invalid completion code: 0x%x - isci_request = %p\012"
drivers/scsi/isci/request.c:2816 [isci]isci_request_io_request_complete =_ "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\012"
drivers/scsi/isci/request.c:2810 [isci]isci_request_io_request_complete =_ "%s: SCI_IO_SUCCESS\012"
drivers/scsi/isci/request.c:2805 [isci]isci_request_io_request_complete =_ "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\012"
drivers/scsi/isci/request.c:2749 [isci]isci_request_io_request_complete =_ "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\012"
drivers/scsi/isci/request.c:2738 [isci]isci_request_io_request_complete =_ "%s: request = %p, task = %p, task->data_dir = %d completion_status = 0x%x\012"
drivers/scsi/isci/request.c:2527 [isci]isci_request_handle_controller_specific_errors =_ "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR - controller status = 0x%x\012"
drivers/scsi/isci/request.c:2461 [isci]isci_request_process_response_iu =_ "%s: resp_iu = %p resp_iu->status = 0x%x,\012resp_iu->datapres = %d resp_iu->response_data_len = %x, resp_iu->sense_data_len = %x\012response data: "
drivers/scsi/isci/request.c:1954 [isci]sci_io_request_frame_handler =_ "%s: SCIC PIO Request 0x%p received D2H Register FIS with BSY status 0x%x\012"
drivers/scsi/isci/remote_device.c:1676 [isci]isci_remote_device_suspend_terminate =_ "%s: isci_remote_device_terminate_requests(%p) returned %d!\012"
drivers/scsi/isci/remote_device.c:1642 [isci]isci_remote_device_found =_ "%s: isci_device = %p\012"
drivers/scsi/isci/remote_device.c:1621 [isci]isci_remote_device_found =_ "%s: domain_device = %p\012"
drivers/scsi/isci/remote_device.c:1597 [isci]isci_remote_device_gone =_ "%s: domain_device = %p, isci_device = %p, isci_port = %p\012"
drivers/scsi/isci/remote_device.c:1581 [isci]isci_remote_device_stop =_ "%s: isci_device = %p, waiting done.\012"
drivers/scsi/isci/remote_device.c:1564 [isci]isci_remote_device_stop =_ "%s: isci_device = %p\012"
drivers/scsi/isci/remote_device.c:1488 [isci]isci_remote_device_construct =_ "%s: construct failed: %d\012"
drivers/scsi/isci/remote_device.c:1405 [isci]isci_remote_device_wait_for_resume_from_abort =_ "%s: resume wait done: %p\012"
drivers/scsi/isci/remote_device.c:1392 [isci]isci_remote_device_wait_for_resume_from_abort =_ "%s: starting resume wait: %p\012"
drivers/scsi/isci/remote_device.c:1361 [isci]isci_remote_device_resume_from_abort_complete =_ "%s: passing-along resume: %p\012"
drivers/scsi/isci/remote_device.c:1349 [isci]sci_remote_device_resume =_ "%s: failed to resume: %d\012"
drivers/scsi/isci/remote_device.c:1126 [isci]sci_remote_device_resetting_state_exit =_ "%s: isci_device = %p\012"
drivers/scsi/isci/remote_device.c:1115 [isci]sci_remote_device_resetting_state_enter =_ "%s: isci_device = %p\012"
drivers/scsi/isci/remote_device.c:1044 [isci]isci_remote_device_deconstruct =_ "%s: isci_device = %p\012"
drivers/scsi/isci/remote_device.c:599 [isci]sci_remote_device_event_handler =_ "%s: device: %p event code: %x: %s\012"
drivers/scsi/isci/remote_device.c:588 [isci]sci_remote_device_event_handler =_ "%s: device: %p event code: %x: %s\012"
drivers/scsi/isci/remote_device.c:301 [isci]isci_remote_device_not_ready =_ "%s: isci_device = %p; reason = %d\012"
drivers/scsi/isci/remote_device.c:280 [isci]isci_remote_device_terminate_requests =_ "%s: idev=%p, wait done\012"
drivers/scsi/isci/remote_device.c:262 [isci]isci_remote_device_terminate_requests =_ "%s: ******* Timeout waiting for suspend; idev=%p, current state %s; started_request_count=%d, flags=%lx\012\011rnc_suspend_count=%d, RNC: current state %s, rnc.suspend_count=%d, current suspend_type %x dest state %d\012"
drivers/scsi/isci/remote_device.c:229 [isci]isci_remote_device_terminate_requests =_ "%s: ******* Timeout waiting for suspend; idev=%p, current state %s; started_request_count=%d, flags=%lx\012\011rnc_suspend_count=%d, rnc.suspend_count=%d RNC: current state %s, current suspend_type %x dest state %d;\012ireq=%p, ireq->flags = %lx\012"
drivers/scsi/isci/remote_device.c:209 [isci]isci_remote_device_terminate_requests =_ "%s: idev=%p, ireq=%p; started_request_count=%d, rnc_suspend_count=%d, rnc.suspend_count=%dabout to wait\012"
drivers/scsi/isci/remote_device.c:198 [isci]isci_remote_device_terminate_requests =_ "%s: failed isci_get_device(idev=%p)\012"
drivers/scsi/isci/remote_device.c:112 [isci]sci_remote_device_terminate_req =_ "%s: idev=%p; flags=%lx; req=%p; req target=%p\012"
drivers/scsi/isci/remote_device.c:92 [isci]isci_remote_device_ready =_ "%s: idev = %p\012"
drivers/scsi/isci/port.c:1743 [isci]isci_port_deformed =_ "%s: port: %ld\012"
drivers/scsi/isci/port.c:1672 [isci]isci_port_perform_hard_reset =_ "%s: iport = %p; hard reset completion\012"
drivers/scsi/isci/port.c:1658 [isci]isci_port_perform_hard_reset =_ "%s: iport = %p\012"
drivers/scsi/isci/port.c:1520 [isci]sci_port_ready_state_enter =_ "%s: port%d !ready\012"
drivers/scsi/isci/port.c:1051 [isci]sci_port_ready_substate_configuring_enter =_ "%s: port%d !ready\012"
drivers/scsi/isci/port.c:1038 [isci]sci_port_ready_substate_operational_exit =_ "%s: port%d !ready\012"
drivers/scsi/isci/port.c:971 [isci]sci_port_ready_substate_operational_enter =_ "%s: port%d ready\012"
drivers/scsi/isci/port.c:805 [isci]port_timeout =_ "%s: port%d: stop complete timeout\012"
drivers/scsi/isci/port.c:321 [isci]isci_port_hard_reset_complete =_ "%s: isci_port = %p, completion_status=%x\012"
drivers/scsi/isci/port.c:277 [isci]isci_port_link_down =_ "%s: isci_port = %p - Done\012"
drivers/scsi/isci/port.c:262 [isci]isci_port_link_down =_ "%s: isci_device = %p\012"
drivers/scsi/isci/port.c:246 [isci]isci_port_link_down =_ "%s: isci_port = %p\012"
drivers/scsi/isci/port.c:180 [isci]isci_port_link_up =_ "%s: isci_port = %p\012"
drivers/scsi/isci/port.c:163 [isci]isci_port_bc_change_received =_ "%s: isci_phy = %p, sas_phy = %p\012"
drivers/scsi/isci/host.c:2641 [isci]sci_controller_terminate_request =_ "%s: status=%d; ireq=%p; flags=%lx\012"
drivers/scsi/isci/host.c:2452 [isci]sci_controller_post_request =_ "%s[%d]: %#x\012"
drivers/scsi/isci/host.c:2438 [isci]sci_controller_remote_device_stopped =_ "SCIC Controller 0x%p remote device stopped event from device 0x%p in unexpected state %d\012"
drivers/scsi/isci/host.c:2412 [isci]sci_controller_link_down =_ "%s: SCIC Controller linkdown event from phy %d in unexpected state %d\012"
drivers/scsi/isci/host.c:2395 [isci]sci_controller_link_up =_ "%s: SCIC Controller linkup event from phy %d in unexpected state %d\012"
drivers/scsi/isci/host.c:1090 [isci]ireq_done =_ "%s: Error - ireq/task = %p/%p\012"
drivers/scsi/isci/host.c:1084 [isci]ireq_done =_ "%s: Normal - ireq/task = %p/%p\012"
drivers/scsi/isci/host.c:572 [isci]sci_controller_process_completions =_ "%s: completion queue ending get:0x%08x\012"
drivers/scsi/isci/host.c:517 [isci]sci_controller_process_completions =_ "%s: completion queue entry:0x%08x\012"
drivers/scsi/isci/host.c:492 [isci]sci_controller_process_completions =_ "%s: completion queue beginning get:0x%08x\012"
drivers/scsi/isci/task.c:756 [isci]isci_reset_device =_ "%s: idev %p complete, reset_stat=%d.\012"
drivers/scsi/isci/task.c:730 [isci]isci_reset_device =_ "%s: idev %p\012"
drivers/scsi/isci/task.c:684 [isci]isci_task_request_complete =_ "%s: request = %p, status=%d\012"
drivers/scsi/isci/task.c:429 [isci]isci_task_lu_reset =_ "%s: No dev\012"
drivers/scsi/isci/task.c:423 [isci]isci_task_lu_reset =_ "%s: domain_device=%p, isci_host=%p; isci_device=%p\012"
drivers/scsi/isci/task.c:405 [isci]isci_task_send_lu_reset_sas =_ "%s: %p: TMF_LU_RESET failed (%x)\012"
drivers/scsi/isci/task.c:401 [isci]isci_task_send_lu_reset_sas =_ "%s: %p: TMF_LU_RESET passed\012"
drivers/scsi/isci/task.c:387 [isci]isci_task_send_lu_reset_sas =_ "%s: isci_host = %p, isci_device = %p\012"
drivers/scsi/isci/task.c:342 [isci]isci_task_execute_tmf =_ "%s: completed request = %p\012"
drivers/scsi/isci/task.c:334 [isci]isci_task_execute_tmf =_ "%s: tmf.status == SCI_FAILURE_IO_RESPONSE_VALID\012"
drivers/scsi/isci/task.c:305 [isci]isci_task_execute_tmf =_ "%s: start_io failed - status = 0x%x, request = %p\012"
drivers/scsi/isci/task.c:287 [isci]isci_task_execute_tmf =_ "%s: idev = %p\012"
drivers/scsi/isci/task.c:281 [isci]isci_task_execute_tmf =_ "%s: idev = %p not ready (%#lx)\012"
drivers/scsi/isci/task.c:222 [isci]isci_task_request_build =_ "%s: isci_tmf = %p\012"
drivers/scsi/isci/task.c:139 [isci]isci_task_execute_task =_ "task: %p, dev: %p idev: %p:%#lx cmd = %p\012"
drivers/scsi/isci/task.c:84 [isci]isci_task_refuse =_ "%s: task = %p, response=%d, status=%d\012"
drivers/scsi/isci/task.h:111 [isci]isci_print_tmf =_ "%s: status = %x\012tmf->resp.resp_iu.data_present = %x\012tmf->resp.resp_iu.status = %x\012tmf->resp.resp_iu.data_length = %x\012tmf->resp.resp_iu.data[0] = %x\012tmf->resp.resp_iu.data[1] = %x\012tmf->resp.resp_iu.data[2] = %x\012tmf->resp.resp_iu.data[3] = %x\012"
drivers/scsi/isci/task.h:102 [isci]isci_print_tmf =_ "%s: status = %x\012tmf->resp.d2h_fis.status = %x\012tmf->resp.d2h_fis.error = %x\012"
drivers/scsi/isci/remote_node_context.c:762 [isci]sci_remote_node_context_start_io =_ "%s: invalid state %s\012"
drivers/scsi/isci/remote_node_context.c:663 [isci]sci_remote_node_context_resume =_ "%s: state %s, cb_fn = %p, cb_p = %p; dest_state = %d; dev resume path %s\012"
drivers/scsi/isci/remote_node_context.c:575 [isci]sci_remote_node_context_suspend =_ "%s: current state %s, current suspend_type %x dest state %d, arg suspend_reason %d, arg suspend_type %x"
drivers/scsi/libsas/sas_port.c:283 [libsas]sas_porte_broadcast_rcvd =p "broadcast received: %d\012"
drivers/scsi/libsas/sas_port.c:168 [libsas]sas_form_port =p "%s added to %s, phy_mask:0x%x (%016llx)\012"
drivers/scsi/libsas/sas_port.c:113 [libsas]sas_form_port =p "phy%d matched wide port%d\012"
drivers/scsi/libsas/sas_discover.c:514 [libsas]sas_revalidate_domain =p "done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\012"
drivers/scsi/libsas/sas_discover.c:508 [libsas]sas_revalidate_domain =p "REVALIDATING DOMAIN on port %d, pid:%d\012"
drivers/scsi/libsas/sas_discover.c:501 [libsas]sas_revalidate_domain =p "REVALIDATION DEFERRED on port %d, pid:%d\012"
drivers/scsi/libsas/sas_discover.c:486 [libsas]sas_discover_domain =p "DONE DISCOVERY on port %d, pid:%d, result:%d\012"
drivers/scsi/libsas/sas_discover.c:446 [libsas]sas_discover_domain =p "DOING DISCOVERY on port %d, pid:%d\012"
drivers/scsi/libsas/sas_expander.c:2083 [libsas]sas_rediscover =p "ex %016llx phy%02d originated BROADCAST(CHANGE)\012"
drivers/scsi/libsas/sas_expander.c:2047 [libsas]sas_rediscover_dev =p "ex %016llx phy%02d broadcast flutter%s\012"
drivers/scsi/libsas/sas_expander.c:2007 [libsas]sas_rediscover_dev =p "ex %016llx rediscovering phy%02d%s\012"
drivers/scsi/libsas/sas_expander.c:1956 [libsas]sas_discover_new =p "ex %016llx phy%02d new device attached\012"
drivers/scsi/libsas/sas_expander.c:1537 [libsas]sas_configure_parent =p "ex %016llx has self-configuring routing table\012"
drivers/scsi/libsas/sas_expander.c:1088 [libsas]sas_ex_discover_dev =p "second fanout expander %016llx phy%02d attached to ex %016llx phy%02d\012"
drivers/scsi/libsas/sas_expander.c:1076 [libsas]sas_ex_discover_dev =p "Attaching ex phy%02d to wide port %016llx\012"
drivers/scsi/libsas/sas_expander.c:561 [libsas]sas_ex_manuf_info =p "MI ex %016llx returned SMP result:0x%x\012"
drivers/scsi/libsas/sas_expander.c:502 [libsas]sas_ex_general =p "RG: ex %016llx self-configuring...\012"
drivers/scsi/libsas/sas_expander.c:493 [libsas]sas_ex_general =p "RG:ex %016llx returned SMP result:0x%x\012"
drivers/scsi/libsas/sas_expander.c:336 [libsas]sas_set_ex_phy =p "%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\012"
drivers/scsi/libsas/sas_scsi_host.c:683 [libsas]sas_eh_handle_sas_errors =p "--- Exit %s -- clear_q\012"
drivers/scsi/libsas/sas_scsi_host.c:657 [libsas]sas_eh_handle_sas_errors =p "clear nexus ha\012"
drivers/scsi/libsas/sas_scsi_host.c:644 [libsas]sas_eh_handle_sas_errors =p "clearing nexus for port:%d\012"
drivers/scsi/libsas/sas_scsi_host.c:599 [libsas]sas_eh_handle_sas_errors =p "trying to find task 0x%p\012"
drivers/scsi/libsas/sas_scsi_host.c:292 [libsas]sas_scsi_find_task =p "%s: task 0x%p is done\012"
drivers/scsi/libsas/sas_scsi_host.c:193 [libsas]sas_queuecommand =p "lldd_execute_task returned: %d\012"
drivers/scsi/libsas/sas_scsi_host.c:122 [libsas]sas_scsi_task_done =p "task_done called with non existing SCSI cmnd!\012"
drivers/scsi/libsas/sas_scsi_host.c:117 [libsas]sas_scsi_task_done =p "task done but aborted\012"
drivers/scsi/scsi_pm.c:285 [scsi_mod]scsi_runtime_idle =_ "scsi_runtime_idle\012"
drivers/scsi/scsi_pm.c:274 [scsi_mod]scsi_runtime_resume =_ "scsi_runtime_resume\012"
drivers/scsi/scsi_pm.c:247 [scsi_mod]scsi_runtime_suspend =_ "scsi_runtime_suspend\012"
drivers/scsi/scsi_pm.c:80 [scsi_mod]scsi_dev_type_resume =_ "scsi resume: %d\012"
drivers/scsi/scsi_pm.c:68 [scsi_mod]scsi_dev_type_suspend =_ "scsi suspend: %d\012"
drivers/dma-buf/dma-buf.c:1468 [dma_buf]dma_buf_init_debugfs =_ "dma_buf: debugfs: failed to create node bufinfo\012"
drivers/dax/super.c:571 [dax]alloc_dax =_ "%s: error: device does not provide dax operation zero_page_range()\012"
drivers/dax/super.c:141 [dax]generic_fsdax_supported =_ "%pg: error: dax unsupported by block device\012"
drivers/dax/bus.c:1133 [dax]dev_dax_validate_align =_ "%s: align %u invalid for range %d\012"
drivers/dax/bus.c:1037 [dax]size_store =_ "%s: size: %lld misaligned\012"
drivers/dax/bus.c:856 [dax]adjust_dev_dax_range =_ "%s range[%d]: %#llx:%#llx\012"
drivers/dax/bus.c:815 [dax]alloc_dev_dax_range =_ "alloc range[%d]: %pa:%pa\012"
drivers/dax/bus.c:625 [dax]unregister_dax_mapping =_ "%s\012"
drivers/dax/bus.c:397 [dax]unregister_dev_dax =_ "%s\012"
drivers/dax/bus.c:376 [dax]trim_dev_dax_range =_ "delete range[%d]: %#llx:%#llx\012"
drivers/mfd/mfd-core.c:54 [mfd_core]mfd_cell_disable =_ "No .disable() call-back registered\012"
drivers/mfd/mfd-core.c:41 [mfd_core]mfd_cell_enable =_ "No .enable() call-back registered\012"
drivers/base/pinctrl.c:80 [pinctrl]pinctrl_bind_pins =_ "no idle pinctrl state\012"
drivers/base/pinctrl.c:74 [pinctrl]pinctrl_bind_pins =_ "no sleep pinctrl state\012"
drivers/base/pinctrl.c:60 [pinctrl]pinctrl_bind_pins =_ "failed to activate initial pinctrl state\012"
drivers/base/pinctrl.c:51 [pinctrl]pinctrl_bind_pins =_ "no init pinctrl state\012"
drivers/base/pinctrl.c:42 [pinctrl]pinctrl_bind_pins =_ "no default pinctrl state\012"
drivers/base/pinctrl.c:34 [pinctrl]pinctrl_bind_pins =_ "no pinctrl handle\012"
drivers/base/regmap/regmap-debugfs.c:561 [regmap_debugfs]regmap_debugfs_init =_ "regmap locking disabled - not creating debugfs entries\012"
drivers/base/regmap/regcache.c:750 [regcache]regcache_sync_block_raw_flush =_ "Writing %zu bytes for %d registers from 0x%x-0x%x\012"
drivers/base/regmap/regcache.c:732 [regcache]regcache_sync_block_single =_ "Synced register %#x, value %#x\012"
drivers/base/regmap/regcache.c:458 [regcache]regcache_sync_region =_ "Syncing %s cache from %d-%d\012"
drivers/base/regmap/regcache.c:360 [regcache]regcache_sync =_ "Syncing %s cache\012"
drivers/base/regmap/regcache.c:322 [regcache]regcache_default_sync =_ "Synced register %#x, value %#x\012"
drivers/base/regmap/regcache.c:218 [regcache]regcache_exit =_ "Destroying %s cache\012"
drivers/base/regmap/regcache.c:190 [regcache]regcache_init =_ "Initializing %s cache\012"
drivers/base/regmap/regmap.c:1742 [regmap]_regmap_raw_write_impl =_ "Writing window %d/%zu\012"
drivers/base/firmware_loader/main.c:741 [firmware_class]_request_firmware_prepare =_ "using built-in %s\012"
drivers/base/firmware_loader/main.c:597 [firmware_class]fw_set_page_data =_ "%s: fw-%s fw_priv=%p data=%p size=%u\012"
drivers/base/firmware_loader/main.c:565 [firmware_class]fw_get_filesystem_firmware =_ "direct-loading %s\012"
drivers/base/firmware_loader/main.c:554 [firmware_class]fw_get_filesystem_firmware =_ "f/w decompressing %s\012"
drivers/base/firmware_loader/main.c:552 [firmware_class]fw_get_filesystem_firmware =_ "Loading firmware from %s\012"
drivers/base/firmware_loader/main.c:545 [firmware_class]fw_get_filesystem_firmware =_ "loading %s failed for no such file or directory.\012"
drivers/base/firmware_loader/main.c:271 [firmware_class]__free_fw_priv =_ "%s: fw-%s fw_priv=%p data=%p size=%u\012"
drivers/base/firmware_loader/main.c:247 [firmware_class]alloc_lookup_fw_priv =_ "batched request - sharing the same struct fw_priv and lookup for multiple requests\012"
drivers/base/firmware_loader/main.c:209 [firmware_class]__allocate_fw_priv =_ "%s: fw-%s fw_priv=%p\012"
drivers/base/firmware_loader/fallback.c:657 [firmware_class]firmware_fallback_sysfs =_ "Falling back to sysfs fallback for: %s\012"
drivers/base/firmware_loader/fallback.c:563 [firmware_class]fw_load_from_user_helper =_ "firmware: %s loading timed out\012"
drivers/base/firmware_loader/fallback.c:525 [firmware_class]fw_load_sysfs_fallback =_ "firmware: requesting %s\012"
drivers/base/power/clock_ops.c:691 [clock_ops]pm_clk_runtime_resume =_ "%s\012"
drivers/base/power/clock_ops.c:668 [clock_ops]pm_clk_runtime_suspend =_ "%s\012"
drivers/base/power/clock_ops.c:630 [clock_ops]pm_clk_notify =_ "%s() %ld\012"
drivers/base/power/clock_ops.c:588 [clock_ops]pm_clk_resume =_ "%s()\012"
drivers/base/power/clock_ops.c:550 [clock_ops]pm_clk_suspend =_ "%s()\012"
drivers/base/power/clock_ops.c:191 [clock_ops]pm_clk_acquire =_ "Clock %pC con_id %s managed by runtime PM.\012"
drivers/base/power/wakeup.c:346 [wakeup]device_wakeup_enable =_ "Suspicious %s() during system transition!\012"
drivers/base/power/main.c:442 [main]pm_dev_dbg =_ "PM: %s%s%s driver flags: %x\012"
drivers/base/power/main.c:203 [main]device_pm_move_last =_ "Moving %s:%s to end of list\012"
drivers/base/power/main.c:190 [main]device_pm_move_after =_ "Moving %s:%s after %s:%s\012"
drivers/base/power/main.c:176 [main]device_pm_move_before =_ "Moving %s:%s before %s:%s\012"
drivers/base/power/main.c:157 [main]device_pm_remove =_ "Removing info for %s:%s\012"
drivers/base/power/main.c:136 [main]device_pm_add =_ "Adding info for %s:%s\012"
drivers/base/platform.c:1060 [platform]platform_unregister_drivers =_ "unregistering platform driver %ps\012"
drivers/base/platform.c:1039 [platform]__platform_register_drivers =_ "unregistering platform driver %ps\012"
drivers/base/platform.c:1025 [platform]__platform_register_drivers =_ "registering platform driver %ps\012"
drivers/base/platform.c:709 [platform]platform_device_add =_ "Registering platform device '%s'. Parent at %s\012"
drivers/base/class.c:213 [class]class_create_release =_ "%s called for %s\012"
drivers/base/class.c:206 [class]class_unregister =_ "device class '%s': unregistering\012"
drivers/base/class.c:158 [class]__class_register =_ "device class '%s': registering\012"
drivers/base/class.c:59 [class]class_release =_ "class '%s' does not have a release() function, be careful\012"
drivers/base/class.c:54 [class]class_release =_ "class '%s': release.\012"
drivers/base/dd.c:1150 [dd]__driver_attach =_ "probing driver %s asynchronously\012"
drivers/base/dd.c:1134 [dd]__driver_attach =_ "Bus failed to match device: %d\012"
drivers/base/dd.c:1125 [dd]__driver_attach =_ "Device match requests probe deferral\012"
drivers/base/dd.c:1099 [dd]__driver_attach_async_helper =_ "driver %s async attach completed: %d\012"
drivers/base/dd.c:989 [dd]__device_attach =_ "scheduling asynchronous probe\012"
drivers/base/dd.c:937 [dd]__device_attach_async_helper =_ "async probe completed\012"
drivers/base/dd.c:891 [dd]__device_attach_driver =_ "Bus failed to match device: %d\012"
drivers/base/dd.c:882 [dd]__device_attach_driver =_ "Device match requests probe deferral\012"
drivers/base/dd.c:744 [dd]__driver_probe_device =_ "bus: '%s': %s: matched device %s with driver %s\012"
drivers/base/dd.c:713 [dd]driver_probe_done =_ "%s: probe_count = %d\012"
drivers/base/dd.c:650 [dd]really_probe =_ "bus: '%s': %s: bound device %s to driver %s\012"
drivers/base/dd.c:560 [dd]really_probe =_ "bus: '%s': %s: probing driver %s with device %s\012"
drivers/base/dd.c:552 [dd]really_probe =_ "Driver %s force probe deferral\012"
drivers/base/dd.c:527 [dd]call_driver_probe =_ "%s: probe of %s rejects match %d\012"
drivers/base/dd.c:523 [dd]call_driver_probe =_ "Driver %s requests probe deferral\012"
drivers/base/dd.c:381 [dd]driver_bound =_ "driver: '%s': %s: bound to device '%s'\012"
drivers/base/dd.c:148 [dd]driver_deferred_probe_del =_ "Removed from deferred list\012"
drivers/base/dd.c:138 [dd]driver_deferred_probe_add =_ "Added to deferred list\012"
drivers/base/dd.c:121 [dd]deferred_probe_work_func =_ "Retrying from deferred list\012"
drivers/base/bus.c:874 [bus]bus_unregister =_ "bus: '%s': unregistering\012"
drivers/base/bus.c:843 [bus]bus_register =_ "bus: '%s': registered\012"
drivers/base/bus.c:678 [bus]bus_remove_driver =_ "bus: '%s': remove driver %s\012"
drivers/base/bus.c:602 [bus]bus_add_driver =_ "bus: '%s': add driver %s\012"
drivers/base/bus.c:529 [bus]bus_remove_device =_ "bus: '%s': remove device %s\012"
drivers/base/bus.c:449 [bus]bus_add_device =_ "bus: '%s': add device %s\012"
drivers/base/bus.c:90 [bus]driver_release =_ "driver: '%s': %s\012"
drivers/base/core.c:4751 [core]dev_err_probe =_ "error %pe: %pV"
drivers/base/core.c:4327 [core]device_move =_ "device: '%s': %s: moving to '%s'\012"
drivers/base/core.c:4258 [core]device_rename =_ "renaming to %s\012"
drivers/base/core.c:4062 [core]device_create_release =_ "device: '%s': %s\012"
drivers/base/core.c:3632 [core]device_unregister =_ "device: '%s': %s\012"
drivers/base/core.c:3330 [core]device_add =_ "device: '%s': %s\012"
drivers/base/core.c:2757 [core]devices_kset_move_last =_ "devices_kset: Moving %s to end of list\012"
drivers/base/core.c:2742 [core]devices_kset_move_after =_ "devices_kset: Moving %s after %s\012"
drivers/base/core.c:2726 [core]devices_kset_move_before =_ "devices_kset: Moving %s before %s\012"
drivers/base/core.c:2526 [core]devm_attr_groups_remove =_ "%s: removing groups %p\012"
drivers/base/core.c:2517 [core]devm_attr_group_remove =_ "%s: removing group %p\012"
drivers/base/core.c:2363 [core]dev_uevent =_ "device: '%s': %s: dev_type uevent() returned %d\012"
drivers/base/core.c:2354 [core]dev_uevent =_ "device: '%s': %s: class uevent() returned %d\012"
drivers/base/core.c:2346 [core]dev_uevent =_ "device: '%s': %s: bus uevent() returned %d\012"
drivers/base/core.c:1650 [core]fw_devlink_relax_link =_ "Relaxing link with %s\012"
drivers/base/core.c:902 [core]__device_link_del =_ "Dropping the link to %s\012"
drivers/base/core.c:885 [core]device_link_add =_ "Linked as a consumer to %s\012"
drivers/base/core.c:869 [core]device_link_add =_ "Linked as a sync state only consumer to %s\012"
drivers/base/core.c:115 [core]__fwnode_link_del =_ "%pfwP Dropping the fwnode link to %pfwP\012"
drivers/base/core.c:99 [core]fwnode_link_add =_ "%pfwP Linked as a fwnode consumer to %pfwP\012"
drivers/base/component.c:672 [component]__component_add =_ "adding component (ops %ps)\012"
drivers/base/component.c:585 [component]component_bind =_ "binding %s (ops %ps)\012"
drivers/base/component.c:244 [component]try_to_bring_up_master =_ "master is not for this component (%s)\012"
drivers/base/component.c:239 [component]try_to_bring_up_master =_ "master has incomplete components\012"
drivers/base/component.c:236 [component]try_to_bring_up_master =_ "trying to bring up master\012"
drivers/base/component.c:203 [component]find_components =_ "found component %s, duplicate %u\012"
drivers/base/component.c:192 [component]find_components =_ "Looking for component %zu\012"
drivers/gpu/vga/vgaarb.c:1401 [vgaarb]pci_notify =_ "vgaarb: %s\012"
drivers/gpu/vga/vgaarb.c:1347 [vgaarb]vga_arb_release =_ "vgaarb: uc->io_cnt == %d, uc->mem_cnt == %d\012"
drivers/gpu/vga/vgaarb.c:1339 [vgaarb]vga_arb_release =_ "%s\012"
drivers/gpu/vga/vgaarb.c:1310 [vgaarb]vga_arb_open =_ "%s\012"
drivers/gpu/vga/vgaarb.c:1299 [vgaarb]vga_arb_fpoll =_ "%s\012"
drivers/gpu/vga/vgaarb.c:1274 [vgaarb]vga_arb_write =_ "client 0x%p called 'decodes'\012"
drivers/gpu/vga/vgaarb.c:1258 [vgaarb]vga_arb_write =_ "vgaarb: maximum user cards (%d) number reached, ignoring this one!\012"
drivers/gpu/vga/vgaarb.c:1238 [vgaarb]vga_arb_write =_ "vgaarb: not a VGA device\012"
drivers/gpu/vga/vgaarb.c:1235 [vgaarb]vga_arb_write =_ "vgadev %p\012"
drivers/gpu/vga/vgaarb.c:1229 [vgaarb]vga_arb_write =_ "%s ==> %04x:%02x:%02x.%x pdev %p\012"
drivers/gpu/vga/vgaarb.c:1222 [vgaarb]vga_arb_write =_ "invalid PCI address %04x:%02x:%02x.%x\012"
drivers/gpu/vga/vgaarb.c:1210 [vgaarb]vga_arb_write =_ "client 0x%p called 'target'\012"
drivers/gpu/vga/vgaarb.c:1167 [vgaarb]vga_arb_write =_ "client 0x%p called 'trylock'\012"
drivers/gpu/vga/vgaarb.c:1111 [vgaarb]vga_arb_write =_ "client 0x%p called 'unlock'\012"
drivers/gpu/vga/vgaarb.c:1075 [vgaarb]vga_arb_write =_ "client 0x%p called 'lock'\012"
drivers/gpu/vga/vgaarb.c:790 [vgaarb]vga_update_device_decodes =_ "vgaarb: decoding count now is: %d\012"
drivers/gpu/vga/vgaarb.c:376 [vgaarb]__vga_put =_ "vgaarb: %s\012"
drivers/gpu/vga/vgaarb.c:252 [vgaarb]__vga_tryget =_ "vgaarb: %s: owns: %d\012"
drivers/gpu/vga/vgaarb.c:251 [vgaarb]__vga_tryget =_ "vgaarb: %s: %d\012"
drivers/iommu/virtio-iommu.c:298 [virtio_iommu]viommu_send_req_sync =_ "could not sync requests (%d)\012"
drivers/iommu/virtio-iommu.c:292 [virtio_iommu]viommu_send_req_sync =_ "could not add request (%d)\012"
drivers/iommu/virtio-iommu.c:272 [virtio_iommu]viommu_add_req =_ "could not add request: %d\012"
drivers/iommu/virtio-iommu.c:195 [virtio_iommu]viommu_sync_req =_ "could not sync requests (%d)\012"
drivers/iommu/intel/iommu.c:2102 [iommu]domain_context_mapping_one =_ "Set context mapping for %02x:%02x.%d\012"
drivers/iommu/intel/iommu.c:1808 [iommu]iommu_init_domains =_ "%s: Number of Domains supported <%d>\012"
drivers/iommu/intel/iommu.c:1471 [iommu]__iommu_flush_iotlb =_ "TLB flush request %Lx, actual %Lx\012"
drivers/iommu/iommu.c:2630 [iommu]__iommu_unmap =_ "unmapped: iova 0x%lx size 0x%zx\012"
drivers/iommu/iommu.c:2617 [iommu]__iommu_unmap =_ "unmap this: iova 0x%lx size 0x%zx\012"
drivers/iommu/iommu.c:2517 [iommu]__iommu_map =_ "map: iova 0x%lx pa %pa size 0x%zx\012"
drivers/iommu/iommu.c:2472 [iommu]__iommu_map_pages =_ "mapping: iova 0x%lx pa %pa pgsize 0x%zx count %zu\012"
drivers/iommu/iommu.c:670 [iommu]iommu_group_alloc =_ "Allocated group %d\012"
drivers/iommu/iommu.c:584 [iommu]iommu_group_release =_ "Releasing group %d\012"
drivers/iommu/intel/dmar.c:606 [dmar]dmar_walk_remapping_entries =_ "Unknown DMAR structure type %d\012"
drivers/iommu/intel/dmar.c:593 [dmar]dmar_walk_remapping_entries =_ "[Firmware Bug]: Invalid 0-length structure\012"
drivers/iommu/amd/iommu.c:3394 [iommu]amd_ir_set_vcpu_affinity =_ "%s: Fall back to using intr legacy remap\012"
drivers/iommu/amd/iommu.c:716 [iommu]iommu_poll_ga_log =_ "%s: devid=%#x, ga_tag=%#x\012"
drivers/char/tpm/tpm_crb.c:601 [tpm_crb]crb_map_io =_ "cmd_hi = %X cmd_low = %X cmd_size %X\012"
drivers/char/tpm/tpm_tis_core.c:1093 [tpm_tis_core]tpm_tis_core_init =_ "\011Data Avail Int Support\012"
drivers/char/tpm/tpm_tis_core.c:1091 [tpm_tis_core]tpm_tis_core_init =_ "\011Sts Valid Int Support\012"
drivers/char/tpm/tpm_tis_core.c:1089 [tpm_tis_core]tpm_tis_core_init =_ "\011Locality Change Int Support\012"
drivers/char/tpm/tpm_tis_core.c:1087 [tpm_tis_core]tpm_tis_core_init =_ "\011Interrupt Level High\012"
drivers/char/tpm/tpm_tis_core.c:1085 [tpm_tis_core]tpm_tis_core_init =_ "\011Interrupt Level Low\012"
drivers/char/tpm/tpm_tis_core.c:1083 [tpm_tis_core]tpm_tis_core_init =_ "\011Interrupt Edge Rising\012"
drivers/char/tpm/tpm_tis_core.c:1081 [tpm_tis_core]tpm_tis_core_init =_ "\011Interrupt Edge Falling\012"
drivers/char/tpm/tpm_tis_core.c:1079 [tpm_tis_core]tpm_tis_core_init =_ "\011Command Ready Int Support\012"
drivers/char/tpm/tpm_tis_core.c:1077 [tpm_tis_core]tpm_tis_core_init =_ "\011Burst Count Static\012"
drivers/char/tpm/tpm_tis_core.c:1074 [tpm_tis_core]tpm_tis_core_init =_ "TPM interface capabilities (0x%x):\012"
drivers/char/tpm/tpm-dev.c:29 [tpm]tpm_open =_ "Another process owns this TPM\012"
drivers/char/tpm/tpm2-space.c:298 [tpm]tpm_find_and_validate_cc =_ "%s: insufficient command length %zu"
drivers/char/tpm/tpm2-space.c:285 [tpm]tpm_find_and_validate_cc =_ "0x%04X is an invalid command\012"
drivers/char/tpm/eventlog/common.c:81 [tpm]tpm_read_log =_ "%s: ERROR - event log already initialized\012"
drivers/tty/serial/8250/8250_exar.c:735 [8250_exar]exar_pci_probe =_ "Setup PCI port: port %lx, irq %d, type %d\012"
drivers/tty/serial/8250/8250_pci.c:4349 [8250_pci]pciserial_init_ports =_ "Setup PCI port: port %lx, irq %d, type %d\012"
drivers/tty/serial/8250/8250_pci.c:4331 [8250_pci]pciserial_init_ports =_ "Using legacy interrupts\012"
drivers/tty/serial/8250/8250_pci.c:4326 [8250_pci]pciserial_init_ports =_ "Using MSI(-X) interrupts\012"
drivers/tty/serial/8250/8250_pci.c:1869 [8250_pci]skip_tx_en_setup =_ "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\012"
drivers/tty/serial/8250/8250_pci.c:1712 [8250_pci]pci_fintek_setup =_ "idx=%d iobase=0x%x"
drivers/tty/serial/8250/8250_pci.c:1041 [8250_pci]pci_oxsemi_tornado_init =_ "%d ports detected on %s PCI Express device\012"
drivers/tty/serial/8250/8250_pci.c:243 [8250_pci]pci_inteli960ni_init =_ "Local i960 firmware missing\012"
drivers/tty/serial/8250/8250_port.c:2376 [8250_base]serial8250_do_startup =_ "enabling bad tx status workarounds\012"
drivers/tty/serial/8250/8250_port.c:1744 [8250_base]serial8250_read_char =_ "handling break\012"
drivers/tty/serial/8250/8250_dma.c:313 [8250_base]serial8250_release_dma =_ "dma channels released\012"
drivers/tty/serial/8250/8250_dma.c:280 [8250_base]serial8250_request_dma =_ "got both dma channels\012"
drivers/tty/serial/8250/8250_dwlib.c:93 [8250_base]dw8250_setup_port =_ "Designware UART version %c.%c%c\012"
drivers/tty/serial/8250/8250_core.c:312 [8250]univ8250_setup_timer =_ "%s - using backup timer\012"
drivers/tty/serial/8250/8250_core.c:141 [8250]serial8250_interrupt =_ "%s(%d): end\012"
drivers/tty/serial/8250/8250_core.c:115 [8250]serial8250_interrupt =_ "%s(%d): start\012"
drivers/tty/serial/8250/8250_pnp.c:465 [8250]serial_pnp_probe =_ "Setup PNP port: port %#lx, mem %#llx, irq %u, type %u\012"
drivers/tty/serial/serial_core.c:1711 [serial_core]uart_hangup =_ "uart_hangup(%d)\012"
drivers/tty/serial/serial_core.c:1681 [serial_core]uart_wait_until_sent =_ "uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\012"
drivers/tty/serial/serial_core.c:1592 [serial_core]uart_close =_ "uart_close(%d) called\012"
drivers/tty/serial/serial_core.c:637 [serial_core]uart_flush_buffer =_ "uart_flush_buffer(%d) called\012"
drivers/tty/vt/vt_ioctl.c:1302 [vt_ioctl]vt_move_to_console =_ "Suspend: Can't switch VCs."
drivers/tty/tty_jobctrl.c:113 [tty_jobctrl]__proc_set_tty =_ "%s %s: current tty %s not NULL!!\012"
drivers/tty/tty_io.c:3230 [tty_io]tty_device_create_release =_ "releasing...\012"
drivers/tty/tty_io.c:1657 [tty_io]tty_release_checks =_ "%s %s: bad link = %p\012"
drivers/tty/tty_io.c:1652 [tty_io]tty_release_checks =_ "%s %s: bad other table[%d] = %p\012"
drivers/tty/tty_io.c:1644 [tty_io]tty_release_checks =_ "%s %s: bad driver table[%d] = %p\012"
drivers/tty/tty_io.c:1635 [tty_io]tty_release_checks =_ "%s %s: bad idx %d\012"
drivers/virtio/virtio_ring.c:2173 [virtio_ring]vring_interrupt =_ "virtqueue callback for %p (%p)\012"
drivers/virtio/virtio_ring.c:2162 [virtio_ring]vring_interrupt =_ "virtqueue interrupt with no work for %p\012"
drivers/virtio/virtio_ring.c:1456 [virtio_ring]virtqueue_get_buf_ctx_packed =_ "No more buffers in queue\012"
drivers/virtio/virtio_ring.c:1299 [virtio_ring]virtqueue_add_packed =_ "Added buffer head %i to %p\012"
drivers/virtio/virtio_ring.c:1226 [virtio_ring]virtqueue_add_packed =_ "Can't add buf len %i - avail = %i\012"
drivers/virtio/virtio_ring.c:1157 [virtio_ring]virtqueue_add_indirect_packed =_ "Added buffer head %i to %p\012"
drivers/virtio/virtio_ring.c:1080 [virtio_ring]virtqueue_add_indirect_packed =_ "Can't add buf len 1 - avail = 0\012"
drivers/virtio/virtio_ring.c:765 [virtio_ring]virtqueue_get_buf_ctx_split =_ "No more buffers in queue\012"
drivers/virtio/virtio_ring.c:626 [virtio_ring]virtqueue_add_split =_ "Added buffer head %i to %p\012"
drivers/virtio/virtio_ring.c:531 [virtio_ring]virtqueue_add_split =_ "Can't add buf len %i - avail = %i\012"
drivers/dma/dw/core.c:1262 [dw_dmac_core]do_dma_probe =_ "DWC_PARAMS[%d]: 0x%08x\012"
drivers/dma/dw/core.c:1162 [dw_dmac_core]do_dma_probe =_ "DW_PARAMS: 0x%08x\012"
drivers/dma/dw/core.c:1096 [dw_dmac_core]dwc_free_chan_resources =_ "%s: descs allocated=%u\012"
drivers/dma/dw/core.c:1062 [dw_dmac_core]dwc_alloc_chan_resources =_ "DMA channel not idle?\012"
drivers/dma/dw/core.c:563 [dw_dmac_core]dwc_prep_dma_memcpy =_ "%s: length is zero!\012"
drivers/dma/acpi-dma.c:455 [acpi_dma]acpi_dma_request_slave_chan_by_name =_ "Looking for DMA channel \042%s\042 at index %d...\012"
drivers/dma/acpi-dma.c:108 [acpi_dma]acpi_dma_parse_resource_group =_ "request line base: 0x%04x end: 0x%04x\012"
drivers/dma/acpi-dma.c:91 [acpi_dma]acpi_dma_parse_resource_group =_ "matches with %.4s%04X (rev %u)\012"
drivers/dma/virt-dma.c:59 [virt_dma]vchan_tx_desc_free =_ "vchan %p: txd %p[%x]: freeing\012"
drivers/dma/virt-dma.c:32 [virt_dma]vchan_tx_submit =_ "vchan %p: txd %p[%x]: submitted\012"
drivers/dma/dmaengine.c:1236 [dmaengine]dma_async_device_register =_ "WARN: Device release is not defined so it is not safe to unbind this driver while in use\012"
drivers/dma/dmaengine.c:953 [dmaengine]dmaengine_get =_ "%s: failed to get %s: (%d)\012"
drivers/dma/dmaengine.c:778 [dmaengine]__dma_request_channel =_ "%s: %s (%s)\012"
drivers/dma/dmaengine.c:711 [dmaengine]dma_get_slave_channel =_ "%s: failed to get %s: (%d)\012"
drivers/dma/dmaengine.c:679 [dmaengine]find_candidate =_ "%s: failed to get %s: (%d)\012"
drivers/dma/dmaengine.c:675 [dmaengine]find_candidate =_ "%s: %s module removed\012"
drivers/dma/dmaengine.c:646 [dmaengine]private_candidate =_ "%s: %s filter said false\012"
drivers/dma/dmaengine.c:641 [dmaengine]private_candidate =_ "%s: %s busy\012"
drivers/dma/dmaengine.c:626 [dmaengine]private_candidate =_ "%s: wrong capabilities\012"
drivers/clk/clk-gpio.c:217 [clk_gpio]gpio_clk_driver_probe =_ "%pOFn: %s: GPIOs not yet available, retry later\012"
drivers/clk/clk.c:3593 [clk]__clk_core_init =_ "%s: clk %s already initialized\012"
drivers/clk/clk.c:2662 [clk]clk_core_set_parent_nolock =_ "%s: clk %s can not be parent of clk %s\012"
drivers/clk/clk.c:2326 [clk]clk_core_set_rate_nolock =_ "%s: failed to set %s rate\012"
drivers/clk/clk.c:2119 [clk]clk_calc_new_rates =_ "%s: clk %s can not be parent of clk %s\012"
drivers/clk/clk.c:2110 [clk]clk_calc_new_rates =_ "%s: %s not gated but wants to reparent\012"
drivers/clk/clk.c:2015 [clk]__clk_speculate_rates =_ "%s: clk notifier callback for clock %s aborted with error %d\012"
drivers/pnp/core.c:218 [pnp]pnp_add_device =_ "%s device, IDs%s (%s)\012"
drivers/pnp/resource.c:543 [pnp]pnp_add_irq_resource =_ "%pR\012"
drivers/pnp/resource.c:522 [pnp]pnp_add_resource =_ "%pR\012"
drivers/pnp/pnpacpi/core.c:170 [pnp]pnpacpi_resume =_ "ACPI device not found in %s!\012"
drivers/pnp/pnpacpi/core.c:134 [pnp]pnpacpi_suspend =_ "ACPI device not found in %s!\012"
drivers/pnp/pnpacpi/core.c:121 [pnp]pnpacpi_can_wakeup =_ "ACPI device not found in %s!\012"
drivers/pnp/pnpacpi/core.c:99 [pnp]pnpacpi_disable_resources =_ "ACPI device not found in %s!\012"
drivers/pnp/pnpacpi/core.c:95 [pnp]pnpacpi_disable_resources =_ "disable resources\012"
drivers/pnp/pnpacpi/core.c:59 [pnp]pnpacpi_set_resources =_ "ACPI device not found in %s!\012"
drivers/acpi/cppc_acpi.c:1368 [cppc_acpi]cppc_set_perf =_ "Invalid pcc_ss_id\012"
drivers/acpi/cppc_acpi.c:1353 [cppc_acpi]cppc_set_perf =_ "No CPC descriptor for CPU:%d\012"
drivers/acpi/cppc_acpi.c:1295 [cppc_acpi]cppc_get_perf_ctrs =_ "Invalid pcc_ss_id\012"
drivers/acpi/cppc_acpi.c:1275 [cppc_acpi]cppc_get_perf_ctrs =_ "No CPC descriptor for CPU:%d\012"
drivers/acpi/cppc_acpi.c:1203 [cppc_acpi]cppc_get_perf_caps =_ "Invalid pcc_ss_id\012"
drivers/acpi/cppc_acpi.c:1186 [cppc_acpi]cppc_get_perf_caps =_ "No CPC descriptor for CPU:%d\012"
drivers/acpi/cppc_acpi.c:1109 [cppc_acpi]cppc_get_perf =_ "No CPC descriptor for CPU:%d\012"
drivers/acpi/cppc_acpi.c:1090 [cppc_acpi]cpc_write =_ "Error: Cannot write %u bit width to PCC for ss: %d\012"
drivers/acpi/cppc_acpi.c:1047 [cppc_acpi]cpc_write =_ "No CPC descriptor for CPU:%d\012"
drivers/acpi/cppc_acpi.c:1002 [cppc_acpi]cpc_read =_ "Error: Cannot read %u bit width from PCC for ss: %d\012"
drivers/acpi/cppc_acpi.c:999 [cppc_acpi]cpc_read =_ "Error: Cannot read %u bit width from system memory: 0x%llx\012"
drivers/acpi/cppc_acpi.c:834 [cppc_acpi]acpi_cppc_processor_probe =_ "Parsed CPC struct for CPU: %d\012"
drivers/acpi/cppc_acpi.c:797 [cppc_acpi]acpi_cppc_processor_probe =_ "Err in entry:%d in CPC table of CPU:%d\012"
drivers/acpi/cppc_acpi.c:789 [cppc_acpi]acpi_cppc_processor_probe =_ "Unsupported register type: %d\012"
drivers/acpi/cppc_acpi.c:772 [cppc_acpi]acpi_cppc_processor_probe =_ "Mismatched PCC ids.\012"
drivers/acpi/cppc_acpi.c:737 [cppc_acpi]acpi_cppc_processor_probe =_ "Unexpected number of _CPC return package entries (%d) for CPU:%d\012"
drivers/acpi/cppc_acpi.c:724 [cppc_acpi]acpi_cppc_processor_probe =_ "Unsupported _CPC Revision (%d) for CPU:%d\012"
drivers/acpi/cppc_acpi.c:718 [cppc_acpi]acpi_cppc_processor_probe =_ "Unexpected entry type(%d) for Revision\012"
drivers/acpi/cppc_acpi.c:708 [cppc_acpi]acpi_cppc_processor_probe =_ "Unexpected entry type(%d) for NumEntries\012"
drivers/acpi/cppc_acpi.c:703 [cppc_acpi]acpi_cppc_processor_probe =_ "Unexpected _CPC NumEntries value (%d) for CPU:%d\012"
drivers/acpi/cppc_acpi.c:419 [cppc_acpi]acpi_get_psd =_ "Invalid _PSD:coord_type for CPU:%d\012"
drivers/acpi/cppc_acpi.c:412 [cppc_acpi]acpi_get_psd =_ "Unknown _PSD:revision for CPU: %d\012"
drivers/acpi/cppc_acpi.c:407 [cppc_acpi]acpi_get_psd =_ "Unknown _PSD:num_entries for CPU:%d\012"
drivers/acpi/cppc_acpi.c:402 [cppc_acpi]acpi_get_psd =_ "Invalid _PSD data for CPU:%d\012"
drivers/acpi/cppc_acpi.c:390 [cppc_acpi]acpi_get_psd =_ "Invalid _PSD data\012"
drivers/acpi/cppc_acpi.c:362 [cppc_acpi]cppc_chan_tx_done =_ "TX completed. CMD sent:%x, ret:%d\012"
drivers/acpi/cppc_acpi.c:359 [cppc_acpi]cppc_chan_tx_done =_ "TX did not complete: CMD sent:%x, ret:%d\012"
drivers/acpi/cppc_acpi.c:298 [cppc_acpi]send_pcc_cmd =_ "PCC cmd for subspace %d not sent due to MPAR limit"
drivers/acpi/battery.c:637 [battery]acpi_battery_set_alarm =_ "Alarm set to %d\012"
drivers/acpi/acpi_memhotplug.c:326 [acpi_memhotplug]acpi_memory_device_add =_ "Memory device configured by ACPI\012"
drivers/acpi/numa/hmat.c:452 [hmat]hmat_parse_proximity_domain =_ "HMAT: Invalid Processor Domain\012"
drivers/acpi/numa/hmat.c:444 [hmat]hmat_parse_proximity_domain =_ "HMAT: Memory Domain missing from SRAT\012"
drivers/acpi/numa/srat.c:159 [srat]acpi_table_print_srat_entry =_ "SRAT Generic Initiator(HID=%.8s UID=%.4s) in proximity domain %d %s\012"
drivers/acpi/numa/srat.c:148 [srat]acpi_table_print_srat_entry =_ "SRAT Generic Initiator(Seg:%u BDF:%u) in proximity domain %d %s\012"
drivers/acpi/numa/srat.c:130 [srat]acpi_table_print_srat_entry =_ "SRAT Processor (acpi id[0x%04x]) in proximity domain %d %s\012"
drivers/acpi/numa/srat.c:118 [srat]acpi_table_print_srat_entry =_ "SRAT Processor (x2apicid[0x%08x]) in proximity domain %d %s\012"
drivers/acpi/numa/srat.c:101 [srat]acpi_table_print_srat_entry =_ "SRAT Memory (0x%llx length 0x%llx) in proximity domain %d %s%s%s\012"
drivers/acpi/numa/srat.c:89 [srat]acpi_table_print_srat_entry =_ "SRAT Processor (id[0x%02x] eid[0x%02x]) in proximity domain %d %s\012"
drivers/acpi/thermal.c:902 [thermal]acpi_thermal_notify =_ "Unsupported event [0x%x]\012"
drivers/acpi/thermal.c:320 [thermal]acpi_thermal_trips_update =_ "Found hot threshold [%lu]\012"
drivers/acpi/thermal.c:315 [thermal]acpi_thermal_trips_update =_ "No hot threshold\012"
drivers/acpi/thermal.c:288 [thermal]acpi_thermal_trips_update =_ "Found critical threshold [%lu]\012"
drivers/acpi/thermal.c:280 [thermal]acpi_thermal_trips_update =_ "No critical threshold\012"
drivers/acpi/thermal.c:213 [thermal]acpi_thermal_get_polling_frequency =_ "Polling frequency is %lu dS\012"
drivers/acpi/thermal.c:194 [thermal]acpi_thermal_get_temperature =_ "Temperature is %lu dK\012"
drivers/acpi/processor_driver.c:157 [processor]acpi_pss_perf_init =_ "registered as cooling_device%d\012"
drivers/acpi/processor_driver.c:87 [processor]acpi_processor_notify =_ "Unsupported event [0x%x]\012"
drivers/acpi/processor_idle.c:1386 [processor]acpi_processor_power_init =_ "%s registered with cpuidle\012"
drivers/acpi/processor_idle.c:995 [processor]acpi_processor_evaluate_lpi =_ "Found %d power states\012"
drivers/acpi/processor_idle.c:978 [processor]acpi_processor_evaluate_lpi =_ "No wakeup residency found, assuming 10 us\012"
drivers/acpi/processor_idle.c:973 [processor]acpi_processor_evaluate_lpi =_ "No min. residency found, assuming 10 us\012"
drivers/acpi/processor_idle.c:920 [processor]acpi_processor_evaluate_lpi =_ "count given by _LPI is not valid\012"
drivers/acpi/processor_idle.c:911 [processor]acpi_processor_evaluate_lpi =_ "not enough elements in _LPI\012"
drivers/acpi/processor_idle.c:902 [processor]acpi_processor_evaluate_lpi =_ "No _LPI, giving up\012"
drivers/acpi/processor_idle.c:363 [processor]acpi_processor_power_verify_c3 =_ "Cache invalidation should work properly for C3 to be enabled on SMP systems\012"
drivers/acpi/processor_idle.c:353 [processor]acpi_processor_power_verify_c3 =_ "C3 support without BM control\012"
drivers/acpi/processor_idle.c:348 [processor]acpi_processor_power_verify_c3 =_ "C3 support requires BM control\012"
drivers/acpi/processor_idle.c:328 [processor]acpi_processor_power_verify_c3 =_ "C3 not supported on PIIX4 with Type-F DMA\012"
drivers/acpi/processor_idle.c:257 [processor]acpi_processor_get_power_info_fadt =_ "lvl2[0x%08x] lvl3[0x%08x]\012"
drivers/acpi/processor_idle.c:251 [processor]acpi_processor_get_power_info_fadt =_ "C3 latency too large [%d]\012"
drivers/acpi/processor_idle.c:240 [processor]acpi_processor_get_power_info_fadt =_ "C2 latency too large [%d]\012"
drivers/acpi/processor_throttling.c:1230 [processor]acpi_processor_get_throttling_info =_ "Disabling throttling (was T%d)\012"
drivers/acpi/processor_throttling.c:1214 [processor]acpi_processor_get_throttling_info =_ "Found %d throttling states\012"
drivers/acpi/processor_throttling.c:1209 [processor]acpi_processor_get_throttling_info =_ "Throttling not supported on PIIX4 A- or B-step\012"
drivers/acpi/processor_throttling.c:1166 [processor]acpi_processor_get_throttling_info =_ "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\012"
drivers/acpi/processor_throttling.c:1128 [processor]__acpi_processor_set_throttling =_ "Throttling Control unsupported on CPU %d\012"
drivers/acpi/processor_throttling.c:1119 [processor]__acpi_processor_set_throttling =_ "Invalid Pointer for CPU %d\012"
drivers/acpi/processor_throttling.c:1005 [processor]acpi_processor_set_throttling_fadt =_ "Throttling state set to T%d (%d%%)\012"
drivers/acpi/processor_throttling.c:914 [processor]acpi_processor_get_fadt_info =_ "No throttling states\012"
drivers/acpi/processor_throttling.c:911 [processor]acpi_processor_get_fadt_info =_ "No throttling register\012"
drivers/acpi/processor_throttling.c:865 [processor]acpi_processor_get_throttling_ptc =_ "Invalid throttling state, reset\012"
drivers/acpi/processor_throttling.c:692 [processor]acpi_processor_get_throttling_fadt =_ "Throttling state is T%d (%d%% throttling applied)\012"
drivers/acpi/processor_throttling.c:531 [processor]acpi_processor_get_throttling_states =_ "Extracting state %d\012"
drivers/acpi/processor_throttling.c:509 [processor]acpi_processor_get_throttling_states =_ "Found %d throttling states\012"
drivers/acpi/processor_throttling.c:251 [processor]acpi_processor_throttling_notifier =_ "PostChange Event: CPU %d is switched to T%d\012"
drivers/acpi/processor_throttling.c:241 [processor]acpi_processor_throttling_notifier =_ "PreChange Event: target T-state of CPU %d is T%d\012"
drivers/acpi/processor_throttling.c:216 [processor]acpi_processor_throttling_notifier =_ "Throttling control unsupported on CPU %d\012"
drivers/acpi/processor_throttling.c:212 [processor]acpi_processor_throttling_notifier =_ "Invalid pr pointer\012"
drivers/acpi/processor_throttling.c:197 [processor]acpi_processor_throttling_init =_ "Assume no T-state coordination\012"
drivers/acpi/processor_perflib.c:506 [processor]acpi_processor_notify_smm =_ "No SMI port or pstate_control\012"
drivers/acpi/processor_perflib.c:464 [processor]acpi_processor_pstate_control =_ "Writing pstate_control [0x%x] to smi_command [0x%x]\012"
drivers/acpi/processor_perflib.c:422 [processor]acpi_processor_get_performance_info =_ "ACPI-based processor performance control unavailable\012"
drivers/acpi/processor_perflib.c:365 [processor]acpi_processor_get_performance_states =_ "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\012"
drivers/acpi/processor_perflib.c:351 [processor]acpi_processor_get_performance_states =_ "Extracting state %d\012"
drivers/acpi/processor_perflib.c:331 [processor]acpi_processor_get_performance_states =_ "Found %d performance states\012"
drivers/acpi/processor_perflib.c:83 [processor]acpi_processor_get_platform_limit =_ "CPU %d: _PPC is %d - frequency %s limited\012"
drivers/acpi/pci_slot.c:124 [pci_slot]register_slot =_ "%p, pci_bus: %x, device: %d, name: %s\012"
drivers/acpi/pci_slot.c:69 [pci_slot]check_slot =_ "_SUN returned %d on %s\012"
drivers/acpi/pci_slot.c:61 [pci_slot]check_slot =_ "_ADR returned %d on %s\012"
drivers/acpi/pci_slot.c:50 [pci_slot]check_slot =_ "Checking slot on path: %s\012"
drivers/acpi/fan.c:420 [fan]acpi_fan_probe =_ "registered as cooling_device%d\012"
drivers/acpi/fan.c:197 [fan]fan_set_state_acpi4 =_ "Failed to set state by _FSL\012"
drivers/acpi/fan.c:138 [fan]fan_get_state_acpi4 =_ "Invalid control value returned\012"
drivers/acpi/button.c:458 [button]acpi_button_notify =_ "Unsupported event [0x%x]\012"
drivers/acpi/button.c:277 [button]acpi_lid_notify_state =_ "ACPI LID %s\012"
drivers/acpi/ac.c:152 [ac]acpi_ac_notify =_ "Unsupported event [0x%x]\012"
drivers/acpi/osl.c:1745 [acpi]acpi_os_initialize =_ "%s: Reset register mapping %s\012"
drivers/acpi/osl.c:1168 [acpi]acpi_hotplug_schedule =_ "Scheduling hotplug event %u for deferred handling\012"
drivers/acpi/utils.c:361 [acpi]acpi_evaluate_reference =_ "Found in reference list\012"
drivers/acpi/utils.c:273 [acpi]acpi_evaluate_integer =_ "Return value [%llu]\012"
drivers/acpi/utils.c:133 [acpi]acpi_extract_package =_ "Unsupported element at index=%d\012"
drivers/acpi/utils.c:125 [acpi]acpi_extract_package =_ "Invalid package element [%d] got reference, expected [%c]\012"
drivers/acpi/utils.c:113 [acpi]acpi_extract_package =_ "Invalid package element [%d] got string/buffer, expected [%c]\012"
drivers/acpi/utils.c:91 [acpi]acpi_extract_package =_ "Invalid package element [%d]: got number, expected [%c]\012"
drivers/acpi/utils.c:62 [acpi]acpi_extract_package =_ "Format specifies more objects [%d] than present [%d]\012"
drivers/acpi/utils.c:56 [acpi]acpi_extract_package =_ "Invalid buffer argument\012"
drivers/acpi/utils.c:51 [acpi]acpi_extract_package =_ "Invalid format argument\012"
drivers/acpi/utils.c:46 [acpi]acpi_extract_package =_ "Invalid package argument\012"
drivers/acpi/utils.c:28 [acpi]acpi_util_eval_error =_ "Evaluate [%s]: %s\012"
drivers/acpi/reboot.c:68 [acpi]acpi_reboot =_ "ACPI MEMORY or I/O RESET_REG.\012"
drivers/acpi/reboot.c:23 [acpi]acpi_pci_reboot =_ "Resetting with ACPI PCI RESET_REG.\012"
drivers/acpi/sleep.c:1047 [acpi]acpi_power_off =_ "%s called\012"
drivers/acpi/device_pm.c:1172 [acpi]acpi_subsys_resume =_ "executing postponed D0 transition\012"
drivers/acpi/device_pm.c:1150 [acpi]acpi_subsys_resume_early =_ "postponing D0 transition to normal resume stage\012"
drivers/acpi/device_pm.c:870 [acpi]acpi_pm_set_device_wakeup =_ "Wakeup enabled by ACPI\012"
drivers/acpi/device_pm.c:864 [acpi]acpi_pm_set_device_wakeup =_ "Wakeup disabled by ACPI\012"
drivers/acpi/device_pm.c:855 [acpi]acpi_pm_set_device_wakeup =_ "ACPI companion missing in %s!\012"
drivers/acpi/device_pm.c:785 [acpi]__acpi_device_wakeup_enable =_ "GPE%2X enabled for wakeup\012"
drivers/acpi/device_pm.c:706 [acpi]acpi_pm_device_sleep_state =_ "ACPI companion missing in %s!\012"
drivers/acpi/device_pm.c:459 [acpi]acpi_pm_notify_handler =_ "Running %pS for %s\012"
drivers/acpi/device_pm.c:448 [acpi]acpi_pm_notify_handler =_ "Wake notify\012"
drivers/acpi/device_pm.c:278 [acpi]acpi_device_set_power =_ "Power state changed to %s\012"
drivers/acpi/device_pm.c:177 [acpi]acpi_device_set_power =_ "Device already in %s\012"
drivers/acpi/device_pm.c:169 [acpi]acpi_device_set_power =_ "Power state change: %s -> %s\012"
drivers/acpi/device_pm.c:133 [acpi]acpi_device_get_power =_ "Device power state is %s\012"
drivers/acpi/bus.c:1339 [acpi]acpi_init =_ "%s: kset create error\012"
drivers/acpi/bus.c:1034 [acpi]acpi_device_probe =_ "Found driver [%s] for device [%s]\012"
drivers/acpi/bus.c:1019 [acpi]acpi_device_probe =_ "Driver [%s] successfully bound to device [%s]\012"
drivers/acpi/bus.c:493 [acpi]acpi_bus_notify =_ "Unknown event type 0x%x\012"
drivers/acpi/bus.c:474 [acpi]acpi_bus_notify =_ "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\012"
drivers/acpi/bus.c:469 [acpi]acpi_bus_notify =_ "ACPI_NOTIFY_EJECT_REQUEST event\012"
drivers/acpi/bus.c:465 [acpi]acpi_bus_notify =_ "ACPI_NOTIFY_DEVICE_WAKE event\012"
drivers/acpi/bus.c:460 [acpi]acpi_bus_notify =_ "ACPI_NOTIFY_DEVICE_CHECK event\012"
drivers/acpi/bus.c:455 [acpi]acpi_bus_notify =_ "ACPI_NOTIFY_BUS_CHECK event\012"
drivers/acpi/bus.c:184 [acpi]acpi_print_osc_error =_ "\012"
drivers/acpi/bus.c:182 [acpi]acpi_print_osc_error =_ " %x"
drivers/acpi/bus.c:180 [acpi]acpi_print_osc_error =_ "_OSC request data:"
drivers/acpi/bus.c:178 [acpi]acpi_print_osc_error =_ "(%s): %s\012"
drivers/acpi/bus.c:159 [acpi]acpi_bus_get_private_data =_ "No context for object\012"
drivers/acpi/bus.c:142 [acpi]acpi_bus_attach_private_data =_ "Error attaching device data\012"
drivers/acpi/bus.c:123 [acpi]acpi_bus_get_status =_ "Device [%s] status [%08x]\012"
drivers/acpi/bus.c:119 [acpi]acpi_bus_get_status =_ "Device [%s] status [%08x]: functional but not present\012"
drivers/acpi/glue.c:324 [acpi]acpi_device_notify =_ "No ACPI support\012"
drivers/acpi/glue.c:318 [acpi]acpi_device_notify =_ "Bound to device %s\012"
drivers/acpi/glue.c:301 [acpi]acpi_device_notify =_ "ACPI companion not found\012"
drivers/acpi/scan.c:1973 [acpi]acpi_scan_check_dep =_ "Error reading _DEP device info\012"
drivers/acpi/scan.c:1962 [acpi]acpi_scan_check_dep =_ "Failed to evaluate _DEP.\012"
drivers/acpi/scan.c:1832 [acpi]acpi_add_single_object =_ "Added as %s, parent %s\012"
drivers/acpi/scan.c:1576 [acpi]acpi_iommu_configure_id =_ "Adding to IOMMU failed: %d\012"
drivers/acpi/scan.c:1512 [acpi]acpi_dma_get_range =_ "Invalid DMA regions configuration\012"
drivers/acpi/scan.c:1197 [acpi]acpi_backlight_cap_match =_ "Found generic backlight support\012"
drivers/acpi/scan.c:976 [acpi]acpi_bus_get_wakeup_device_flags =_ "error in _DSW or _PSW evaluation\012"
drivers/acpi/scan.c:579 [acpi]handle_to_device =_ "No context!\012"
drivers/acpi/scan.c:318 [acpi]acpi_scan_device_check =_ "Already enumerated\012"
drivers/acpi/scan.c:263 [acpi]acpi_scan_hot_remove =_ "Ejecting\012"
drivers/acpi/resource.c:235 [acpi]acpi_decode_space =_ "ACPI: translation_offset(%lld) is invalid for non-bridge device.\012"
drivers/acpi/resource.c:222 [acpi]acpi_decode_space =_ "ACPI: Invalid address space min_addr_fix %d, max_addr_fix %d, len %llx\012"
drivers/acpi/resource.c:66 [acpi]acpi_dev_resource_len_valid =_ "ACPI: invalid or unassigned resource %s [%016llx - %016llx] length [%016llx]\012"
drivers/acpi/acpi_processor.c:742 [acpi]acpi_processor_evaluate_cst =_ "No _CST\012"
drivers/acpi/acpi_processor.c:321 [acpi]acpi_processor_get_info =_ "No PBLK (NULL address)\012"
drivers/acpi/acpi_processor.c:318 [acpi]acpi_processor_get_info =_ "Processor [%d:%d]\012"
drivers/acpi/acpi_processor.c:280 [acpi]acpi_processor_get_info =_ "Failed to get CPU physical ID.\012"
drivers/acpi/acpi_processor.c:237 [acpi]acpi_processor_get_info =_ "No bus mastering arbitration control\012"
drivers/acpi/acpi_processor.c:235 [acpi]acpi_processor_get_info =_ "Bus mastering arbitration control present\012"
drivers/acpi/acpi_processor.c:127 [acpi]acpi_processor_errata_piix4 =_ "Type-F DMA livelock erratum (C3 disabled)\012"
drivers/acpi/acpi_processor.c:125 [acpi]acpi_processor_errata_piix4 =_ "Bus master activity detection (BM-IDE) erratum enabled\012"
drivers/acpi/acpi_processor.c:59 [acpi]acpi_processor_errata_piix4 =_ "Found unknown PIIX4\012"
drivers/acpi/acpi_processor.c:56 [acpi]acpi_processor_errata_piix4 =_ "Found PIIX4M\012"
drivers/acpi/acpi_processor.c:53 [acpi]acpi_processor_errata_piix4 =_ "Found PIIX4E\012"
drivers/acpi/acpi_processor.c:50 [acpi]acpi_processor_errata_piix4 =_ "Found PIIX4 B-step\012"
drivers/acpi/acpi_processor.c:47 [acpi]acpi_processor_errata_piix4 =_ "Found PIIX4 A-step\012"
drivers/acpi/processor_pdc.c:143 [acpi]acpi_processor_eval_pdc =_ "Could not evaluate _PDC, using legacy perf control\012"
drivers/acpi/ec.c:2186 [acpi]acpi_ec_init =_ "Disabling EC wakeup on suspend-to-idle\012"
drivers/acpi/ec.c:1885 [acpi]ec_honor_dsdt_gpe =_ "Detected system needing DSDT GPE setting.\012"
drivers/acpi/ec.c:1873 [acpi]ec_correct_ecdt =_ "Detected system needing ECDT address correction.\012"
drivers/acpi/ec.c:1860 [acpi]ec_clear_on_resume =_ "Detected system needing EC poll on resume.\012"
drivers/acpi/ec.c:1691 [acpi]acpi_ec_add =_ "enumerated.\012"
drivers/acpi/ec.c:1663 [acpi]acpi_ec_add =_ "duplicated.\012"
drivers/acpi/ec.c:1277 [acpi]acpi_ec_event_handler =_ "Event stopped\012"
drivers/acpi/ec.c:1255 [acpi]acpi_ec_event_handler =_ "Event started\012"
drivers/acpi/ec.c:1215 [acpi]acpi_ec_query =_ "Query(0x%02x) scheduled\012"
drivers/acpi/ec.c:1172 [acpi]acpi_ec_event_processor =_ "Query(0x%02x) stopped\012"
drivers/acpi/ec.c:1165 [acpi]acpi_ec_event_processor =_ "Query(0x%02x) started\012"
drivers/acpi/ec.c:997 [acpi]acpi_ec_stop =_ "%lu: Decrease driver\012"
drivers/acpi/ec.c:989 [acpi]acpi_ec_stop =_ "Stopping EC\012"
drivers/acpi/ec.c:965 [acpi]acpi_ec_start =_ "%lu: Increase driver\012"
drivers/acpi/ec.c:961 [acpi]acpi_ec_start =_ "Starting EC\012"
drivers/acpi/ec.c:802 [acpi]acpi_ec_transaction_unlocked =_ "%lu: Decrease command\012"
drivers/acpi/ec.c:798 [acpi]acpi_ec_transaction_unlocked =_ "Command(%s) stopped\012"
drivers/acpi/ec.c:789 [acpi]acpi_ec_transaction_unlocked =_ "Command(%s) started\012"
drivers/acpi/ec.c:786 [acpi]acpi_ec_transaction_unlocked =_ "%lu: Increase command\012"
drivers/acpi/ec.c:762 [acpi]ec_poll =_ "controller reset, restart transaction\012"
drivers/acpi/ec.c:683 [acpi]advance_transaction =_ "Command(%s) completed by hardware\012"
drivers/acpi/ec.c:636 [acpi]advance_transaction =_ "%s (%d)\012"
drivers/acpi/ec.c:463 [acpi]acpi_ec_complete_query =_ "Command(%s) unblocked\012"
drivers/acpi/ec.c:452 [acpi]acpi_ec_submit_query =_ "Command(%s) submitted/blocked\012"
drivers/acpi/ec.c:423 [acpi]acpi_ec_unmask_events =_ "Polling disabled\012"
drivers/acpi/ec.c:409 [acpi]acpi_ec_mask_events =_ "Polling enabled\012"
drivers/acpi/ec.c:361 [acpi]acpi_ec_enable_gpe =_ "Polling quirk\012"
drivers/acpi/ec.c:309 [acpi]acpi_ec_write_data =_ "EC_DATA(W) = 0x%2.2x\012"
drivers/acpi/ec.c:302 [acpi]acpi_ec_write_cmd =_ "EC_SC(W) = 0x%2.2x\012"
drivers/acpi/ec.c:296 [acpi]acpi_ec_read_data =_ "EC_DATA(R) = 0x%2.2x\012"
drivers/acpi/ec.c:280 [acpi]acpi_ec_read_status =_ "EC_SC(R) = 0x%2.2x SCI_EVT=%d BURST=%d CMD=%d IBF=%d OBF=%d\012"
drivers/acpi/dock.c:276 [acpi]hotplug_dock_devices =_ "scan error %d\012"
drivers/acpi/pci_root.c:777 [acpi]acpi_pci_probe_root_resources =_ "no IO and memory resources present in _CRS\012"
drivers/acpi/pci_root.c:321 [acpi]acpi_get_pci_dev =_ "Not a PCI-to-PCI bridge\012"
drivers/acpi/pci_link.c:738 [acpi]acpi_pci_link_add =_ "Possible IRQ %d\012"
drivers/acpi/pci_link.c:695 [acpi]acpi_pci_link_free_irq =_ "Link is dereferenced\012"
drivers/acpi/pci_link.c:651 [acpi]acpi_pci_link_allocate_irq =_ "Link is referenced\012"
drivers/acpi/pci_link.c:381 [acpi]acpi_pci_link_set =_ "Set IRQ %d\012"
drivers/acpi/pci_link.c:271 [acpi]acpi_pci_link_get_current =_ "Link at IRQ %d \012"
drivers/acpi/pci_link.c:247 [acpi]acpi_pci_link_get_current =_ "Link disabled\012"
drivers/acpi/pci_link.c:213 [acpi]acpi_pci_link_check_current =_ "_CRS resource type 0x%x is not IRQ\012"
drivers/acpi/pci_link.c:205 [acpi]acpi_pci_link_check_current =_ "Blank _CRS EXT IRQ resource\012"
drivers/acpi/pci_link.c:190 [acpi]acpi_pci_link_check_current =_ "Blank _CRS IRQ resource\012"
drivers/acpi/pci_link.c:167 [acpi]acpi_pci_link_get_possible =_ "Found %d possible IRQs\012"
drivers/acpi/pci_link.c:163 [acpi]acpi_pci_link_get_possible =_ "_PRS not present or invalid"
drivers/acpi/pci_link.c:147 [acpi]acpi_pci_link_check_possible =_ "_PRS resource type 0x%x is not IRQ\012"
drivers/acpi/pci_link.c:133 [acpi]acpi_pci_link_check_possible =_ "Invalid _PRS IRQ %d\012"
drivers/acpi/pci_link.c:125 [acpi]acpi_pci_link_check_possible =_ "Blank _PRS EXT IRQ resource\012"
drivers/acpi/pci_link.c:107 [acpi]acpi_pci_link_check_possible =_ "Invalid _PRS IRQ %d\012"
drivers/acpi/pci_link.c:99 [acpi]acpi_pci_link_check_possible =_ "Blank _PRS IRQ resource\012"
drivers/acpi/pci_irq.c:509 [acpi]acpi_pci_irq_disable =_ "PCI INT %c disabled\012"
drivers/acpi/pci_irq.c:466 [acpi]acpi_pci_irq_enable =_ "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\012"
drivers/acpi/pci_irq.c:404 [acpi]acpi_pci_irq_enable =_ "No interrupt pin configured\012"
drivers/acpi/pci_irq.c:327 [acpi]acpi_pci_irq_lookup =_ "Derived GSI INT %c from %s\012"
drivers/acpi/pci_irq.c:319 [acpi]acpi_pci_irq_lookup =_ "No interrupt pin configured\012"
drivers/acpi/pci_irq.c:303 [acpi]acpi_pci_irq_lookup =_ "Found [%c] _PRT entry\012"
drivers/acpi/pci_irq.c:190 [acpi]acpi_pci_irq_check_entry =_ "%04x:%02x:%02x[%c] -> %s[%d]\012"
drivers/acpi/acpi_lpss.c:862 [acpi]acpi_lpss_restore_ctx =_ "restoring 0x%08x to LPSS reg at offset 0x%02lx\012"
drivers/acpi/acpi_lpss.c:841 [acpi]acpi_lpss_save_ctx =_ "saving 0x%08x from LPSS reg at offset 0x%02lx\012"
drivers/acpi/acpi_lpss.c:564 [acpi]acpi_lpss_dep =_ "Failed to evaluate _DEP.\012"
drivers/acpi/acpi_platform.c:160 [acpi]acpi_create_platform_device =_ "created platform device %s\012"
drivers/acpi/power.c:1016 [acpi]acpi_turn_off_unused_power_resources =_ "Turning OFF\012"
drivers/acpi/power.c:991 [acpi]acpi_resume_power_resources =_ "Turning ON\012"
drivers/acpi/power.c:449 [acpi]acpi_power_off_unlocked =_ "Power resource still in use\012"
drivers/acpi/power.c:443 [acpi]acpi_power_off_unlocked =_ "Power resource already off\012"
drivers/acpi/power.c:433 [acpi]__acpi_power_off =_ "Power resource turned off\012"
drivers/acpi/power.c:400 [acpi]acpi_power_on_unlocked =_ "Power resource already on\012"
drivers/acpi/power.c:387 [acpi]__acpi_power_on =_ "runtime resuming because [%s] turned on\012"
drivers/acpi/power.c:375 [acpi]__acpi_power_on =_ "Power resource turned on\012"
drivers/acpi/power.c:289 [acpi]acpi_power_resource_remove_dependent =_ "removed power dependency to [%s]\012"
drivers/acpi/power.c:270 [acpi]acpi_power_resource_add_dependent =_ "added power dependency to [%s]\012"
drivers/acpi/power.c:242 [acpi]acpi_power_get_list_state =_ "Power resource list is %s\012"
drivers/acpi/power.c:198 [acpi]__get_state =_ "Power resource is %s\012"
drivers/acpi/evged.c:171 [acpi]ged_shutdown =_ "GED releasing GSI %u @ IRQ %u\012"
drivers/acpi/evged.c:136 [acpi]acpi_ged_request_interrupt =_ "GED listening GSI %u @ IRQ %u\012"
drivers/acpi/sysfs.c:629 [acpi]acpi_global_event_handler =_ "Other event 0x%02x\012"
drivers/acpi/sysfs.c:627 [acpi]acpi_global_event_handler =_ "Fixed event 0x%02x\012"
drivers/acpi/sysfs.c:624 [acpi]acpi_global_event_handler =_ "GPE event 0x%02x\012"
drivers/acpi/property.c:423 [acpi]acpi_init_properties =_ "Invalid _DSD data, skipping\012"
drivers/acpi/property.c:114 [acpi]acpi_nondev_subnode_extract =_ "Invalid properties/subnodes data, skipping\012"
drivers/acpi/x86/s2idle.c:394 [acpi]lps0_device_attach =_ "_DSM UUID %s: Adjusted function mask: 0x%x\012"
drivers/acpi/x86/s2idle.c:358 [acpi]validate_dsm =_ "_DSM UUID %s rev %d function mask: 0x%x\012"
drivers/acpi/x86/s2idle.c:352 [acpi]validate_dsm =_ "_DSM UUID %s rev %d function 0 evaluation failed\012"
drivers/acpi/x86/s2idle.c:332 [acpi]acpi_sleep_run_lps0_dsm =_ "_DSM function %u evaluation %s\012"
drivers/acpi/x86/s2idle.c:302 [acpi]lpi_check_constraints =_ "LPI: required min power state:%s current power state:%s\012"
drivers/acpi/x86/s2idle.c:285 [acpi]lpi_device_get_constraints =_ "LPI: constraints list end\012"
drivers/acpi/x86/s2idle.c:277 [acpi]lpi_device_get_constraints =_ "Incomplete constraint defined\012"
drivers/acpi/x86/s2idle.c:266 [acpi]lpi_device_get_constraints =_ "uid:%d min_dstate:%s\012"
drivers/acpi/x86/s2idle.c:241 [acpi]lpi_device_get_constraints =_ "index:%d Name:%s\012"
drivers/acpi/x86/s2idle.c:202 [acpi]lpi_device_get_constraints =_ "LPI: constraints list begin:\012"
drivers/acpi/x86/s2idle.c:190 [acpi]lpi_device_get_constraints =_ "_DSM function 1 eval %s\012"
drivers/acpi/x86/s2idle.c:175 [acpi]lpi_device_get_constraints_amd =_ "LPI: constraints list end\012"
drivers/acpi/x86/s2idle.c:165 [acpi]lpi_device_get_constraints_amd =_ "Name:%s\012"
drivers/acpi/x86/s2idle.c:127 [acpi]lpi_device_get_constraints_amd =_ "LPI: constraints list begin:\012"
drivers/acpi/x86/s2idle.c:104 [acpi]lpi_device_get_constraints_amd =_ "_DSM function 1 eval %s\012"
drivers/acpi/acpi_adxl.c:147 [acpi]adxl_init =_ "No ACPI handle for path %s\012"
drivers/acpi/tables.c:206 [tables]acpi_table_print_madt_entry =_ "GIC Distributor (gic_id[0x%04x] address[%llx] gsi_base[%d])\012"
drivers/acpi/tables.c:194 [tables]acpi_table_print_madt_entry =_ "GICC (acpi_id[0x%04x] address[%llx] MPIDR[0x%llx] %s)\012"
drivers/acpi/tables.c:172 [tables]acpi_table_print_madt_entry =_ "LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\012"
drivers/acpi/tables.c:162 [tables]acpi_table_print_madt_entry =_ "IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\012"
drivers/acpi/tables.c:88 [tables]acpi_table_print_madt_entry =_ "IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\012"
drivers/acpi/tables.c:78 [tables]acpi_table_print_madt_entry =_ "X2APIC (apic_id[0x%02x] uid[0x%02x] %s)\012"
drivers/acpi/tables.c:68 [tables]acpi_table_print_madt_entry =_ "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\012"
drivers/idle/intel_idle.c:1797 [intel_idle]intel_idle_init =_ "Local APIC timer is reliable in %s\012"
drivers/idle/intel_idle.c:1775 [intel_idle]intel_idle_init =_ "v0.5.1 model 0x%X\012"
drivers/idle/intel_idle.c:1762 [intel_idle]intel_idle_init =_ "MWAIT substates: 0x%x\012"
drivers/idle/intel_idle.c:1743 [intel_idle]intel_idle_init =_ "Please enable MWAIT in BIOS SETUP\012"
drivers/idle/intel_idle.c:1736 [intel_idle]intel_idle_init =_ "disabled\012"
drivers/idle/intel_idle.c:1682 [intel_idle]intel_idle_cpu_init =_ "cpuidle_register_device %d failed!\012"
drivers/idle/intel_idle.c:1595 [intel_idle]intel_idle_init_cstates_icpu =_ "state %s is disabled\012"
drivers/idle/intel_idle.c:1290 [intel_idle]intel_idle_acpi_cst_extract =_ "ACPI _CST not found or not usable\012"
drivers/idle/intel_idle.c:1265 [intel_idle]intel_idle_acpi_cst_extract =_ "Not allowed to use ACPI _CST\012"
drivers/video/backlight/backlight.c:400 [backlight]backlight_device_register =_ "backlight_device_register: name=%s\012"
drivers/video/backlight/backlight.c:240 [backlight]backlight_device_set_brightness =_ "set brightness to %lu\012"
drivers/video/backlight/backlight.c:203 [backlight]bl_power_store =_ "set power to %lu\012"
drivers/pci/controller/vmd.c:473 [vmd]vmd_acpi_find_companion =_ "Looking for ACPI companion (address 0x%x)\012"
drivers/pci/hotplug/acpiphp_core.c:250 [acpiphp]get_adapter_status =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_core.c:230 [acpiphp]get_latch_status =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_core.c:206 [acpiphp]get_attention_status =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_core.c:184 [acpiphp]get_power_status =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_core.c:160 [acpiphp]set_attention_status =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_core.c:140 [acpiphp]disable_slot =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_core.c:123 [acpiphp]enable_slot =_ "%s - physical_slot = %s\012"
drivers/pci/hotplug/acpiphp_glue.c:818 [acpiphp]hotplug_event =_ "Eject request in %s()\012"
drivers/pci/hotplug/acpiphp_glue.c:803 [acpiphp]hotplug_event =_ "Device check in %s()\012"
drivers/pci/hotplug/acpiphp_glue.c:793 [acpiphp]hotplug_event =_ "Bus check in %s()\012"
drivers/pci/hotplug/acpiphp_glue.c:312 [acpiphp]acpiphp_add_context =_ "found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\012"
drivers/pci/hotplug/pciehp_core.c:365 [pciehp]pcie_hp_init =_ "Failure to register service\012"
drivers/pci/hotplug/pciehp_core.c:363 [pciehp]pcie_hp_init =_ "pcie_port_service_register = %d\012"
drivers/pci/hotplug/pciehp_pci.c:97 [pciehp]pciehp_unconfigure_device =_ "pciehp: %s: domain:bus:dev = %04x:%02x:00\012"
drivers/pci/hotplug/pciehp_pci.c:47 [pciehp]pciehp_configure_device =_ "pciehp: Device %s already exists at %04x:%02x:00, skipping hot-add\012"
drivers/pci/hotplug/pciehp_hpc.c:959 [pciehp]dbg_ctrl =_ "pciehp: Slot Control           : 0x%04x\012"
drivers/pci/hotplug/pciehp_hpc.c:957 [pciehp]dbg_ctrl =_ "pciehp: Slot Status            : 0x%04x\012"
drivers/pci/hotplug/pciehp_hpc.c:955 [pciehp]dbg_ctrl =_ "pciehp: Slot Capabilities      : 0x%08x\012"
drivers/pci/hotplug/pciehp_hpc.c:925 [pciehp]pciehp_reset_slot =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:918 [pciehp]pciehp_reset_slot =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:829 [pciehp]pcie_disable_notification =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:816 [pciehp]pcie_enable_notification =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:684 [pciehp]pciehp_isr =_ "pciehp: ignoring hotplug event %#06x\012"
drivers/pci/hotplug/pciehp_hpc.c:664 [pciehp]pciehp_isr =_ "pciehp: pending interrupts %#06x from Slot Status\012"
drivers/pci/hotplug/pciehp_hpc.c:557 [pciehp]pciehp_power_off_slot =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:543 [pciehp]pciehp_power_on_slot =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:524 [pciehp]pciehp_set_indicators =_ "pciehp: %s: SLOTCTRL %x write cmd %x\012"
drivers/pci/hotplug/pciehp_hpc.c:398 [pciehp]pciehp_get_power_status =_ "pciehp: %s: SLOTCTRL %x value read %x\012"
drivers/pci/hotplug/pciehp_hpc.c:371 [pciehp]pciehp_get_attention_status =_ "pciehp: %s: SLOTCTRL %x, value read %x\012"
drivers/pci/hotplug/pciehp_hpc.c:313 [pciehp]pciehp_check_link_status =_ "pciehp: %s: lnk_status = %x\012"
drivers/pci/hotplug/pciehp_hpc.c:269 [pciehp]pci_bus_check_dev =_ "pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\012"
drivers/pci/hotplug/pciehp_hpc.c:245 [pciehp]pciehp_check_link_active =_ "pciehp: %s: lnk_status = %x\012"
drivers/pci/hotplug/acpi_pcihp.c:55 [pci_hotplug]acpi_run_oshp =_ "%s:%s OSHP passes\012"
drivers/pci/quirks.c:5731 [quirks]quirk_switchtec_ntb_dma_alias =_ "Aliasing Partition %d Proxy ID %02x.%d\012"
drivers/pci/quirks.c:5708 [quirks]quirk_switchtec_ntb_dma_alias =_ "Processing partition %d\012"
drivers/pci/pci-acpi.c:1062 [pci_acpi]acpi_pci_set_power_state =_ "power state changed by ACPI to %s\012"
drivers/pci/pci-acpi.c:553 [pci_acpi]program_hpx_type3_register =_ "Applied _HPX3 at [0x%x]: 0x%08x -> 0x%08x"
drivers/pci/slot.c:316 [slot]pci_destroy_slot =_ "dev %02x, dec refcount to %d\012"
drivers/pci/slot.c:293 [slot]pci_create_slot =_ "dev %02x, created physical slot %s\012"
drivers/pci/slot.c:72 [slot]pci_slot_release =_ "dev %02x, released physical slot %s\012"
drivers/pci/pcie/edr.c:245 [edr]pci_acpi_remove_edr_notifier =_ "EDR: Notify handler removed\012"
drivers/pci/pcie/edr.c:233 [edr]pci_acpi_add_edr_notifier =_ "EDR: Notify handler installed\012"
drivers/pci/pcie/edr.c:218 [edr]pci_acpi_add_edr_notifier =_ "EDR: No valid ACPI node, skipping EDR init\012"
drivers/pci/pcie/edr.c:205 [edr]edr_handle_event =_ "EDR: DPC port recovery failed\012"
drivers/pci/pcie/edr.c:201 [edr]edr_handle_event =_ "EDR: DPC port successfully recovered\012"
drivers/pci/pcie/edr.c:169 [edr]edr_handle_event =_ "EDR: Reported EDR dev: %s\012"
drivers/pci/pcie/edr.c:138 [edr]acpi_send_edr_status =_ "EDR: Status for %s: %#x\012"
drivers/pci/pcie/err.c:244 [pcieportdrv]pcie_do_recovery =_ "AER: broadcast resume message\012"
drivers/pci/pcie/err.c:237 [pcieportdrv]pcie_do_recovery =_ "AER: broadcast slot_reset message\012"
drivers/pci/pcie/err.c:226 [pcieportdrv]pcie_do_recovery =_ "AER: broadcast mmio_enabled message\012"
drivers/pci/pcie/err.c:213 [pcieportdrv]pcie_do_recovery =_ "AER: broadcast error_detected message\012"
drivers/pci/pcie/rcec.c:49 [pcieportdrv]link_rcec_helper =_ "PME & error events signaled via %s\012"
drivers/pci/setup-irq.c:57 [setup_irq]pci_assign_irq =_ "assign IRQ: got %d\012"
drivers/pci/setup-irq.c:27 [setup_irq]pci_assign_irq =_ "runtime IRQ mapping not provided by arch\012"
drivers/pci/setup-bus.c:1875 [setup_bus]adjust_bridge_window =_ "bridge window %pR shrunken by %pa\012"
drivers/pci/setup-bus.c:1871 [setup_bus]adjust_bridge_window =_ "bridge window %pR extended by %pa\012"
drivers/pci/pci-driver.c:1270 [pci_driver]pci_pm_runtime_suspend =_ "can't suspend now (%ps returned %d)\012"
drivers/pci/pci-driver.c:876 [pci_driver]pci_pm_suspend_noirq =_ "PCI PM: Skipped\012"
drivers/pci/pci-driver.c:861 [pci_driver]pci_pm_suspend_noirq =_ "PCI PM: Suspend power state: %s\012"
drivers/pci/pci.c:4985 [pci]pci_bridge_wait_for_secondary_bus =_ "waiting %d ms for downstream link, after activation\012"
drivers/pci/pci.c:4982 [pci]pci_bridge_wait_for_secondary_bus =_ "waiting %d ms for downstream link\012"
drivers/pci/pci.c:4956 [pci]pci_bridge_wait_for_secondary_bus =_ "waiting %d ms for secondary bus\012"
drivers/pci/pci.c:4467 [pci]pci_set_mwi =_ "enabling Mem-Wr-Inval\012"
drivers/pci/pci.c:4438 [pci]pci_set_cacheline_size =_ "cache line size of %d is not supported\012"
drivers/pci/pci.c:4337 [pci]__pci_set_master =_ "%s bus mastering\012"
drivers/pci/pci.c:2454 [pci]pci_pme_active =_ "PME# %s\012"
drivers/pci/pci.c:1618 [pci]pci_restore_config_dword =_ "restoring config space at offset %#x (was %#x, writing %#x)\012"
drivers/pci/pci.c:1587 [pci]pci_save_state =_ "saving config space at offset %#x (reading %#x)\012"
drivers/pci/probe.c:3011 [probe]pci_scan_child_bus_extend =_ "bus scan returning with max=%02x\012"
drivers/pci/probe.c:2999 [probe]pci_scan_child_bus_extend =_ "%pR extended by %#02x\012"
drivers/pci/probe.c:2919 [probe]pci_scan_child_bus_extend =_ "fixups for bus\012"
drivers/pci/probe.c:2890 [probe]pci_scan_child_bus_extend =_ "scanning bus\012"
drivers/pci/probe.c:2319 [probe]pci_release_dev =_ "device released\012"
drivers/pci/probe.c:1658 [probe]pci_set_removable =_ "marking as removable\012"
drivers/pci/probe.c:1630 [probe]set_pcie_untrusted =_ "marking as untrusted\012"
drivers/pci/probe.c:1287 [probe]pci_scan_bridge_extend =_ "scanning [bus %02x-%02x] behind bridge, pass %d\012"
drivers/pci/probe.c:921 [probe]pci_register_host_bridge =_ "bus already known\012"
drivers/gpio/gpiolib-acpi.c:1073 [gpiolib_acpi]acpi_dev_gpio_irq_get_by =_ "IRQ %d already in use\012"
drivers/gpio/gpiolib-acpi.c:948 [gpiolib_acpi]acpi_find_gpio =_ "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\012"
drivers/gpio/gpiolib-acpi.c:889 [gpiolib_acpi]acpi_get_gpiod_by_index =_ "GPIO: looking up %d in _CRS\012"
drivers/gpio/gpiolib-acpi.c:885 [gpiolib_acpi]acpi_get_gpiod_by_index =_ "GPIO: _DSD returned %s %d %u %u\012"
drivers/gpio/gpiolib-acpi.c:878 [gpiolib_acpi]acpi_get_gpiod_by_index =_ "GPIO: looking up %s\012"
drivers/gpio/gpiolib-acpi.c:688 [gpiolib_acpi]acpi_gpio_update_gpiod_flags =_ "Override GPIO initialization flags\012"
drivers/gpio/gpiolib-cdev.c:2543 [gpiolib_cdev]gpiolib_cdev_register =_ "(%s): added GPIO chardev (%d:%d)\012"
drivers/gpio/gpiolib-cdev.c:2316 [gpiolib_cdev]lineinfo_changed_notify =_ "lineinfo event FIFO is full - event dropped\012"
drivers/gpio/gpiolib-cdev.c:1820 [gpiolib_cdev]lineevent_irq_thread =_ "event FIFO is full - event dropped\012"
drivers/gpio/gpiolib-cdev.c:1545 [gpiolib_cdev]linereq_create =_ "registered chardev handle for %d lines\012"
drivers/gpio/gpiolib-cdev.c:1515 [gpiolib_cdev]linereq_create =_ "registered chardev handle for line %d\012"
drivers/gpio/gpiolib-cdev.c:719 [gpiolib_cdev]debounce_work_func =_ "debouncer failed to read line value\012"
drivers/gpio/gpiolib-cdev.c:598 [gpiolib_cdev]linereq_put_event =_ "event FIFO is full - event dropped\012"
drivers/gpio/gpiolib-cdev.c:454 [gpiolib_cdev]linehandle_create =_ "registered chardev handle for %d lines\012"
drivers/gpio/gpiolib-cdev.c:422 [gpiolib_cdev]linehandle_create =_ "registered chardev handle for line %d\012"
drivers/gpio/gpiolib.c:4268 [gpiolib]gpiod_get_array =_ "GPIO array info: chip=%s, size=%d, get_mask=%lx, set_mask=%lx, invert_mask=%lx\012"
drivers/gpio/gpiolib.c:3993 [gpiolib]gpiod_get_index =_ "setup of GPIO %s failed\012"
drivers/gpio/gpiolib.c:3964 [gpiolib]gpiod_get_index =_ "No GPIO consumer %s found\012"
drivers/gpio/gpiolib.c:3959 [gpiolib]gpiod_get_index =_ "using lookup tables for GPIO lookup\012"
drivers/gpio/gpiolib.c:3950 [gpiolib]gpiod_get_index =_ "using ACPI for GPIO lookup\012"
drivers/gpio/gpiolib.c:3943 [gpiolib]gpiod_get_index =_ "GPIO lookup for consumer %s\012"
drivers/gpio/gpiolib.c:3903 [gpiolib]gpiod_configure_flags =_ "gpio-%d (%s): no flags found for %s\012"
drivers/gpio/gpiolib.c:2214 [gpiolib]gpio_set_config_with_argument_optional =_ "Persistence not supported for GPIO %d\012"
drivers/gpio/gpiolib.c:2016 [gpiolib]gpiod_request =_ "gpio-%d (%s): %s: status %d\012"
drivers/gpio/gpiolib.c:1869 [gpiolib]gpiochip_add_pin_range =_ "(%s): created GPIO range %d->%d ==> %s PIN %d->%d\012"
drivers/gpio/gpiolib.c:1813 [gpiolib]gpiochip_add_pingroup_range =_ "(%s): created GPIO range %d->%d ==> %s PINGRP %s\012"
drivers/gpio/gpiolib.c:1159 [gpiolib]gpiochip_hierarchy_irq_domain_alloc =_ "(%s): alloc_irqs_parent for %d parent hwirq %d\012"
drivers/gpio/gpiolib.c:1139 [gpiolib]gpiochip_hierarchy_irq_domain_alloc =_ "(%s): found parent hwirq %u\012"
drivers/gpio/gpiolib.c:1131 [gpiolib]gpiochip_hierarchy_irq_domain_alloc =_ "(%s): allocate IRQ %d, hwirq %lu\012"
drivers/gpio/gpiolib.c:535 [gpiolib]gpiochip_setup_dev =_ "registered GPIOs %d to %d on %s\012"
drivers/gpio/gpiolib.c:198 [gpiolib]gpiochip_find_base =_ "%s: found new base at %d\012"
drivers/pinctrl/intel/pinctrl-intel.c:1816 [pinctrl_intel]intel_restore_padcfg =_ "restored pin %u padcfg%u %#08x\012"
drivers/pinctrl/intel/pinctrl-intel.c:1798 [pinctrl_intel]intel_restore_intmask =_ "restored mask %u/%u %#08x\012"
drivers/pinctrl/intel/pinctrl-intel.c:1787 [pinctrl_intel]intel_restore_hostown =_ "restored hostown %u/%u %#08x\012"
drivers/pinctrl/intel/pinctrl-intel.c:1563 [pinctrl_intel]intel_pinctrl_probe =_ "Community%d features: %#08x\012"
drivers/pinctrl/intel/pinctrl-intel.c:1161 [pinctrl_intel]intel_gpio_irq_wake =_ "%sable wake for pin %u\012"
drivers/pinctrl/intel/pinctrl-baytrail.c:1754 [pinctrl_baytrail]byt_gpio_resume =_ "restored pin %d val %#08x\012"
drivers/pinctrl/intel/pinctrl-baytrail.c:1499 [pinctrl_baytrail]byt_init_irq_valid_mask =_ "disabling GPIO %d\012"
drivers/pinctrl/intel/pinctrl-baytrail.c:1496 [pinctrl_baytrail]byt_init_irq_valid_mask =_ "excluding GPIO %d from IRQ domain\012"
drivers/pinctrl/pinctrl-amd.c:1079 [pinctrl_amd]amd_gpio_probe =_ "amd gpio driver loaded\012"
drivers/pinctrl/pinctrl-amd.c:808 [pinctrl_amd]amd_pinconf_set =_ "Invalid config param %04x\012"
drivers/pinctrl/pinctrl-amd.c:755 [pinctrl_amd]amd_pinconf_get =_ "Invalid config param %04x\012"
drivers/pinctrl/pinctrl-amd.c:653 [pinctrl_amd]do_amd_gpio_irq_handler =_ "Disabling spurious GPIO IRQ %d\012"
drivers/pinctrl/pinctrl-amd.c:629 [pinctrl_amd]do_amd_gpio_irq_handler =_ "GPIO %d is active: 0x%x"
drivers/pinctrl/pinconf.c:88 [pinconf]pin_config_group_get =_ "cannot get configuration for pin group, missing group config get function in driver\012"
drivers/pinctrl/pinconf.c:62 [pinconf]pin_config_get_for_pin =_ "cannot get pin configuration, .pin_config_get missing in driver\012"
drivers/pinctrl/pinmux.c:124 [pinmux]pin_request =_ "request pin %d (%s) for %s\012"
drivers/pinctrl/core.c:2105 [core]pinctrl_claim_hogs =_ "failed to lookup the sleep state\012"
drivers/pinctrl/core.c:2092 [core]pinctrl_claim_hogs =_ "failed to lookup the default state\012"
drivers/pinctrl/core.c:2077 [core]pinctrl_claim_hogs =_ "no hogs found\012"
drivers/pinctrl/core.c:2048 [core]pinctrl_init_controller =_ "try to register %d pins ...\012"
drivers/pinctrl/core.c:1425 [core]pinctrl_register_mappings =_ "add %u pinctrl maps\012"
drivers/pinctrl/core.c:1222 [core]pinctrl_lookup_state =_ "using pinctrl dummy state (%s)\012"
drivers/pinctrl/core.c:1136 [core]pinctrl_get =_ "obtain a copy of previously claimed pinctrl\012"
drivers/pinctrl/core.c:733 [core]pinctrl_get_group_selector =_ "found group selector %u for %s\012"
drivers/pinctrl/core.c:242 [core]pinctrl_register_one_pin =_ "registered pin %d (%s) on %s\012"
lib/kobject_uevent.c:574 [kobject_uevent]kobject_uevent_env =_ "kobject: '%s' (%p): %s: uevent() returned %d\012"
lib/kobject_uevent.c:532 [kobject_uevent]kobject_uevent_env =_ "kobject: '%s' (%p): %s: unset subsystem caused the event to drop!\012"
lib/kobject_uevent.c:520 [kobject_uevent]kobject_uevent_env =_ "kobject: '%s' (%p): %s: filter function caused the event to drop!\012"
lib/kobject_uevent.c:512 [kobject_uevent]kobject_uevent_env =_ "kobject: '%s' (%p): %s: uevent_suppress caused the event to drop!\012"
lib/kobject_uevent.c:501 [kobject_uevent]kobject_uevent_env =_ "kobject: '%s' (%p): %s: attempted to send uevent without kset!\012"
lib/kobject_uevent.c:492 [kobject_uevent]kobject_uevent_env =_ "kobject: '%s' (%p): %s\012"
lib/kobject.c:943 [kobject]kset_release =_ "kobject: '%s' (%p): %s\012"
lib/kobject.c:768 [kobject]dynamic_kobj_release =_ "kobject: (%p): %s\012"
lib/kobject.c:718 [kobject]kobject_cleanup =_ "kobject: '%s': free name\012"
lib/kobject.c:711 [kobject]kobject_cleanup =_ "kobject: '%s' (%p): calling ktype release\012"
lib/kobject.c:702 [kobject]kobject_cleanup =_ "kobject: '%s' (%p): auto cleanup kobject_del\012"
lib/kobject.c:697 [kobject]kobject_cleanup =_ "kobject: '%s' (%p): does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.\012"
lib/kobject.c:693 [kobject]kobject_cleanup =_ "kobject: '%s' (%p): %s, parent %p\012"
lib/kobject.c:623 [kobject]__kobject_del =_ "kobject: '%s' (%p): auto cleanup 'remove' event\012"
lib/kobject.c:258 [kobject]kobject_add_internal =_ "kobject: '%s' (%p): %s: parent: '%s', set: '%s'\012"
lib/kobject.c:162 [kobject]fill_kobj_path =_ "kobject: '%s' (%p): %s: path = '%s'\012"
lib/decompress.c:74 [decompress]decompress_method =_ "Compressed data magic: %#.2x %#.2x\012"
lib/pldmfw/pldmfw.c:528 [pldmfw]pldm_verify_header_crc =_ "Invalid CRC in firmware header. Got 0x%08x but expected 0x%08x\012"
lib/pldmfw/pldmfw.c:495 [pldmfw]pldm_parse_components =_ "Invalid firmware header size. Expected %u but got %zu\012"
lib/pldmfw/pldmfw.c:383 [pldmfw]pldm_parse_one_record =_ "Unexpected record length. Measured record length is %zu bytes, expected length is %u bytes\012"
lib/pldmfw/pldmfw.c:239 [pldmfw]pldm_check_desc_tlv_len =_ "Found TLV type 0x%04x with unexpected length. Got %u bytes, but expected %u bytes\012"
lib/pldmfw/pldmfw.c:234 [pldmfw]pldm_check_desc_tlv_len =_ "Found unrecognized TLV type 0x%04x\012"
lib/pldmfw/pldmfw.c:161 [pldmfw]pldm_parse_header =_ "Invalid component bitmap length. The length is %u, which is not a multiple of 8\012"
lib/pldmfw/pldmfw.c:145 [pldmfw]pldm_parse_header =_ "Invalid package header revision. Expected revision %u but got %u\012"
lib/pldmfw/pldmfw.c:139 [pldmfw]pldm_parse_header =_ "Invalid package header identifier. Expected UUID %pUB, but got %pUB\012"
lib/pldmfw/pldmfw.c:71 [pldmfw]pldm_check_fw_space =_ "Firmware file size smaller than expected. Got %zu bytes, needed %zu bytes\012"
lib/asn1_decoder.c:515 [asn1_decoder]asn1_ber_decoder =_ "\012ASN1: %s [m=%zu d=%zu ot=%02x t=%02x l=%zu]\012"
lib/asn1_decoder.c:430 [asn1_decoder]asn1_ber_decoder =_ "- cons len l=%zu d=%zu\012"
lib/asn1_decoder.c:424 [asn1_decoder]asn1_ber_decoder =_ "- continue\012"
lib/asn1_decoder.c:411 [asn1_decoder]asn1_ber_decoder =_ "- continue\012"
lib/asn1_decoder.c:399 [asn1_decoder]asn1_ber_decoder =_ "- end cons t=%zu dp=%zu l=%zu/%zu\012"
lib/asn1_decoder.c:359 [asn1_decoder]asn1_ber_decoder =_ "- MATCH_JUMP\012"
lib/asn1_decoder.c:336 [asn1_decoder]asn1_ber_decoder =_ "- LEAF: %zu\012"
lib/asn1_decoder.c:305 [asn1_decoder]asn1_ber_decoder =_ "- TAG: %02x %zu%s\012"
lib/asn1_decoder.c:247 [asn1_decoder]asn1_ber_decoder =_ "- match? %02x %02x %02x\012"
lib/asn1_decoder.c:234 [asn1_decoder]asn1_ber_decoder =_ "- any %02x\012"
lib/asn1_decoder.c:201 [asn1_decoder]asn1_ber_decoder =_ "next_op: pc=%zu/%zu dp=%zu/%zu C=%d J=%d\012"
lib/bootconfig.c:915 [bootconfig]xbc_debug_dump =_ "[%d] %s (%s) .next=%d, .child=%d .parent=%d\012"
lib/percpu-refcount.c:180 [percpu_refcount]percpu_ref_switch_to_atomic_rcu =_ "global %lu percpu %lu\012"
block/partitions/efi.c:726 [efi]efi_partition =_ "GUID Partition Table is valid!  Yea!\012"
block/partitions/efi.c:610 [efi]find_valid_gpt =_ "Device has a %s MBR\012"
block/partitions/efi.c:437 [efi]is_gpt_valid =_ "GUID Partition Entry Array CRC check failed.\012"
block/partitions/efi.c:425 [efi]is_gpt_valid =_ "GUID Partition Table is too large: %llu > %lu bytes\012"
block/partitions/efi.c:417 [efi]is_gpt_valid =_ "GUID Partition Entry Size check failed.\012"
block/partitions/efi.c:410 [efi]is_gpt_valid =_ "GPT: last_usable_lba incorrect: %lld > %lld\012"
block/partitions/efi.c:404 [efi]is_gpt_valid =_ "GPT: last_usable_lba incorrect: %lld > %lld\012"
block/partitions/efi.c:398 [efi]is_gpt_valid =_ "GPT: first_usable_lba incorrect: %lld > %lld\012"
block/partitions/efi.c:387 [efi]is_gpt_valid =_ "GPT my_lba incorrect: %lld != %lld\012"
block/partitions/efi.c:378 [efi]is_gpt_valid =_ "GUID Partition Table Header CRC is wrong: %x != %x\012"
block/partitions/efi.c:366 [efi]is_gpt_valid =_ "GUID Partition Table Header size is too small: %u < %zu\012"
block/partitions/efi.c:358 [efi]is_gpt_valid =_ "GUID Partition Table Header size is too large: %u > %u\012"
block/partitions/efi.c:348 [efi]is_gpt_valid =_ "GUID Partition Table Header signature is wrong:%lld != %lld\012"
block/partitions/efi.c:217 [efi]is_pmbr_valid =_ "GPT: mbr size in lba (%u) different than whole disk (%u).\012"
crypto/asymmetric_keys/verify_pefile.c:445 [verify_signed_pefile]verify_pefile_signature =_ "Digest: %u [%*ph]\012"
crypto/asymmetric_keys/verify_pefile.c:379 [verify_signed_pefile]pefile_digest_pe =_ "The digests match!\012"
crypto/asymmetric_keys/verify_pefile.c:370 [verify_signed_pefile]pefile_digest_pe =_ "Digest calc = [%*ph]\012"
crypto/asymmetric_keys/verify_pefile.c:349 [verify_signed_pefile]pefile_digest_pe =_ "Digest: desc=%zu size=%zu\012"
crypto/asymmetric_keys/verify_pefile.c:135 [verify_signed_pefile]pefile_strip_sig_wrapper =_ "sig wrapper = { %x, %x, %x }\012"
crypto/asymmetric_keys/verify_pefile.c:106 [verify_signed_pefile]pefile_parse_binary =_ "cert = %x @%x [%*ph]\012"
crypto/asymmetric_keys/verify_pefile.c:82 [verify_signed_pefile]pefile_parse_binary =_ "header size = %x\012"
crypto/asymmetric_keys/verify_pefile.c:81 [verify_signed_pefile]pefile_parse_binary =_ "checksum @ %x\012"
crypto/asymmetric_keys/pkcs7_parser.c:468 [pkcs7_message]pkcs7_note_data =_ "Got data\012"
crypto/asymmetric_keys/pkcs7_parser.c:414 [pkcs7_message]pkcs7_extract_cert =_ "- fingerprint %*phN\012"
crypto/asymmetric_keys/pkcs7_parser.c:413 [pkcs7_message]pkcs7_extract_cert =_ "Got cert %u for %s\012"
crypto/asymmetric_keys/pkcs7_parser.c:392 [pkcs7_message]pkcs7_extract_cert =_ "Cert began with tag %02x at %lu\012"
crypto/asymmetric_keys/pkcs7_verify.c:299 [pkcs7_message]pkcs7_verify_sig_chain =_ "- self-signed\012"
crypto/asymmetric_keys/pkcs7_verify.c:288 [pkcs7_message]pkcs7_verify_sig_chain =_ "- subject %s\012"
crypto/asymmetric_keys/pkcs7_verify.c:274 [pkcs7_message]pkcs7_verify_sig_chain =_ "- top\012"
crypto/asymmetric_keys/pkcs7_verify.c:266 [pkcs7_message]pkcs7_verify_sig_chain =_ "- cmp [%u] %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:262 [pkcs7_message]pkcs7_verify_sig_chain =_ "- want %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:255 [pkcs7_message]pkcs7_verify_sig_chain =_ "- cmp [%u] %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:253 [pkcs7_message]pkcs7_verify_sig_chain =_ "- want %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:244 [pkcs7_message]pkcs7_verify_sig_chain =_ "- self-signed\012"
crypto/asymmetric_keys/pkcs7_verify.c:232 [pkcs7_message]pkcs7_verify_sig_chain =_ "- authkeyid.skid %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:229 [pkcs7_message]pkcs7_verify_sig_chain =_ "- authkeyid.id %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:226 [pkcs7_message]pkcs7_verify_sig_chain =_ "- issuer %s\012"
crypto/asymmetric_keys/pkcs7_verify.c:219 [pkcs7_message]pkcs7_verify_sig_chain =_ "- blacklisted\012"
crypto/asymmetric_keys/pkcs7_verify.c:207 [pkcs7_message]pkcs7_verify_sig_chain =_ "verify %s: %*phN\012"
crypto/asymmetric_keys/pkcs7_verify.c:184 [pkcs7_message]pkcs7_find_key =_ "Sig %u: Issuing X.509 cert not found (#%*phN)\012"
crypto/asymmetric_keys/x509_cert_parser.c:749 [x509_key_parser]x509_akid_note_serial =_ "authkeyid %*phN\012"
crypto/asymmetric_keys/x509_cert_parser.c:737 [x509_key_parser]x509_akid_note_serial =_ "AKID: serial: %*phN\012"
crypto/asymmetric_keys/x509_cert_parser.c:720 [x509_key_parser]x509_akid_note_name =_ "AKID: name: %*phN\012"
crypto/asymmetric_keys/x509_cert_parser.c:706 [x509_key_parser]x509_akid_note_kid =_ "authkeyid %*phN\012"
crypto/asymmetric_keys/x509_cert_parser.c:698 [x509_key_parser]x509_akid_note_kid =_ "AKID: keyid: %*phN\012"
crypto/asymmetric_keys/x509_cert_parser.c:666 [x509_key_parser]x509_decode_time =_ "Got invalid time [tag %02x]: '%*phN'\012"
crypto/asymmetric_keys/x509_cert_parser.c:662 [x509_key_parser]x509_decode_time =_ "Got unsupported time [tag %02x]: '%*phN'\012"
crypto/asymmetric_keys/x509_cert_parser.c:563 [x509_key_parser]x509_process_extension =_ "subjkeyid %*phN\012"
crypto/asymmetric_keys/x509_cert_parser.c:546 [x509_key_parser]x509_process_extension =_ "Extension: %u\012"
crypto/asymmetric_keys/x509_cert_parser.c:294 [x509_key_parser]x509_note_signature =_ "Signature type: %u size %zu\012"
crypto/asymmetric_keys/x509_cert_parser.c:198 [x509_key_parser]x509_note_pkey_algo =_ "PubKey Algo: %u\012"
crypto/asymmetric_keys/x509_cert_parser.c:181 [x509_key_parser]x509_note_tbs_certificate =_ "x509_note_tbs_certificate(,%zu,%02x,%ld,%zu)!\012"
crypto/asymmetric_keys/x509_cert_parser.c:165 [x509_key_parser]x509_note_OID =_ "Unknown OID: [%lu] %s\012"
crypto/asymmetric_keys/asymmetric_type.c:389 [asymmetric_keys]asymmetric_key_preparse =_ "Parser recognised the format (ret %d)\012"
crypto/asymmetric_keys/asymmetric_type.c:385 [asymmetric_keys]asymmetric_key_preparse =_ "Trying parser '%s'\012"
crypto/asymmetric_keys/asymmetric_type.c:112 [asymmetric_keys]find_asymmetric_key =_ "First ID matches, but second does not\012"
crypto/asymmetric_keys/asymmetric_type.c:108 [asymmetric_keys]find_asymmetric_key =_ "First ID matches, but second is missing\012"
crypto/asymmetric_keys/asymmetric_type.c:88 [asymmetric_keys]find_asymmetric_key =_ "Request for key '%s' err %ld\012"
crypto/asymmetric_keys/asymmetric_type.c:83 [asymmetric_keys]find_asymmetric_key =_ "Look up: \042%s\042\012"
crypto/async_tx/async_raid6_recov.c:487 [async_raid6_recov]async_raid6_datap_recov =_ "%s: disks: %d len: %zu\012"
crypto/async_tx/async_raid6_recov.c:404 [async_raid6_recov]async_raid6_2data_recov =_ "%s: disks: %d len: %zu\012"
crypto/async_tx/async_pq.c:384 [async_pq]async_syndrome_val =_ "%s: (sync) disks: %d len: %zu\012"
crypto/async_tx/async_pq.c:320 [async_pq]async_syndrome_val =_ "%s: (async) disks: %d len: %zu\012"
crypto/async_tx/async_pq.c:252 [async_pq]async_gen_syndrome =_ "%s: (sync) disks: %d len: %zu\012"
crypto/async_tx/async_pq.c:203 [async_pq]async_gen_syndrome =_ "%s: (async) disks: %d len: %zu\012"
crypto/async_tx/async_xor.c:368 [async_xor]async_xor_val_offs =_ "%s: (sync) len: %zu\012"
crypto/async_tx/async_xor.c:335 [async_xor]async_xor_val_offs =_ "%s: (async) len: %zu\012"
crypto/async_tx/async_xor.c:226 [async_xor]async_xor_offs =_ "%s (sync): len: %zu\012"
crypto/async_tx/async_xor.c:203 [async_xor]async_xor_offs =_ "%s (async): len: %zu\012"
crypto/async_tx/async_memcpy.c:73 [async_memcpy]async_memcpy =_ "%s: (sync) len: %zu\012"
crypto/async_tx/async_memcpy.c:67 [async_memcpy]async_memcpy =_ "%s: (async) len: %zu\012"
crypto/async_tx/async_tx.c:247 [async_tx]async_trigger_callback =_ "%s: (sync)\012"
crypto/async_tx/async_tx.c:243 [async_tx]async_trigger_callback =_ "%s: (async)\012"
security/integrity/evm/evm_main.c:277 [evm]evm_verify_hmac =_ "digest: (%d) [%*phN]\012"
security/integrity/evm/evm_crypto.c:290 [evm]evm_calc_hmac_or_hash =_ "%s: (%zu) [%*phN]"
security/integrity/evm/evm_crypto.c:280 [evm]evm_calc_hmac_or_hash =_ "file %s: xattr %s size mismatch (kernel: %d, user: %d)\012"
security/integrity/evm/evm_crypto.c:258 [evm]evm_calc_hmac_or_hash =_ "%s: (%zu) [%*phN]\012"
security/integrity/evm/evm_crypto.c:198 [evm]dump_security_xattr =_ "%s: (%zu) %.*s\012"
security/integrity/evm/evm_crypto.c:178 [evm]hmac_add_misc =_ "hmac_misc: (%zu) [%*phN]\012"
security/integrity/ima/ima_fs.c:298 [ima]ima_read_policy =_ "rule: %s\012"
security/integrity/digsig_asymmetric.c:132 [integrity]asymmetric_verify =_ "%s() = %d\012"
security/integrity/digsig_asymmetric.c:77 [integrity]request_asymmetric_key =_ "%s() = 0 [%x]\012"
security/integrity/digsig_asymmetric.c:29 [integrity]request_asymmetric_key =_ "key search: \042%s\042\012"
security/integrity/platform_certs/load_uefi.c:216 [integrity]load_uefi_certs =_ "mokx variable wasn't found\012"
security/integrity/platform_certs/load_uefi.c:201 [integrity]load_uefi_certs =_ "dbx variable wasn't found\012"
security/integrity/platform_certs/load_uefi.c:185 [integrity]load_uefi_certs =_ "MODSIGN: db variable wasn't found\012"
security/integrity/platform_certs/load_uefi.c:146 [integrity]load_moklist_certs =_ "MokListRT variable wasn't found\012"
security/selinux/hooks.c:7574 [selinux]selinux_nf_ip_init =_ "SELinux:  Registering netfilter hooks\012"
security/selinux/hooks.c:7493 [selinux]selinux_complete_init =_ "SELinux:  Setting up existing superblocks.\012"
security/selinux/hooks.c:7490 [selinux]selinux_complete_init =_ "SELinux:  Completing initialization.\012"
security/selinux/hooks.c:7476 [selinux]selinux_init =_ "SELinux:  Starting in permissive mode\012"
security/selinux/hooks.c:7474 [selinux]selinux_init =_ "SELinux:  Starting in enforcing mode\012"
security/selinux/ss/avtab.c:382 [selinux]avtab_hash_eval =_ "SELinux: %s:  %d entries and %d/%d buckets used, longest chain length %d sum of chain length^2 %llu\012"
security/selinux/ss/avtab.c:348 [selinux]avtab_alloc =_ "SELinux: %d avtab hash slots, %d rules.\012"
security/selinux/ss/policydb.c:731 [selinux]policydb_index =_ "SELinux:  %d classes, %d rules\012"
security/selinux/ss/policydb.c:727 [selinux]policydb_index =_ "SELinux:  %d users, %d roles, %d types, %d bools\012"
security/selinux/ss/policydb.c:723 [selinux]policydb_index =_ "SELinux:  %d users, %d roles, %d types, %d bools, %d sens, %d cats\012"
security/inode.c:119 [inode]securityfs_create_dentry =_ "securityfs: creating file '%s'\012"
security/keys/trusted-keys/trusted_tpm2.c:169 [trusted]tpm2_key_type =_ "OID is \042%s\042 which is not TPMSealedData\012"
fs/tracefs/inode.c:407 [tracefs]start_creating =_ "tracefs: creating file '%s'\012"
fs/debugfs/inode.c:330 [debugfs]start_creating =_ "creating file '%s'\012"
fs/autofs/inode.c:321 [autofs4]autofs_fill_super =_ "pipe fd = %d, pgrp = %u\012"
fs/autofs/inode.c:234 [autofs4]autofs_fill_super =_ "starting up, sbi = %p\012"
fs/autofs/inode.c:55 [autofs4]autofs_kill_sb =_ "shutting down\012"
fs/autofs/root.c:868 [autofs4]autofs_root_ioctl_unlocked =_ "cmd = 0x%08x, arg = 0x%08lx, sbi = %p, pgrp = %u\012"
fs/autofs/root.c:840 [autofs4]autofs_ask_umount =_ "may umount %d\012"
fs/autofs/root.c:739 [autofs4]autofs_dir_mkdir =_ "dentry %p, creating %pd\012"
fs/autofs/root.c:684 [autofs4]autofs_dir_rmdir =_ "dentry %p, removing %pd\012"
fs/autofs/root.c:540 [autofs4]autofs_dir_symlink =_ "%s <- %pd\012"
fs/autofs/root.c:491 [autofs4]autofs_lookup =_ "pid = %u, pgrp = %u, catatonic = %d, oz_mode = %d\012"
fs/autofs/root.c:483 [autofs4]autofs_lookup =_ "name = %pd\012"
fs/autofs/root.c:406 [autofs4]autofs_d_manage =_ "dentry=%p %pd\012"
fs/autofs/root.c:318 [autofs4]autofs_d_automount =_ "dentry=%p %pd\012"
fs/autofs/root.c:253 [autofs4]autofs_mount_wait =_ "mount wait done status=%d\012"
fs/autofs/root.c:251 [autofs4]autofs_mount_wait =_ "waiting for mount name=%pd\012"
fs/autofs/root.c:111 [autofs4]autofs_dentry_release =_ "releasing %p\012"
fs/autofs/root.c:81 [autofs4]autofs_dir_open =_ "file=%p dentry=%p %pd\012"
fs/autofs/waitq.c:429 [autofs4]autofs_wait =_ "existing wait id = 0x%08lx, name = %.*s, nfy=%d\012"
fs/autofs/waitq.c:419 [autofs4]autofs_wait =_ "new wait id = 0x%08lx, name = %.*s, nfy=%d\012"
fs/autofs/waitq.c:92 [autofs4]autofs_notify_daemon =_ "wait id = 0x%08lx, name = %.*s, type=%d\012"
fs/autofs/waitq.c:25 [autofs4]autofs_catatonic_mode =_ "entering catatonic mode\012"
fs/autofs/expire.c:523 [autofs4]autofs_expire_wait =_ "expire done status=%d\012"
fs/autofs/expire.c:518 [autofs4]autofs_expire_wait =_ "waiting for expire %p name=%pd\012"
fs/autofs/expire.c:482 [autofs4]autofs_expire_indirect =_ "returning %p %pd\012"
fs/autofs/expire.c:359 [autofs4]should_expire =_ "checking symlink %p %pd\012"
fs/autofs/expire.c:340 [autofs4]should_expire =_ "checking mountpoint %p %pd\012"
fs/autofs/expire.c:252 [autofs4]autofs_check_leaves =_ "dentry %p %pd\012"
fs/autofs/expire.c:248 [autofs4]autofs_check_leaves =_ "parent %p %pd\012"
fs/autofs/expire.c:198 [autofs4]autofs_tree_busy =_ "dentry %p %pd\012"
fs/autofs/expire.c:190 [autofs4]autofs_tree_busy =_ "top %p %pd\012"
fs/autofs/expire.c:155 [autofs4]autofs_direct_busy =_ "top %p %pd\012"
fs/autofs/expire.c:68 [autofs4]autofs_mount_busy =_ "returning = %d\012"
fs/autofs/expire.c:36 [autofs4]autofs_mount_busy =_ "dentry %p %pd\012"
fs/exportfs/expfs.c:150 [exportfs]reconnect_one =_ "lookup failed: %ld\012"
fs/exportfs/expfs.c:147 [exportfs]reconnect_one =_ "%s: found name: %s\012"
fs/exportfs/expfs.c:140 [exportfs]reconnect_one =_ "%s: find name of %lu in %lu\012"
fs/exportfs/expfs.c:135 [exportfs]reconnect_one =_ "get_parent of %lu failed, err %ld\012"
fs/configfs/file.c:92 [configfs]configfs_read_iter =_ "%s: count = %zd, pos = %lld, buf = %s\012"
fs/configfs/dir.c:560 [configfs]detach_attrs =_ "configfs %s: dropping attrs for  dir\012"
fs/configfs/dir.c:400 [configfs]remove_dir =_ " o %pd removing done (%d)\012"
fs/configfs/symlink.c:73 [configfs]configfs_get_target_path =_ "%s: path = '%s'\012"
fs/configfs/symlink.c:67 [configfs]configfs_get_target_path =_ "%s: depth = %d, size = %d\012"
fs/configfs/mount.c:88 [configfs]configfs_fill_super =_ "%s: could not get root dentry!\012"
fs/configfs/mount.c:82 [configfs]configfs_fill_super =_ "could not get root inode\012"
fs/configfs/item.c:123 [configfs]config_item_cleanup =_ "config_item %s: cleaning up\012"
fs/kernfs/dir.c:1345 [dir]__kernfs_remove =_ "kernfs %s: removing\012"
fs/kernfs/mount.c:269 [mount]kernfs_fill_super =_ "%s: could not get root dentry!\012"
fs/kernfs/mount.c:262 [mount]kernfs_fill_super =_ "kernfs: could not get root inode\012"
fs/verity/verify.c:164 [verify]verify_page =_ "Verified hash page at level %d, now want %s:%*phN\012"
fs/verity/verify.c:146 [verify]verify_page =_ "Want root hash: %s:%*phN\012"
fs/verity/verify.c:140 [verify]verify_page =_ "fs-verity: Hash page not yet checked\012"
fs/verity/verify.c:135 [verify]verify_page =_ "fs-verity: Hash page already checked, want %s:%*phN\012"
fs/verity/verify.c:118 [verify]verify_page =_ "fs-verity: Level %d: hindex=%lu, hoffset=%u\012"
fs/verity/verify.c:104 [verify]verify_page =_ "fs-verity: Verifying data page %lu...\012"
fs/verity/open.c:373 [open]fsverity_prepare_setattr =_ "Denying truncate of verity file (ino %lu)\012"
fs/verity/open.c:351 [open]fsverity_file_open =_ "Denying opening verity file (ino %lu) for write\012"
fs/verity/open.c:180 [open]fsverity_create_info =_ "Computed file digest: %s:%*phN\012"
fs/verity/open.c:112 [open]fsverity_init_merkle_tree_params =_ "Level %d is %llu blocks starting at index %llu\012"
fs/verity/open.c:93 [open]fsverity_init_merkle_tree_params =_ "Data is %lld bytes (%llu blocks)\012"
fs/verity/open.c:80 [open]fsverity_init_merkle_tree_params =_ "Merkle tree uses %s with %u-byte blocks (%u hashes/block), salt=%*phN\012"
fs/verity/init.c:52 [init]fsverity_init =_ "Initialized fs-verity\012"
fs/verity/enable.c:291 [enable]enable_verity =_ "Storing a %u-byte PKCS#7 signature alongside the file\012"
fs/verity/enable.c:274 [enable]enable_verity =_ "Done building Merkle tree.  Root hash is %s:%*phN\012"
fs/verity/enable.c:267 [enable]enable_verity =_ "Building Merkle tree...\012"
fs/verity/enable.c:75 [enable]build_merkle_tree_level =_ "Hashing block %llu of %llu for level %u\012"
fs/aio.c:2097 [aio]__do_compat_sys_io_submit =_ "EINVAL: invalid context id\012"
fs/aio.c:2055 [aio]__do_sys_io_submit =_ "EINVAL: invalid context id\012"
fs/aio.c:2005 [aio]io_submit_one =_ "EINVAL: overflow check\012"
fs/aio.c:1995 [aio]io_submit_one =_ "EINVAL: reserve field set\012"
fs/aio.c:1978 [aio]__io_submit_one =_ "invalid aio operation %d\012"
fs/aio.c:1953 [aio]__io_submit_one =_ "EFAULT: aio_key\012"
fs/aio.c:1479 [aio]aio_prep_rw =_ "aio ioprio check cap error: %d\012"
fs/aio.c:1422 [aio]__do_sys_io_destroy =_ "EINVAL: invalid context id\012"
fs/aio.c:1370 [aio]__do_compat_sys_io_setup =_ "EINVAL: ctx %lu nr_events %u\012"
fs/aio.c:1339 [aio]__do_sys_io_setup =_ "EINVAL: ctx %lu nr_events %u\012"
fs/aio.c:1261 [aio]aio_read_events_ring =_ "%li  h%u t%u\012"
fs/aio.c:1217 [aio]aio_read_events_ring =_ "h%u t%u m%u\012"
fs/aio.c:1154 [aio]aio_complete =_ "added to ring %p at [%u]\012"
fs/aio.c:1132 [aio]aio_complete =_ "%p[%u]: %p: %p %Lx %Lx %Lx\012"
fs/aio.c:822 [aio]ioctx_alloc =_ "error allocating ioctx %d\012"
fs/aio.c:805 [aio]ioctx_alloc =_ "allocated ioctx %p[%ld]: mm=%p mask=0x%x\012"
fs/aio.c:742 [aio]ioctx_alloc =_ "ENOMEM: nr_events too high\012"
fs/aio.c:601 [aio]free_ioctx =_ "freeing %p\012"
fs/aio.c:542 [aio]aio_setup_ring =_ "mmap address: 0x%08lx\012"
fs/aio.c:524 [aio]aio_setup_ring =_ "attempting mmap of %lu bytes\012"
fs/aio.c:509 [aio]aio_setup_ring =_ "pid(%d) page[%d]->count=%d\012"
fs/aio.c:312 [aio]aio_free_ring =_ "pid(%d) [%d] page->count=%d\012"
fs/notify/fanotify/fanotify_user.c:1616 [fanotify_user]do_fanotify_mark =_ "%s: fanotify_fd=%d flags=%x dfd=%d pathname=%p mask=%llx\012"
fs/notify/fanotify/fanotify_user.c:1348 [fanotify_user]__do_sys_fanotify_init =_ "%s: flags=%x event_f_flags=%x\012"
fs/notify/fanotify/fanotify_user.c:1295 [fanotify_user]fanotify_add_inode_mark =_ "%s: group=%p inode=%p\012"
fs/notify/fanotify/fanotify_user.c:950 [fanotify_user]fanotify_find_path =_ "%s: dfd=%d filename=%p flags=%x\012"
fs/notify/fanotify/fanotify_user.c:840 [fanotify_user]fanotify_write =_ "%s: group=%p count=%zu\012"
fs/notify/fanotify/fanotify_user.c:751 [fanotify_user]fanotify_read =_ "%s: group=%p\012"
fs/notify/fanotify/fanotify_user.c:625 [fanotify_user]copy_event_to_user =_ "%s: group=%p event=%p\012"
fs/notify/fanotify/fanotify_user.c:381 [fanotify_user]copy_fid_info_to_user =_ "%s: fh_len=%zu name_len=%zu, info_len=%zu, count=%zu\012"
fs/notify/fanotify/fanotify_user.c:311 [fanotify_user]process_access_response =_ "%s: group=%p fd=%d response=%d\012"
fs/notify/fanotify/fanotify_user.c:219 [fanotify_user]get_one_event =_ "%s: group=%p count=%zd\012"
fs/notify/fanotify/fanotify_user.c:196 [fanotify_user]fanotify_unhash_event =_ "%s: group=%p event=%p bucket=%u\012"
fs/notify/fanotify/fanotify.c:929 [fanotify]fanotify_handle_event =_ "%s: group=%p mask=%x report_mask=%x\012"
fs/notify/fanotify/fanotify.c:882 [fanotify]fanotify_insert_event =_ "%s: group=%p event=%p bucket=%u\012"
fs/notify/fanotify/fanotify.c:660 [fanotify]fanotify_alloc_name_event =_ "%s: dir2_fh_len=%u name2_len=%u name2='%.*s'\012"
fs/notify/fanotify/fanotify.c:655 [fanotify]fanotify_alloc_name_event =_ "%s: size=%u dir_fh_len=%u child_fh_len=%u name_len=%u name='%.*s'\012"
fs/notify/fanotify/fanotify.c:307 [fanotify]fanotify_group_event_mask =_ "%s: report_mask=%x mask=%x data=%p data_type=%d\012"
fs/notify/fanotify/fanotify.c:278 [fanotify]fanotify_get_response =_ "%s: group=%p event=%p about to return ret=%d\012"
fs/notify/fanotify/fanotify.c:235 [fanotify]fanotify_get_response =_ "%s: group=%p event=%p\012"
fs/notify/fanotify/fanotify.c:195 [fanotify]fanotify_merge =_ "%s: group=%p event=%p bucket=%u\012"
fs/notify/fanotify/fanotify.c:139 [fanotify]fanotify_should_merge =_ "%s: old=%p new=%p\012"
fs/notify/inotify/inotify_user.c:318 [inotify_user]inotify_ioctl =_ "%s: group=%p cmd=%u\012"
fs/notify/inotify/inotify_user.c:298 [inotify_user]inotify_release =_ "%s: group=%p\012"
fs/notify/inotify/inotify_user.c:260 [inotify_user]inotify_read =_ "%s: group=%p kevent=%p\012"
fs/notify/inotify/inotify_user.c:202 [inotify_user]copy_event_to_user =_ "%s: group=%p event=%p\012"
fs/notify/inotify/inotify_user.c:173 [inotify_user]get_one_event =_ "%s: group=%p event=%p\012"
fs/notify/inotify/inotify_fsnotify.c:77 [inotify_fsnotify]inotify_handle_inode_event =_ "%s: group=%p mark=%p mask=%x\012"
fs/notify/notification.c:170 [notification]fsnotify_remove_first_event =_ "%s: group=%p event=%p\012"
fs/notify/notification.c:91 [notification]fsnotify_insert_event =_ "%s: group=%p event=%p\012"
fs/notify/fsnotify.c:366 [fsnotify]send_to_group =_ "%s: group=%p mask=%x marks_mask=%x marks_ignore_mask=%x data=%p data_type=%d dir=%p cookie=%d\012"
fs/splice.c:753 [splice]warn_unsupported =_ "splice %s not supported for file %pD4 (pid: %d comm: %.20s)\012"
mm/damon/core.c:733 [core]kdamond_fn =_ "kdamond (%d) finishes\012"
mm/cma.c:533 [cma]cma_release =_ "%s(page %p, count %lu)\012"
mm/cma.c:501 [cma]cma_alloc =_ "%s(): returned %p\012"
mm/cma.c:474 [cma]cma_alloc =_ "%s(): memory range at %p is busy, retrying\012"
mm/cma.c:427 [cma]cma_alloc =_ "%s(cma %p, count %lu, align %d)\012"
mm/cma.c:244 [cma]cma_declare_contiguous_nid =_ "%s(size %pa, base %pa, limit %pa alignment %pa)\012"
mm/zpool.c:218 [zpool]zpool_destroy_pool =_ "destroying pool type %s\012"
mm/zpool.c:196 [zpool]zpool_create_pool =_ "created pool type %s\012"
mm/zpool.c:162 [zpool]zpool_create_pool =_ "creating pool type %s\012"
mm/vmpressure.c:144 [vmpressure]vmpressure_calc_level =_ "%s: %3lu  (s: %lu  r: %lu)\012"
mm/huge_memory.c:3065 [huge_memory]split_huge_pages_in_file =_ "%lu of %lu file-backed THP split\012"
mm/huge_memory.c:3031 [huge_memory]split_huge_pages_in_file =_ "split file-backed THPs in file: %s, page offset: [0x%lx - 0x%lx]\012"
mm/huge_memory.c:3006 [huge_memory]split_huge_pages_pid =_ "%lu of %lu THP split\012"
mm/huge_memory.c:2954 [huge_memory]split_huge_pages_pid =_ "Split huge pages in pid: %d, vaddr: [0x%lx - 0x%lx]\012"
mm/huge_memory.c:2913 [huge_memory]split_huge_pages_all =_ "%lu of %lu THP split\012"
mm/huge_memory.c:2882 [huge_memory]split_huge_pages_all =_ "Split all THPs\012"
mm/sparse-vmemmap.c:481 [sparse_vmemmap]altmap_alloc_block_buf =_ "%s: pfn: %#lx alloc: %ld align: %ld nr: %#lx\012"
mm/sparse.c:211 [sparse]subsection_map_init =_ "%s: sec: %lu pfns: %lu set(%d, %d)\012"
mm/mempolicy.c:2625 [mempolicy]mpol_set_shared_policy =_ "set_shared_policy %lx sz %lu %d %d %lx\012"
mm/mempolicy.c:2468 [mempolicy]sp_delete =_ "deleting %lx-l%lx\012"
mm/mempolicy.c:2330 [mempolicy]sp_insert =_ "inserting %lx-%lx: %d\012"
mm/mempolicy.c:1288 [mempolicy]do_mbind =_ "mbind %lx-%lx mode:%d flags:%d nodes:%lx\012"
mm/mempolicy.c:758 [mempolicy]vma_replace_policy =_ "vma %lx-%lx/%lx vm_ops %p vm_file %p set_policy %p\012"
mm/mempolicy.c:263 [mempolicy]mpol_new =_ "setting mode %d flags %d nodes[0] %lx\012"
mm/zswap.c:796 [zswap]__zswap_param_set =_ "%s pool %s/%s\012"
mm/zswap.c:695 [zswap]zswap_pool_destroy =_ "%s pool %s/%s\012"
mm/zswap.c:638 [zswap]zswap_pool_create =_ "%s pool %s/%s\012"
mm/zswap.c:629 [zswap]zswap_pool_create =_ "using %s compressor\012"
mm/zswap.c:615 [zswap]zswap_pool_create =_ "using %s zpool\012"
mm/swapfile.c:1095 [swapfile]get_swap_pages =_ "scan_swap_map of si %d failed to find offset\012"
mm/memory_hotplug.c:2043 [memory_hotplug]offline_pages =_ "memory offlining [mem %#010llx-%#010llx] failed due to %s\012"
mm/memory_hotplug.c:1997 [memory_hotplug]offline_pages =_ "Offlined Pages %ld\012"
mm/memory_hotplug.c:1158 [memory_hotplug]online_pages =_ "online_pages [mem %#010llx-%#010llx] failed\012"
mm/memory_hotplug.c:208 [memory_hotplug]register_memory_resource =_ "Unable to reserve System RAM region: %016llx->%016llx\012"
mm/page_alloc.c:9059 [page_alloc]alloc_contig_dump_pages =_ "migrate failure"
mm/page_alloc.c:7608 [page_alloc]free_area_init_core =_ "  %s zone: %lu pages reserved\012"
mm/page_alloc.c:7598 [page_alloc]free_area_init_core =_ "  %s zone: %lu pages used for memmap\012"
mm/page_alloc.c:7398 [page_alloc]calculate_node_totalpages =_ "On node %d totalpages: %lu\012"
mm/page_alloc.c:7124 [page_alloc]zone_pcp_init =_ "  %s zone: %lu pages, LIFO batch:%u\012"
mm/shuffle.c:138 [page_alloc]__shuffle_zone =_ "%s: swap: %#lx -> %#lx\012"
mm/shuffle.c:132 [page_alloc]__shuffle_zone =_ "%s: migratetype mismatch %#lx\012"
mm/shuffle.c:121 [page_alloc]__shuffle_zone =_ "%s: failed to swap %#lx\012"
mm/util.c:501 [util]__account_locked_vm =_ "%s: [%d] caller %ps %c%lu %lu/%lu%s\012"
kernel/watchdog_hld.c:183 [watchdog_hld]hardlockup_detector_event_create =_ "Perf event create on CPU %d failed with %ld\012"
kernel/cgroup/cgroup.c:5806 [cgroup]cgroup_init_subsys =_ "Initializing cgroup subsys %s\012"
kernel/kexec_file.c:1333 [kexec_file]crash_prepare_elf64_headers =_ "Crash PT_LOAD ELF header. phdr=%p vaddr=0x%llx, paddr=0x%llx, sz=0x%llx e_phnum=%d p_offset=0x%llx\012"
kernel/kexec_file.c:1090 [kexec_file]kexec_purgatory_find_symbol =_ "Symbol: %s has bad section index %d.\012"
kernel/kexec_file.c:392 [kexec_file]__do_sys_kexec_file_load =_ "Loading segment %d: buf=0x%p bufsz=0x%zx mem=0x%lx memsz=0x%zx\012"
kernel/kexec_file.c:185 [kexec_file]kimage_validate_signature =_ "kernel signature verification failed (%d).\012"
kernel/kexec_file.c:106 [kexec_file]kexec_image_verify_sig_default =_ "kernel loader does not support signature verification.\012"
kernel/module.c:4234 [module]__do_sys_finit_module =_ "finit_module: fd=%d, uargs=%p, flags=%i\012"
kernel/module.c:4214 [module]__do_sys_init_module =_ "init_module: umod=%p, len=%lu, uargs=%p\012"
kernel/module.c:3483 [module]move_module =_ "\0110x%lx %s\012"
kernel/module.c:3465 [module]move_module =_ "final section addresses:\012"
kernel/module.c:2744 [module]layout_symtab =_ "\011%s\012"
kernel/module.c:2717 [module]layout_symtab =_ "\011%s\012"
kernel/module.c:2498 [module]layout_sections =_ "\011%s\012"
kernel/module.c:2485 [module]layout_sections =_ "Init section allocation order:\012"
kernel/module.c:2464 [module]layout_sections =_ "\011%s\012"
kernel/module.c:2452 [module]layout_sections =_ "Core section allocation order:\012"
kernel/module.c:2322 [module]simplify_symbols =_ "Absolute symbol: 0x%08lx\012"
kernel/module.c:2314 [module]simplify_symbols =_ "Common symbol: %s\012"
kernel/module.c:1274 [module]check_version =_ "Found checksum %X vs module %lX\012"
kernel/module.c:946 [module]__do_sys_delete_module =_ "%s already dying\012"
kernel/module.c:841 [module]module_unload_free =_ "%s unusing %s\012"
kernel/module.c:800 [module]add_module_usage =_ "Allocating new usage for %s.\012"
kernel/module.c:785 [module]already_uses =_ "%s does not use %s!\012"
kernel/module.c:781 [module]already_uses =_ "%s uses %s!\012"
kernel/module.c:553 [module]find_symbol =_ "Failed to find symbol %s\012"
kernel/freezer.c:81 [freezer]__refrigerator =_ "%s left refrigerator\012"
kernel/freezer.c:63 [freezer]__refrigerator =_ "%s entered refrigerator\012"
kernel/dma/contiguous.c:194 [contiguous]dma_contiguous_reserve =_ "%s: reserving %ld MiB for global area\012"
kernel/dma/contiguous.c:173 [contiguous]dma_contiguous_reserve =_ "%s(limit %08lx)\012"
kernel/irq/msi.c:590 [msi]__msi_domain_alloc_irqs =_ "irq [%d-%d] for MSI\012"
kernel/irq/cpuhotplug.c:169 [cpuhotplug]irq_migrate_all_off_this_cpu =_ "IRQ %u: no longer affine to CPU%u\012"
kernel/irq/cpuhotplug.c:68 [cpuhotplug]migrate_one_irq =_ "IRQ %u: Unable to migrate away\012"
kernel/irq/irqdomain.c:1504 [irqdomain]irq_domain_alloc_irqs_locked =_ "cannot allocate memory for IRQ%d\012"
kernel/irq/irqdomain.c:1497 [irqdomain]irq_domain_alloc_irqs_locked =_ "cannot allocate IRQ(base %d, count %d)\012"
kernel/irq/irqdomain.c:1478 [irqdomain]irq_domain_alloc_irqs_hierarchy =_ "domain->ops->alloc() is NULL\012"
kernel/irq/irqdomain.c:764 [irqdomain]irq_create_mapping_affinity =_ "existing mapping on virq %d\012"
kernel/irq/irqdomain.c:728 [irqdomain]irq_create_mapping_affinity_locked =_ "irq %lu on domain %s mapped to virtual irq %u\012"
kernel/irq/irqdomain.c:719 [irqdomain]irq_create_mapping_affinity_locked =_ "-> virq allocation failed\012"
kernel/irq/irqdomain.c:713 [irqdomain]irq_create_mapping_affinity_locked =_ "irq_create_mapping(0x%p, 0x%lx)\012"
kernel/irq/irqdomain.c:654 [irqdomain]irq_domain_associate_many =_ "%s(%s, irqbase=%i, hwbase=%i, count=%i)\012"
kernel/irq/irqdomain.c:496 [irqdomain]irq_set_default_host =_ "Default domain set to @0x%p\012"
kernel/irq/irqdomain.c:286 [irqdomain]irq_domain_remove =_ "Removed domain %s\012"
kernel/irq/irqdomain.c:229 [irqdomain]__irq_domain_publish =_ "Added domain %s\012"
kernel/irq/manage.c:964 [manage]__irq_set_trigger =_ "No set_type function for IRQ %d (%s)\012"
kernel/printk/printk.c:1223 [printk]boot_delay_setup =_ "boot_delay: %u, preset_lpj: %ld, lpj: %lu, HZ: %d, loops_per_msec: %llu\012"
kernel/power/energy_model.c:162 [energy_model]em_create_perf_table =p "EM: OPP:%lu is inefficient\012"
kernel/async.c:317 [async]async_synchronize_cookie_domain =_ "async_continuing @ %i after %lli usec\012"
kernel/async.c:312 [async]async_synchronize_cookie_domain =_ "async_waiting @ %i\012"
kernel/async.c:129 [async]async_run_entry_fn =_ "initcall %lli_%pS returned after %lld usecs\012"
kernel/async.c:123 [async]async_run_entry_fn =_ "calling  %lli_%pS @ %i\012"
kernel/params.c:177 [params]parse_args =_ "doing %s, parsing ARGS: '%s'\012"
kernel/params.c:156 [params]parse_one =_ "Unknown argument '%s'\012"
kernel/params.c:152 [params]parse_one =_ "doing %s: %s='%s'\012"
kernel/params.c:139 [params]parse_one =_ "handling %s with %p\012"
kernel/cpu.c:1132 [cpu]cpuhp_down_callbacks =_ "CPU DOWN failed (%d) CPU %u state %s (%d)\012"
kernel/cpu.c:734 [cpu]cpuhp_up_callbacks =_ "CPU UP failed (%d) CPU %u state %s (%d)\012"
arch/x86/platform/intel/iosf_mbi.c:390 [iosf_mbi]iosf_mbi_unblock_punit_i2c_access =_ "punit semaphore held for %ums\012"
arch/x86/platform/intel/iosf_mbi.c:358 [iosf_mbi]iosf_mbi_block_punit_i2c_access =_ "P-Unit semaphore acquired after %ums\012"
arch/x86/mm/numa.c:122 [numa]setup_node_to_cpumask_map =_ "Node to cpumask map for %u nodes\012"
arch/x86/mm/init_64.c:1698 [init_64]vmemmap_populate_print_last =_ " [%lx-%lx] PMD -> [%p-%p] on node %d\012"
arch/x86/mm/init_64.c:1576 [init_64]vmemmap_populate_hugepages =_ " [%lx-%lx] PMD -> [%p-%p] on node %d\012"
arch/x86/mm/init_64.c:325 [init_64]set_pte_vaddr =_ "set_pte_vaddr %lx to %lx\012"
arch/x86/mm/init_64.c:239 [init_64]spp_getpage =_ "spp_getpage %p\012"
arch/x86/mm/init.c:554 [init]init_memory_mapping =_ "init_memory_mapping: [mem %#010lx-%#010lx]\012"
arch/x86/mm/init.c:507 [init]split_mem_range =_ " [mem %#010lx-%#010lx] page %s\012"
arch/x86/kernel/hpet.c:647 [hpet]hpet_setup_msi_irq =_ "%s irq %u for MSI\012"
arch/x86/kernel/hpet.c:466 [hpet]hpet_legacy_clockevent_register =_ "Clockevent registered\012"
arch/x86/kernel/kexec-bzimage64.c:456 [kexec_bzimage64]bzImage64_load =_ "Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\012"
arch/x86/kernel/kexec-bzimage64.c:441 [kexec_bzimage64]bzImage64_load =_ "Loaded 64bit kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\012"
arch/x86/kernel/kexec-bzimage64.c:426 [kexec_bzimage64]bzImage64_load =_ "Loaded boot_param, command line and misc at 0x%lx bufsz=0x%lx memsz=0x%lx\012"
arch/x86/kernel/kexec-bzimage64.c:387 [kexec_bzimage64]bzImage64_load =_ "Loaded purgatory at 0x%lx\012"
arch/x86/kernel/kexec-bzimage64.c:366 [kexec_bzimage64]bzImage64_load =_ "Appending elfcorehdr=<addr> to command line exceeds maximum allowed length\012"
arch/x86/kernel/kexec-bzimage64.c:318 [kexec_bzimage64]bzImage64_probe =_ "It's a relocatable bzImage64\012"
arch/x86/kernel/kexec-bzimage64.c:308 [kexec_bzimage64]bzImage64_probe =_ "EFI is 32 bit. Can't load kernel above 4G.\012"
arch/x86/kernel/kexec-bzimage64.c:85 [kexec_bzimage64]setup_cmdline =_ "Final command line is: %s\012"
arch/x86/kernel/crash.c:392 [crash]crash_load_segments =_ "Loaded ELF headers at 0x%lx bufsz=0x%lx memsz=0x%lx\012"
arch/x86/kernel/machine_kexec_64.c:450 [machine_kexec_64]arch_kexec_apply_relocations_add =_ "Symbol: %s info: %02x shndx: %02x value=%llx size: %llx\012"
arch/x86/kernel/machine_kexec_64.c:414 [machine_kexec_64]arch_kexec_apply_relocations_add =_ "Applying relocate section %s to %u\012"
arch/x86/kernel/apic/vector.c:1306 [vector]print_PIC =_ "... PIC ELCR: %04x\012"
arch/x86/kernel/apic/vector.c:1303 [vector]print_PIC =_ "... PIC  ISR: %04x\012"
arch/x86/kernel/apic/vector.c:1293 [vector]print_PIC =_ "... PIC  IRR: %04x\012"
arch/x86/kernel/apic/vector.c:1290 [vector]print_PIC =_ "... PIC  IMR: %04x\012"
arch/x86/kernel/apic/vector.c:1285 [vector]print_PIC =_ "\012printing PIC contents\012"
arch/x86/kernel/apic/vector.c:1255 [vector]print_local_APIC =_ "... APIC EILVT%d: %08x\012"
arch/x86/kernel/apic/vector.c:1252 [vector]print_local_APIC =_ "... APIC ECTRL: %08x\012"
arch/x86/kernel/apic/vector.c:1250 [vector]print_local_APIC =_ "... APIC EFEAT: %08x\012"
arch/x86/kernel/apic/vector.c:1245 [vector]print_local_APIC =_ "... APIC TDCR: %08x\012"
arch/x86/kernel/apic/vector.c:1243 [vector]print_local_APIC =_ "... APIC TMCCT: %08x\012"
arch/x86/kernel/apic/vector.c:1241 [vector]print_local_APIC =_ "... APIC TMICT: %08x\012"
arch/x86/kernel/apic/vector.c:1237 [vector]print_local_APIC =_ "... APIC LVTERR: %08x\012"
arch/x86/kernel/apic/vector.c:1232 [vector]print_local_APIC =_ "... APIC LVT1: %08x\012"
arch/x86/kernel/apic/vector.c:1230 [vector]print_local_APIC =_ "... APIC LVT0: %08x\012"
arch/x86/kernel/apic/vector.c:1227 [vector]print_local_APIC =_ "... APIC LVTPC: %08x\012"
arch/x86/kernel/apic/vector.c:1222 [vector]print_local_APIC =_ "... APIC LVTT: %08x\012"
arch/x86/kernel/apic/vector.c:1219 [vector]print_local_APIC =_ "... APIC ICR2: %08x\012"
arch/x86/kernel/apic/vector.c:1218 [vector]print_local_APIC =_ "... APIC ICR: %08x\012"
arch/x86/kernel/apic/vector.c:1214 [vector]print_local_APIC =_ "... APIC ESR: %08x\012"
arch/x86/kernel/apic/vector.c:1204 [vector]print_local_APIC =_ "... APIC IRR field:\012"
arch/x86/kernel/apic/vector.c:1202 [vector]print_local_APIC =_ "... APIC TMR field:\012"
arch/x86/kernel/apic/vector.c:1200 [vector]print_local_APIC =_ "... APIC ISR field:\012"
arch/x86/kernel/apic/vector.c:1198 [vector]print_local_APIC =_ "... APIC SPIV: %08x\012"
arch/x86/kernel/apic/vector.c:1195 [vector]print_local_APIC =_ "... APIC DFR: %08x\012"
arch/x86/kernel/apic/vector.c:1192 [vector]print_local_APIC =_ "... APIC LDR: %08x\012"
arch/x86/kernel/apic/vector.c:1188 [vector]print_local_APIC =_ "... APIC RRR: %08x\012"
arch/x86/kernel/apic/vector.c:1179 [vector]print_local_APIC =_ "... APIC PROCPRI: %08x\012"
arch/x86/kernel/apic/vector.c:1175 [vector]print_local_APIC =_ "... APIC ARBPRI: %08x (%02x)\012"
arch/x86/kernel/apic/vector.c:1169 [vector]print_local_APIC =_ "... APIC TASKPRI: %08x (%02x)\012"
arch/x86/kernel/apic/vector.c:1159 [vector]print_local_APIC =_ "printing local APIC contents on CPU#%d/%d:\012"
arch/x86/kernel/setup_percpu.c:119 [setup_percpu]pcpu_alloc_bootmem =_ "per cpu data for cpu%d %lu bytes on node%d at %016lx\012"
arch/x86/kernel/setup_percpu.c:112 [setup_percpu]pcpu_alloc_bootmem =_ "per cpu data for cpu%d %lu bytes at %016lx\012"
arch/x86/kernel/tsc_sync.c:398 [tsc_sync]check_tsc_sync_source =_ "TSC synchronization [CPU#%d -> CPU#%d]: passed\012"
arch/x86/kernel/smpboot.c:2141 [smpboot]init_freq_invariance =_ "Couldn't determine max cpu frequency, necessary for scale-invariant accounting.\012"
arch/x86/kernel/smpboot.c:2060 [smpboot]amd_set_max_freq_ratio =_ "Could not retrieve highest or nominal performance\012"
arch/x86/kernel/smpboot.c:2052 [smpboot]amd_set_max_freq_ratio =_ "Could not retrieve perf counters (%d)\012"
arch/x86/kernel/smpboot.c:2032 [smpboot]intel_set_max_freq_ratio =_ "Non-zero turbo and base frequencies led to a 0 ratio.\012"
arch/x86/kernel/smpboot.c:2026 [smpboot]intel_set_max_freq_ratio =_ "Couldn't determine cpu base or turbo frequency, necessary for scale-invariant accounting.\012"
arch/x86/kernel/smpboot.c:1434 [smpboot]native_smp_cpus_done =_ "Boot done\012"
arch/x86/kernel/smpboot.c:1170 [smpboot]native_cpu_up =_ "do_boot_cpu %d Already started\012"
arch/x86/kernel/smpboot.c:1157 [smpboot]native_cpu_up =_ "++++++++++++++++++++=_---CPU UP  %u\012"
arch/x86/kernel/smpboot.c:1071 [smpboot]do_boot_cpu =_ "Setting warm reset code and vector.\012"
arch/x86/kernel/smpboot.c:906 [smpboot]wakeup_secondary_cpu_via_init =_ "After Startup\012"
arch/x86/kernel/smpboot.c:889 [smpboot]wakeup_secondary_cpu_via_init =_ "Waiting for send to finish...\012"
arch/x86/kernel/smpboot.c:887 [smpboot]wakeup_secondary_cpu_via_init =_ "Startup point 1\012"
arch/x86/kernel/smpboot.c:867 [smpboot]wakeup_secondary_cpu_via_init =_ "After apic_write\012"
arch/x86/kernel/smpboot.c:863 [smpboot]wakeup_secondary_cpu_via_init =_ "Sending STARTUP #%d\012"
arch/x86/kernel/smpboot.c:860 [smpboot]wakeup_secondary_cpu_via_init =_ "#startup loops: %d\012"
arch/x86/kernel/smpboot.c:841 [smpboot]wakeup_secondary_cpu_via_init =_ "Waiting for send to finish...\012"
arch/x86/kernel/smpboot.c:835 [smpboot]wakeup_secondary_cpu_via_init =_ "Deasserting INIT\012"
arch/x86/kernel/smpboot.c:830 [smpboot]wakeup_secondary_cpu_via_init =_ "Waiting for send to finish...\012"
arch/x86/kernel/smpboot.c:819 [smpboot]wakeup_secondary_cpu_via_init =_ "Asserting INIT\012"
arch/x86/kernel/smpboot.c:792 [smpboot]wakeup_secondary_cpu_via_nmi =_ "NMI sent\012"
arch/x86/kernel/smpboot.c:779 [smpboot]wakeup_secondary_cpu_via_nmi =_ "Waiting for send to finish...\012"
arch/x86/kernel/smpboot.c:682 [smpboot]impress_friends =_ "Before bogocount - setting activated=1\012"
arch/x86/kernel/smpboot.c:673 [smpboot]impress_friends =_ "Before bogomips\012"
arch/x86/kernel/smpboot.c:215 [smpboot]smp_callin =_ "Stack at about %p\012"
arch/x86/kernel/acpi/boot.c:1133 [boot]mp_config_acpi_legacy_irqs =_ "ACPI: IRQ%d used by override.\012"
arch/x86/kernel/acpi/boot.c:1095 [boot]mp_config_acpi_legacy_irqs =_ "Bus #%d is ISA (nIRQs: %d)\012"
arch/x86/kernel/acpi/boot.c:969 [boot]acpi_parse_fadt =_ "probing for VGA not safe\012"
arch/x86/kernel/acpi/boot.c:964 [boot]acpi_parse_fadt =_ "not registering RTC platform device\012"
arch/x86/kernel/acpi/boot.c:959 [boot]acpi_parse_fadt =_ "i8042 controller is absent\012"
arch/x86/kernel/acpi/boot.c:952 [boot]acpi_parse_fadt =_ "no legacy devices present\012"
arch/x86/kernel/acpi/boot.c:139 [boot]acpi_parse_madt =_ "Local APIC address 0x%08x\012"
arch/x86/kernel/cpu/sgx/ioctl.c:603 [ioctl]sgx_encl_init =_ "EINIT returned %d\012"
arch/x86/kernel/cpu/microcode/core.c:740 [microcode]mc_cpu_down_prep =_ "CPU%d removed\012"
arch/x86/kernel/cpu/microcode/core.c:720 [microcode]mc_cpu_starting =_ "CPU%d added\012"
arch/x86/kernel/cpu/microcode/core.c:687 [microcode]mc_device_remove =_ "CPU%d removed\012"
arch/x86/kernel/cpu/microcode/core.c:668 [microcode]mc_device_add =_ "CPU%d added\012"
arch/x86/kernel/cpu/microcode/core.c:641 [microcode]microcode_init_cpu =_ "CPU%d updated upon init\012"
arch/x86/kernel/cpu/microcode/core.c:619 [microcode]microcode_resume_cpu =_ "CPU%d updated upon resume\012"
arch/x86/kernel/cpu/microcode/intel.c:937 [microcode]request_microcode_fw =_ "data file %s load failed\012"
arch/x86/kernel/cpu/microcode/intel.c:891 [microcode]generic_load_microcode =_ "CPU%d found a matching microcode update with version 0x%x (current=0x%x)\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:790 [cleanup]mtrr_cleanup =_ "New variable MTRRs\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:746 [cleanup]mtrr_cleanup =_ "New variable MTRRs\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:714 [cleanup]mtrr_cleanup =_ "original variable MTRRs\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:545 [cleanup]print_out_mtrr_range_state =_ "reg %d, base: %ld%cB, range: %ld%cB, type %s\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:398 [cleanup]range_to_mtrr_with_hole =_ "hole: %016lx - %016lx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:388 [cleanup]range_to_mtrr_with_hole =_ "range: %016lx - %016lx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:377 [cleanup]range_to_mtrr_with_hole =_ "range0: %016lx - %016lx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:332 [cleanup]range_to_mtrr_with_hole =_ "rangeX: %016lx - %016lx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:277 [cleanup]range_to_mtrr =_ "Setting variable MTRR %d, base: %ld%cB, range: %ld%cB, type %s\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:130 [cleanup]x86_get_mtrr_mem_range =_ "MTRR MAP PFN: %016llx - %016llx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:128 [cleanup]x86_get_mtrr_mem_range =_ "After sorting\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:120 [cleanup]x86_get_mtrr_mem_range =_ "MTRR MAP PFN: %016llx - %016llx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:116 [cleanup]x86_get_mtrr_mem_range =_ "After UC checking\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:85 [cleanup]x86_get_mtrr_mem_range =_ "MTRR MAP PFN: %016llx - %016llx\012"
arch/x86/kernel/cpu/mtrr/cleanup.c:83 [cleanup]x86_get_mtrr_mem_range =_ "After WB checking\012"
arch/x86/kernel/cpu/mtrr/generic.c:444 [generic]print_mtrr_state =_ "TOM2: %016llx aka %lldM\012"
arch/x86/kernel/cpu/mtrr/generic.c:441 [generic]print_mtrr_state =_ "  %u disabled\012"
arch/x86/kernel/cpu/mtrr/generic.c:431 [generic]print_mtrr_state =_ "  %u base %0*X%05X000 mask %0*X%05X000 %s\012"
arch/x86/kernel/cpu/mtrr/generic.c:425 [generic]print_mtrr_state =_ "MTRR variable ranges %sabled:\012"
arch/x86/kernel/cpu/mtrr/generic.c:410 [generic]print_mtrr_state =_ "MTRR fixed ranges %sabled:\012"
arch/x86/kernel/cpu/mtrr/generic.c:407 [generic]print_mtrr_state =_ "MTRR default type: %s\012"
arch/x86/kernel/cpu/mtrr/generic.c:365 [generic]print_fixed_last =_ "  %05X-%05X %s\012"
arch/x86/kernel/cpu/mtrr/mtrr.c:500 [mtrr]mtrr_del_page =_ "no MTRR for %lx000,%lx000 found\012"
arch/x86/kernel/cpu/mtrr/mtrr.c:409 [mtrr]mtrr_check =_ "size: 0x%lx  base: 0x%lx\012"
arch/x86/kernel/cpu/common.c:2217 [common]cpu_init =_ "Initializing CPU#%d\012"
arch/x86/kernel/tboot.c:71 [tboot]check_tboot_version =_ "tboot_size: 0x%x\012"
arch/x86/kernel/tboot.c:70 [tboot]check_tboot_version =_ "tboot_base: 0x%08x\012"
arch/x86/kernel/tboot.c:69 [tboot]check_tboot_version =_ "shutdown_entry: 0x%x\012"
arch/x86/kernel/tboot.c:68 [tboot]check_tboot_version =_ "log_addr: 0x%08x\012"
arch/x86/kernel/tboot.c:67 [tboot]check_tboot_version =_ "version: %d\012"
arch/x86/events/intel/pt.c:784 [pt]pt_topa_dump =_ "# entry @%p (%lx sz %u %c%c%c) raw=%16llx\012"
arch/x86/events/intel/pt.c:781 [pt]pt_topa_dump =_ "# table @%p, off %llx size %zx\012"
arch/x86/events/amd/ibs.c:971 [ibs]force_ibs_eilvt_setup =_ "No EILVT entry available\012"
arch/x86/events/amd/ibs.c:942 [ibs]setup_ibs_ctl =_ "No CPU node configured for IBS\012"
arch/x86/events/amd/ibs.c:935 [ibs]setup_ibs_ctl =_ "Failed to setup IBS LVT offset, IBSCTL = 0x%08x\012"
init/initramfs.c:513 [initramfs]unpack_to_rootfs =_ "Detected %s compressed data\012"
init/main.c:1433 [main]run_init_process =p "    %s\012"
init/main.c:1431 [main]run_init_process =p "  with environment:\012"
init/main.c:1430 [main]run_init_process =p "    %s\012"
init/main.c:1428 [main]run_init_process =p "  with arguments:\012"
init/main.c:1218 [main]initcall_blacklisted =p "initcall %s blacklisted\012"
init/main.c:1179 [main]initcall_blacklist =p "blacklisting initcall %s\012"